Electric boiler: types, characteristics. Boiler electric submersible

The electric boiler is a convenient means for obtaining hot water. The only condition for its operation is the possibility of connecting to the network. To have an electric boiler in the house is convenient in case of unforeseen situations, when it is impossible to heat water on the gas stove. Among other things, compact portable devices make life easier on the trip. Let's find out which water heater is better to choose for operation under certain conditions.

Appointment

Boiler electric submersible is used in cases where it is necessary to quickly heat water in the absence of access to the gas stove, electric kettle.

To a special group of boilers are devices in the form of a mug. Such adaptations differ mobility and serve for fast heating of water in the car salon, in office premises.

There are also devices that are used by public catering establishments. The bulk of these devices is a container, which provides the preparation of hot water for cooking food. Install them on the distribution lines, kitchens, bar counters.

Next, consider these types of boilers and the features of their use in more detail.

Submersible boiler

The immersion heater is one of the simplest devices. The basis of such devices is a metal spiral, which is placed in water and causes it to boil when the material is heated under the influence of electricity.

The main characteristic here is power. If it is necessary to prepare a significant mass of liquid, an electric submersible boiler is required for a large volume of water.

Devices of the type shown are used in domestic conditions. Catering establishments resort to the use of such devices very rarely, because of the lack of convenience in their operation.

Mug-kettle

Devices of this type are manufactured in several versions. Most devices have the form of a metal cup, from which a pin with a connector for connection to a car cigarette lighter comes off. Such a mug-kettle is able to heat the liquid quickly enough, however, it has its drawbacks. The capacitance of the containers here is extremely small. In addition, during the heating process, the device needs support by hand.

Another thing - cups, boilers with a lateral clamp. Such devices are securely fixed between the glass and the seal of the car door or installed on special stands. Devices of this kind are characterized by increased capacity, and also contain a wire that is supplied to the cigarette lighter and does not interfere with the driver to drive the vehicle. Naturally, an alternative to such a device can serve as an electric immersion heater for a large volume of water. However, to connect it in the car requires a special adapter. Yes, and using a spiral device does not look like a very convenient solution while driving.

Today, there are mug-boilers on the market, the volume of which reaches 500 ml or more. This capacity allows you to count not only on the preparation of a cup of hot beverage, but also on the heating of soups, the brewing of instant vermicelli.

Some models of cups-boilers have double heat-saving walls. The implementation of the same principle of action as used in thermoses, makes it possible to keep water hot for a long time.

If we talk about the drawbacks of cups-boilers, here, first of all, it is worth noting a sufficiently long heating of the liquid to a boil. Connecting the device to the cigarette lighter causes the battery to discharge. Among other things, during the heating of water, there may be overheating of the car wiring, interior elements, up to the fuse blocks.

Flowing electric kettle

Flow-through devices are quite capacious industrial units. Their main advantage is the possibility of uninterrupted heating of large volumes of water. To obtain this possibility, it is sufficient to connect a flow water heater for water to a centralized water supply system. After turning on the appliance, hot water will be prepared every time the crane is turned on.

The electric water heater of the flow type looks ideal for operation in places where an impressive mass of people are concentrated. At the same time, the devices of this plan can not be called economical, because they constantly consume electricity.

Mounted flow-through boilers to the wall in places with direct access to water. When they are turned on, the water fills a special tank, after which it is heated to a predetermined temperature. Then the device switches off automatically . The presence of a built-in mixer in the flow-through boiler design allows the possibility of draining excess boiling water or diluting it with cold water.

Water heater

Pouring devices, as well as devices of the previous type, belong to the category of industrial equipment, which is used primarily by public catering establishments. However, to ensure their performance, there is no need for an uninterrupted connection to electricity. It is enough to fill the tank with water and heat it up to a certain temperature. Further, the boiler is acting as a kind of thermos, into which the liquid is added as the tank is emptied.

Such devices are most often included in distribution lines in cafes, bars and restaurants. The capacity of the tank, depending on the model, can be from 5 to 30 liters. The liquid boilers are equipped with a mixer, through which consumers pour water over the glasses.

Helpful Tips

Choosing a household appliance or an electric electric water heater, the main attention should be concentrated on the material of the heating element execution. It is desirable that it be made of stainless steel. This material is resistant to the development of corrosion processes. Therefore, a heater with such a heater will last a long time.

Buying a boiler is small for heating water in a mug, it is worth giving preference to models that contain at least three turns of a spiral. In this case, the liquid will boil much faster.

In the case of buying a submersible boiler, you should pay attention to the presence of marks on the spiral, which prompts to what level it is possible to immerse the device in water.

If industrial equipment is selected for operation in a catering establishment, the focus should be on the capacity, capacity of the water tank. It is important to dwell on models with a margin of performance. This is required not only to meet the needs of numerous customers, but also to ensure that the device does not function at maximum loads.

Advantages of using a boiler for heating water

The operation of the boilers offers the following advantages:

1. Devices for this purpose can quickly prepare boiling water, provided industrial models are used - in large volumes.
2. Most devices are equipped with an automatic shutdown system, which contributes to safe operation.
3. A variety of models makes it possible to choose a device that will be convenient to use depending on various operating conditions.
4. Industrial designs of boilers are attractive design. Therefore, they can be placed even in the public eye of public institutions. Aesthetic appearance does not introduce dissonance in interior design, and compact dimensions do not cause a lack of free space in the workplace.

Finally

Apparently, there are a lot of separate types of electric reboilers. When choosing a particular option, it is important to pay attention to the conditions of future operation. An important criterion is also the performance of the device.