Signaling "Sherkhan Magikar 5" - user manual, setup and reviews

Excellent signal performance "Sherhan Magikar 5" has excellent operational characteristics and high reliability. The instruction manual gives a detailed explanation, which tells about the principles of application of this device and its main functions.

Purpose

The instruction "Sherkhan Magikar 5" indicates that this alarm can be controlled by the user remotely, which is helped by an exclusive keychain communicator. The display is made of liquid crystal material, so it is considered particularly reliable.

Specially built-in system regulates a single mechanism of interaction between the processor unit and the keyfob communicator. You can control the alarm from a distance of 1500 m.

The engine starts after a special command is given. It is usually sent by the key fob, the outside of the device, the internal timer. At the same time, the temperature inside the car is not taken into account, nor is the battery voltage level important.

Benefits

Car alarm "Sherkhan Magikar 5" is designed for cars that work on both gasoline and diesel fuel. The only limitation concerns the voltage of the on-board network, which should be equal to 12 V. The transmission can also be any - mechanical or advanced automatic.

Users note that the signal system "Sherhan Magikar 5" has many advantages and functional features. This makes the device very popular among car owners. The protection of the processor unit, call sensors and antenna is performed at the highest level in Sherkhan Magikar 5. Reviews tell us that all these functions are made according to the optimal IP-40 standard. These units are located directly in the car, and their installation does not take a significant amount of time.

In addition, car owners note the presence of an excellent siren, the power and timeliness of the signal which is beyond doubt. It is created in accordance with the official quality standard IP-65. For active operation, the siren is pre-installed in the engine compartment. It should not be placed next to various high-voltage systems or the exhaust manifold.

Preparing the key fob for work

Before using the key fob, several manipulations must be carried out, since there is no battery during transportation. It is located separately, but not in the proper compartment. This is necessary to save the charge in full. When the battery is pulled out, the power is not consumed, so there is no need to recharge the device.

To put the battery in the right place, you should carefully remove the latch, which keeps the cover of the battery compartment "Sherhan Maghikar 5" in its original position. Malfunctions at the same time are excluded, since all elements of the construction are made with the maximum quality. This applies to cutting parts as well as the material from which they are created.

After performing this action, it is necessary to push the lid itself to the side that runs opposite the protruding antenna. The battery for power should be carefully installed in the compartment. As for any battery, there is a polarity, so the position of its sides can only be determined after you have read the graphic drawing near this compartment.

If any pointers are missing, then the "Sherkhan Magikar 5" signaling is placed with a minus sign to the side where the antenna is located. After the correct installation, a characteristic melody is heard, which indicates the completion of the necessary actions for the proper operation of the system. You just need to close the battery compartment cover, and then install the appropriate clip on it.

Arming

To activate the armed mode, it is necessary to switch off the ignition beforehand, and also close all the compartments of the car to ensure the free work of "Sherkhan Magikar 5". The operating manual determines that further only one touch is pressed the button at number 1 on the key fob. Long hold it is not necessary, enough point and moderate in strength touch. The system will automatically transfer all the necessary elements of the machine to the guard mode. Active locks on the doors are blocked, the starter will not work until the owner himself removes this mode.

When the car alarm "Sherhan Magikar 5" is armed successfully, a person can trace some signals:

1. The siren will sound once in a moderate whistle.
2. An emergency light signal will also be felt once.
3. A LED indicator will be connected, which will show that the car is protected by a steady flashing at a frequency of 1 time per second.
4. Headlights synchronously five times blink. Further the image of the closed lock remains to burn before an unlocking of the car, and headlights will go out.
5. The key fob will give only one short-time signal.

Enabling sensors

When the LED starts blinking, it means activating systemic control over the state of all possible inputs and methods of penetration into the car, which Sherkhan Magikar 5 can not tolerate. The operating manual says that even the sensors for calling the owner and controlling the ignition are additionally checked and constantly monitored, which allows the owner to calmly do any of his business at this time.

If an additional function is connected, which is responsible for regulating the delay of the salon light, there will also be control of the triggers, which usually start to be protected not immediately, but only after a certain amount of time has elapsed. The impact sensor activates the operation 30 seconds after the machine has been armed.

A warning

The instruction "Sherkhan Magikar 5" warns users against inattention to the car. Do not leave doors, hood and luggage compartment open. If this happens, the person suddenly, instead of the usual behavior of the machine when arming, hears a three-fold signal from the key fob along with the siren. In this case, the alarm also flashes at once three times.

On the display, you can see an image of the item that the car owner forgot to close. This happens only for five seconds, so the user may not be able to see the required item. At the same time, FALL appears on the display. This is a direct indication that you should find an unclosed element and cover it tightly.

"Sherkhan Magikar 5" instruction manual defines as a device of the highest class, since it puts on guard all communications of the car, but bypasses the activated sensor. It will automatically be additionally protected after the owner closes it. The hood zone does not affect the common panel, as it refers to the trunk area.

Automatic transition to security mode

Passive setting is a separate function that can be activated or deactivated from Sherhan Magikar 5. The autorun instruction provides - you just need to change the state of the selected function. If the owner decided to activate this mode, then immediately after the closing of the last door, the timer is activated and the guard turns on after 30 seconds.

When the countdown is started, the system constantly sends a warning that this mode will turn on. This happens every 10 seconds. If, at the specified time, any door is opened, the system activates the guard mode at a count of 30 seconds after the last door is closed. To see if this function works, you can use the word PASSIVE, which is always displayed in the display.

Alarm Mode

When the Sherkhan Magikar 5 is running, malfunctions are unacceptable. When you open any door, the system will automatically be in alarm mode for exactly 30 seconds. When this time is over, it will return to the standard state again.

If the cause of the alarm is not eliminated by this time, the alarm will sound every 30 seconds and last for half a minute. This cycle is repeated eight times. If the cause of violation of the usual mode is not canceled, the system returns to the guard mode, but if the active sensor is bypassed.

Features of work

If the impact sensor is triggered, that is, there is a strong impact on any part of the car, the Sherkhan Magikar 5 alarm will be in the alarm mode for 5 seconds, during which a strong siren and alarm signal sounds .

At low impact, that is, activation of the warning zone, also controlled by the impact sensor, 4 short beeps will sound, which are generated by the car alarm "Sherhan Magikar 5". Faults in this process are not met, so the owner of the device can be confident in their own technique.

Many users appreciate the convenience of management "Sherhan Magikar 5". How to disable the armed mode? A short one-time push of the key fob button number 2. If you correctly program all the functions of the device, the alarm will become a reliable assistant in ensuring the safety of the car.