House of a vertical beam: features of construction, technology, projects and reviews

Vertical bar is considered a relatively new technology in house building. The name indicates that the facing and supporting elements that make up the walls are not mounted horizontally, but vertically.

Features of construction

If you decide to build a house from a vertical beam, you should know what the elements of the walls are. These are vertical bars, in the process of making cuts are made. They exclude the possibility of deformation of the material. In the process of construction work, the beams are mounted vertically, so that the components are maximally conjugated. This is provided by the crests and grooves of the profile. In the assembled form and in the cut, the bars are reminded of a complex puzzle. The joints formed between them are closed by internal and external segments. The walls can have absolutely different thickness and shape. If you build a house from a vertical beam, you should know that this technique assumes a more impressive load on the material than with horizontal technology.

Requirements for timber

If you decide to build a house from a vertical beam, you should choose a material that has no defects and knots, since they can affect the strength of the walls. Among other things, the lumber should be dried under ideal conditions. First the bars are naturally dried in the open air, only after they enter a special chamber. In the end, you should get wood, the moisture level of which is not more than 12%.

Positive reviews

The house from a vertical bar, as owners of such habitation assert, has a lot of pluses. Among them, there is no shrinkage. This is due to the fact that the change in the size of wooden products is not along, but across the fibers. Homeowners like the fact that vertical bars are better able to retain heat. Home masters prefer this technology more often because of the readiness of all elements for construction. Houses from a vertical beam, reviews about which you can read in the article, do not need the availability of finishes and seals. As for facing slats, they can be made of different wood. Those who have used such housing for more than one year, notes that the vertical arrangement withstands a more impressive load. Experts in support of this note that this ability is increased in similar buildings 8 times. Designers have the opportunity to design a wide variety of houses. Interior decoration can be carried out immediately after the installation of vertical bars, which is impossible with wooden housing construction, where other technologies are used. Consumers build houses from a vertical beam, whose projects you can consider in the article, but you can create a project for yourself. The log, due to its low weight, can be mounted without the use of lifting mechanisms and complicated construction equipment.

Negative feedback

This modern technique has its drawbacks. The main one is expressed in the fact that the manufacture of elements requires the use of high-tech special equipment. Therefore, the private consumer has the opportunity only to purchase material, which he will use in the future. Houses from a vertical bar, which projects you can order from professionals, are built, as a rule, without attic floors. This is due to the fact that this technology involves the creation of inconveniences in the installation of attic rooms.

Choosing a foundation

Houses from a vertical bar, reviews about which you can read above, have insignificant weight. This indicates the possibility of saving even at the stage of foundation of the foundation. That's why you can use the traditional tape structure, which allows you to equip the basement. If there is a desire, then you can build a columnar foundation, with the support to be connected with a single strapping, which will be installed logs. Construction of houses from a vertical bar at the first stage involves the preparation of a pit, the bottom of which is leveled, and also covered with a pillow of rubble and sand. At the next stage, the formwork is mounted, and reinforcement is also made. After that, you can start pouring the ribbon foundation. Before continuing any further work, let the concrete dry out well. The beam should be installed exclusively on the layer of waterproofing, which will eliminate the interaction of materials with moisture.

Construction technology

Houses on the technology of a vertical beam are erected on the type of a children's designer. The beam is to be combined into a single system, using grooves. To ensure that the logs in the first stage do not deviate from the vertical plane, it is necessary to perform a leveling survey by fixing the dowels. You can be sure that the work will be completed in the shortest possible time, because one beam will just need to be put to the next. The angles are monolithic, but there are no unique elements. A constructor that has the same elements will be assembled very quickly. Inside there are air cavities, which increase the heat-insulating quality of the house.

Projects

Houses on the described technology are most often erected in one floor. However, on the existing territory you can arrange all necessary rooms and utility rooms. The article presents several variants of the project, one of which you can use for your own needs. However, experts recommend that they turn to the professionals of their business who will draw up the project according to the available territory. Do not count especially on the fact that the house will have a second floor, but with this issue still it is worth contacting the developer.