Electric heaters of the new generation are economical: review of the best models and reviews

The growth of tariffs for electricity forces the consumer to turn to the most rational means of communication support. Traditionally, one of the most costly expense items is heating. Of course, specific indicators may vary depending on the system used. So, gas equipment is considered the most economical, and electrical equipment in almost all executions requires serious investments for maintenance. This is understood and the manufacturers of heating units, which try to minimize financial damage during the operation of such devices. Significant progress in this direction is demonstrated by electric heaters of the new generation. Economical designs, coupled with optimized heat distribution channels , give every reason to expect a reduction in energy consumption costs.

How is the efficiency of heaters assessed?

In the approaches to testing heaters on the indicators of profitability there is one nuance. The fact is that the power used is directly related to the heat transfer coefficient. This means that the power consumption determines the efficiency of the device. Despite this, the peak power indicators, compared with the actual consumption results, give an idea of how specific a model is energy-efficient. For example, a ceramic wall heater, thanks to its design, provides the most efficient heating, but can consume electricity in large volumes in comparison with simple oil units. It is quite possible and the reverse situation - and in this case, unconditionally win models in the modern design performance. It is also worth noting that the energy consumption indicators in the claimed documentation are very attractive for most manufacturers. The only problem is that in practice, official data are not always confirmed.

Model from Electrolux

Modification of EOH / M-6209 is a good example of an economical oil heater, although it is not spared from the shortcomings of many devices of this type. This is a massive almost 9 kilogram unit, which is characterized by a long warm-up, but also high energy efficiency. In the period of finding the optimum working condition, the electric heater's power is 0.8 kW. Thus, the beginning of the entry into the functional state of this model is the most problematic because of the slow access to sufficient temperatures and high energy consumption.

However, after about 15 minutes, the unit corrects the impression of itself, showing the optimum ratio of power and heat radiation. It is important to note one more pleasant nuance. The fact is that the radiator housing of this unit is heated less, which reduces the risk of getting a burn. Such safety measures, unfortunately, are far from all the electric heaters of the new generation. Economical models are more likely to focus on heating efficiency, which implies a maximum energy shift to external surfaces. But in the case of the development of Electrolux, we can talk about the balance of heat distribution.

Model from Scarlett SC-2165

Scarlett also has a number of technological developments, one of which is the SC-2165 version. This model is included in the segment in which electric convectors with a new generation thermoregulator are presented. The user has the option to set the temperature mode via the electronic panel. As for the direct heating function, then, as with the Electrolux modification, the device enters the active mode rather slowly. For half an hour the unit adds only 10 degrees, so in terms of speed it's not the best option.

On the other hand, after warming up, the unit also reduces the energy consumption level - in this case, the optimum power is 0.9 kW. Such indicators have few energy-saving heaters, so the result is quite competitive. Especially if we take into account the effective system of distribution of thermal radiation.

Model Supra

The heater in the ORS-09-MN version features a balanced rate of warm-up and economy. As practice shows, the time to enter the peak operating mode is related to the power consumption. It can not be said that this apparatus shows the best results of optimizing consumption, but excluding long-term heating is a significant advantage, which is rarely possessed by electric heaters of a new generation. Economical installations are focused on attracting a thrifty customer, who is ready to accept the inconveniences in operation. In turn, the version from Supra allows you to count on a balanced energy consumption, and on the convenience in using equipment. In the period of full working condition, the unit spends about 1.4 kW per hour. This is a relatively good result in terms of economy, but not the best.

Model from Polaris

This is a budget solution of the PRE L 0715 series, representing a small but functional and easy-to-use heater. The model has a folding design, which also enhances its ergonomics. It should be noted that the absence of complex mechanisms in the design is one of the most common rules for designing electric heaters of a new generation. Economic models, as a rule, are performed in a traditional form factor, which also contributes to energy saving. However, the Polaris developers went the other way and released an unusual product in the design plan, which affected the weak warm-up function - only 7 degrees for half an hour. On the other hand, self-heating outputs the heater to a consumption of 0.9 kWh per hour, which corresponds to the energy efficiency of the Scarlett offer.

Reviews of oil heaters

Classical oil units are traditionally associated with high energy costs for large heat losses. According to users, this is not the best option in terms of security. For example, there have been cases when such a technique literally exploded, oil-laden all the atmosphere in the house. But this is hardly an isolated case - at least, modern products have a higher level of security. The quality of energy efficiency is also increasing. Like electric convectors with a thermostat, oil heaters are increasingly equipped with digital control systems. As a result, users note the accuracy of temperature regulation through the thermostat.

Feedback on convector heaters

Convector models are a kind of a transition link between obsolete oil devices and more technological infrared heaters. Reviews of such models in terms of economy are rather restrained, since the strength of convection is still the intensity of warming up. At the same time, an effective electric heater from the company Scarlett confirms that for such models rational consumption of energy resources is available.

Feedback on infrared electric heaters

The peculiarity of models of this type is the thermal effect on objects, which, in turn, heat and air. Users of such devices note that they are easy to operate, they have attractive design, and also low noise. For example, a ceramic wall heater of this type may well be regarded as an element of the interior, but with the addition in the form of a useful function. In terms of energy efficiency, this is also a good option. During operation, users can feel heating even at the lowest power level. Again, the principle of targeted heat transfer to objects gives its advantages.

How much do energy-saving heaters cost?

The price range is very diverse and at the same time strictly segmented. The most affordable oil models can be purchased for 2-3 thousand rubles. If it is a question of equipping with digital control, the sum can increase up to 5 thousand. Convector models occupy the middle segment. This is a functional and productive electric heaters of a new generation, the price of which can reach 7-8 thousand. The most expensive units belong to the category of infrared heaters - the average version can be purchased for 10-12 thousand. But the cost is not increased by the principle of energy storage, That in such devices the latest technologies are being actively implemented. For example, the same controls and elements of digital control.

What else to consider in choosing?

Energy efficiency is only one of the criteria for assessing a heater. It is desirable to take into account several operational parameters that will help to make a more complete picture of the model. For example, the design, mass, type of control and principle of operation - these factors not only determine the convenience of maintenance and operation, but also impose their imprint on economic performance. For example, ceiling heaters with infrared radiation can be considered as an example of the most successful configuration of heat distribution. Such an assembly does not need to be set to peak operating power to get a comfortable temperature regime - accordingly, energy consumption will be saved.

Conclusion

Focus on the high level of energy efficiency of household appliances has recently become not just fashionable, but also profitable. But it is important to understand that the most economical electric heater on a set of performance indicators will provide benefits only under certain conditions of use. For example, in this case, the most impressive saving result was shown by the modification EOH / M-6209 from Electrolux. This heater is really effective in terms of optimizing energy costs, but only if it is used for a long time. If short-term heating is expected for 1-2 hours per day, then this option will be less productive than models that realize a quick output at peak power.