Fungus on the wall: how to bring out forever

Fungus and fungus on the walls are often manifested in different parts of the house or apartment. A similar problem can arise for everyone, so it can be called universal in this sense. It is noteworthy that it is unrealistically difficult to combat this phenomenon, therefore, in this article, not only the reasons for the occurrence of such, but also practical recommendations for effective removal of fungus and mold for a long period will be described in more detail. Among other things, it will be quite informative to read more about the basic safety measures that will allow you to avoid fungus and mold in the future.

Moisture as the main cause of fungus occurrence

In the bathroom or in the attic, you can often meet a fungus on the wall. How to deduce it, we will consider a little bit more low, but for the beginning it is necessary to reveal the reason of occurrence of such unpleasant phenomenon.

The fungus on the walls in the apartment appears mainly because of the destructive effect of moisture. The moisture in the room appears due to several reasons:

• Error in laying insulation;
• Excessive freezing of walls;
• Malfunction of the ventilation system.

As for the malfunction of the ventilation system, please note that the presence of plastic windows in the premises with too high a level of moisture can only contribute more to the rapid development of the fungus and the creation of an unfavorable microclimate.

The malfunction of the ventilation system and the bathroom is the ideal ratio, which will lead to the appearance of a fungus on the wall. In the bathroom, this problem is generally No. 1. The angles of the walls are most at risk of rapid development of fungus and mold, because they are ventilated worst of all. Therefore, you need to ensure that the ventilation of the room is carried out often enough, or to install a special air conditioning system. The choice is always just for you.

The freezing of walls can be easily detected, because such a factor immediately manifests a dark tinge in the corners or on the edges of the wall itself. In this case, you should immediately dry the damaged areas, and after that, you must check the adhesion of the plaster.

The less popular causes of problems

Did you notice the streams that appeared where the walls are connected to the ground floor of the ground floor, or, possibly, to the basement? This is how the damage to the horizontal insulation of the foundation walls looks. The moisture that comes from the soil, is the reason for the appearance of mold and fungus. Before they have time to prove themselves, you should dry the walls, and in case of blotting the floor, remove its fragment. A specialized company will be engaged in similar repairs.

No less important symptom of the fact that soon there will be mold, as well as a fungus, there will be an unsatisfactory condition of water supply. Fungus in the house on the walls arises in this case as a result of the fact that moisture appears along the pipes themselves. Then you can still detect traces of moisture at the edge of the bathtub. The only way out of such an unpleasant situation will be drying. If you notice all this late, the fungus will grow insanely fast, and you can not do without repair.

Flows on the plaster itself also arise as a result of the leakage or gutter. For example, during a heavy rainy season, a similar problem is natural, so it is nothing special. The only thing is that if you continue to leave all such leaks unattended, it will lead to more serious consequences. This is particularly true of winter, because then the moisture can simply freeze in the plaster, and the appearance of the fungus will be guaranteed to you.

Surface that is susceptible to fungal manifestation

The fungus on the walls in the apartment is an unpleasant sight, because it appears not only on the surface of a brick, but also on a tree. It is noteworthy that the fungus from the brick is much easier to destroy than from the tree. This is due precisely to the fact that its growth rates are fast enough, and the tree retains moisture better than brick. That is why wood creates all the necessary conditions for the development of mold and fungus.

Based on the data obtained, it can easily be concluded that even furniture and structural elements are at risk of infection. The main recommendation in this case can serve only prevention. It is necessary to process all furniture with special means even before you bring it into the house.

There was a fungus on the wall - how to withdraw?

Before removing the fungus, it is necessary to clarify the reasons for which it appeared initially. If you do not do this and just get rid of the consequences, then the repeated appearance of fungus and mold will be quite logical and justified. That is why we first considered the possible causes of the problem.

Proceeding from the revealed reason, your wall will be prescribed "treatment", the result of which you will be surely satisfied.

The first stage when removing the fungus

Damaged part of the wall must be checked for the presence of a void between the plaster and the wall itself. This is called "check the clutch". It is very easy to implement such a thing - tapping with a hammer and listening. If you hear a deaf sound, then be sure that the separation of the plaster has occurred, which led to its unfitness for further operation. In this case, it is completely removed.

If you have not heard anything like this, then the plaster is completely usable, therefore, the fungus on the walls is used, provided that the instructions are strictly observed.

Important conditions for fungus removal

An important condition that must be observed is that the surface of the wall treated with a special agent should be moistened with plenty of water. This is necessary due to the fact that the fungus and mold are transferred through a dispute. When we have wet the necessary area, they will not have any opportunity to spread through the air throughout the room.

It should also be taken into account that processing is worth it with a margin. That is, with a kind of indentation to about 1 meter. After all, you do not want to leave new incipient layers of fungus and mold?

You have only one question, when the fungus appeared on the wall: "How to get it out without much effort?" Without much effort, of course, it will not work out, but it's possible to get rid of the problem once and for all, if you use a roller, a brush or a special spray gun to apply special tools.

An excellent remedy for fungi on the walls - drugs-fungicides, which are offered in the form of a spray. They are usually used to treat small damaged areas, and in several layers. That is, as soon as one layer dries, it is immediately worthwhile to apply another one. Usually stop at two or three.

Safety measures at work

Means against the fungus on the walls require you to strictly follow the elementary rules of safety when working with them. First, it concerns special means of protection. Protective mask, gloves and goggles will limit your contact with spores of mold to a minimum, because everyone knows that inhaling them is dangerous to health.

The room in which you work must necessarily be well ventilated - this will exclude the subsidence of small fungal particles flying in the air to new uninfected areas of the wall.

After you have already processed everything, all infected with fungus and mold fragments should immediately be burned. And work in the room can be resumed at least two days after the completion of all necessary procedures.

The process of removing damaged sections of the wall

In order to remove completely the fungus and mold, it is necessary to take a drill with an iron brush or simply a metal brush. With the help of such simple tools, you can most thoroughly clean the wall.

There are, of course, cases when the fungus penetrates very deeply into the material, so surface cleaning will be ineffective. It can help to eliminate visible manifestations of such infection, and the main mycelium will remain untouched. In this case, the optimal solution to such a complex problem will be the complete removal of the damaged fragment. If this is not done on time, then in the future because of the rapid development of the fungus, the mycelium will be even deeper in the wall. This will lead to the need to delete the entire section of the wall sooner or later.

The best remedy against fungus on the walls

In any case, fungicides are the most optimal option that helps to remove the fungus. Such preparations have in their composition boron compounds, so they are quite versatile and can be used not only inside the building, but also outside. A huge plus is that they do not have to search very long. It is because of its effectiveness that fungicides are quite popular and their choice is very wide.

Fungus on the walls in the apartment can be removed as with fungicides, which are designed to destroy any kind of fungus, and with the help of those that are used individually for each species. In any case, you will have to consult with experts in advance about this and choose the most suitable option for yourself.

Special paints

Conveniently, the modern market can offer us a variety of tools to combat various pests. This also applies in full to the fight against mold and fungus.

There are several colors that effectively deal with this role:

• Fungicidal dispersion;
• Of silicone resin;
• Silicate.

They can be used both inside the building and outside. When using them, do not forget about the preliminary priming of the wall surface.

The most popular fungicide

The drug "Atlas Mykos" is considered according to the latest reviews of its customers the most effective means. Its versatility is striking, because it can remove not only mold and fungus, but also algae, moss, lichen. A high level of humidity does not affect the effectiveness at all, so it can be used in any conditions. It is noteworthy that this preparation is available in the form of concentrate, and must be diluted with water before use.

Basic means of destruction

Means against the fungus on the walls are quite diverse, and at first you can even get a little "lost" in such an assortment. The only thing to remember when choosing - you can only trust the popular manufacturer, because it means that it produces high-quality products.

Means "Izohan Grzybostop" can fight not only with the fungus, but also with mold. Most often it is used on such surfaces as all kinds of solutions or concrete. In general, for the processing of building materials.

But already the agent "Spectrum Fungicide" can boast of its successes in the field of destruction of the fungus from the walls, with plaster, wood and also varnish-and-paint products. With ease it can be used outside the building in conditions of high humidity. That does not stop you from using it inside.

Fungus on the walls - how to get rid? In this you will also ideally be able to help the agent "Titan Fungicide". If your walls are painted, and you do not want to remove the top layer, then it is specially created for you. It effectively removes fungus and mold not only inside the building itself, but also on its facade.

What can I do to prevent the fungus from appearing again?

Have you noticed the fungus on the wall - what is it dangerous for you? The fact is that the spores that contribute to its spread, getting into the person's airways, lead to serious illnesses or even death. There are cases where animals that are more prone to the aggressive effects of the external environment die from such a neighborhood.

That's why, after getting rid of the fungus once, you should take care that he never again appeared. First, install a normal drying system or else ventilate and dry all rooms. Especially the bathroom and the kitchen.

After taking a bath or shower, make sure that all the towels and curtains are spread out so that they can very quickly dry.

Constantly monitor the condition of the pipes, because if they flow, or they will collect condensate, then all your works earlier to remove mold and fungus will soon go to ashes.

After reading this article, you now know all the answers to the question: "Fungus on the wall - how to withdraw?" It remains only to take advantage of the advice received and take up the prevention of such a disease of your walls or proceed directly to treatment.