Does not include "MacBook" (MacBook): possible reasons and solutions to the problem

It is unlikely that anyone will argue with the fact that the technology from Apple is quality and reliable. It is worth noting that most modern and recently released laptops from other manufacturers are much inferior to the 2008 MacBooks. All available models in the line work without failures, freezes, but this does not guarantee the uninterrupted operation of the device. Sometimes there are unforeseen situations. This article is devoted to this. Consider the reasons why the "MacBook" may not be included, and how to eliminate them.

How to understand that the "MacBook" does not turn on?

In order to understand that the technology does not turn on, you do not need to have skill and some special knowledge. It's enough to pay attention to what's on the screen when loading. If the icon appears in the form of a gray folder, on which is an exclamation mark, then there is a problem with the laptop. Do not panic immediately. If there was no system failure, then the laptop technology can protect all the data that is available on the hard disk.

How do I reset my settings?

If there is a slight hang, and there is no desire to long tinker with the recovery, then you can use the fast-rollback function of EFI memory. All data after this will not be deleted and will remain on the hard disk. What needs to be done for this? First, turn off the laptop while holding down the Command-PR-Option buttons, and press the power key. Press on them until the boot screen appears. This will quickly get rid of hangs, memory will be cleared, and the work of "MacBook" will be completely restored. For the future, in order to avoid such troubles, it is better to make a backup copy of the computer and place it on any cloud storage. Then, with an unexpected failure, it is easy to recover all data.

If, after such manipulation, the laptop still does not start, then it is necessary to check the status of the hard disk, and also what kind of fastening to the loop to the motherboard.

Possible reasons

In order to save all your data when the operating system fails, you must perform all the actions carefully, carefully and in turn. Then you can achieve the desired result.

Before choosing how to solve the problem, it is necessary to determine why the hibernation occurred. The question of why MacBook is not included will bother every owner who finds himself in such a situation. What caused the shutdown of the provisioning: a system failure, a memory error, a processor, or some other problem? In addition, the failure could arise and as a result of unstable operation of the operating system. Often such a reaction on the laptop occurs on the upgrade process. Sometimes this happens when you connect an incompatible device to the MacBook. This problem can be solved with ease - it is enough to disconnect all additional equipment.

In order to establish the cause, you also need to look at the battery status. If it is discharged or stopped working, and the system was updated, then 99% of the failure occurred due to the interruption of the process. Let's consider in detail the ways of solving the problem.

We fix the problem: the first method

First of all, it's worth using a safe way to turn on your laptop - Safe Boot. What is it for? When working with it, "MacBook" downloads only the software that is checked and installed from certified sources. To turn on the laptop in this mode, you need to press the Shift button and then carry out the usual manipulations. Unfortunately, the boot process can be long, but it's not worth hurrying or cutting it off, because all the data should remain unscathed.

If the user needs to make a detailed download in order to understand why the failure occurred, then you should start turning on the laptop in the usual way, by pressing Command, Shift and V in addition. Then the MacBook will boot in safe mode with the ability to see all the details of the launch. In other words, Verbose Mode is additionally activated. What does this mean? This download method allows you to find out all the information about the utilities and drivers files, as well as see all the errors that have occurred as a result of their work.

In the event that after this startup the laptop is functioning normally, then it can be downloaded as standard. But sometimes this method does not help to solve the existing problem, then you need to proceed to the second option for troubleshooting. If after this "MacBook Pro" does not turn on, what to do can be understood further.

We fix the problem: the second method

Of course, the laptop can hang and not turn on for many reasons. If you assume that the problem is in the hard disk, then you can use the Disk Utility program to check its status.

First you need to turn off the laptop. If the display shows a gray / blue / other color screen and you can not do this, you will have to turn off the power forcibly. To do this, hold down the start button for 7 seconds.

Now you can open the recovery mode. It is from this that you need to run the "Disk Utility". How to do it? It is necessary to hold down the "MacBook" power button, and also Command and R simultaneously. After that, the user will see a screen with utility icons installed in the operating system. You need to find the Disk Utility program and run it. Now you need to find the name of your hard disk on the screen and enable it. After you finish, you need to fix all problems and restart your laptop. However, if the "MacBook" is turned on and off, and the above methods did not help, then we proceed to the next step.

We fix the problem: the third method

If the user has made a backup copy of the documents, but can not get to it because of a failure in the "MacBook", then the third way will suit him. You need to enter the external disk mode, which is called the Target Disk Mode.

How to launch it? We need a second MacBook. It is needed in order to connect them with one cable. Now you can turn on your own laptop. If there are any problems, then you can hold down the power button for a few seconds until the logo appears. Now instantly you need to press the T key. Keep it in this state until the screen appears as a Thunderbolt. External disk mode is started. At the moment, the laptop is actually it, and not a familiar computer. If the download is successful, a new hard disk will appear. Due to this, you can easily transfer the necessary data to this medium. Now you are allowed to restore the laptop. Even if the information is removed from the main disk, it will remain on the new additional one.

We fix the problem: the fourth method

If none of the above methods was able to fix the problem and its results, and the MacBook screen does not turn on, then the last option is to reinstall the operating system. In order to do everything correctly and not get a result of the failure, you need to enable the recovery mode of the laptop. How to do this, mentioned above in the article: you should click on the "MacBook" start button, holding down the R and Command keys.

After that, the operating system will turn on. You need to find the Reinstall menu. A dialog box appears. It is necessary to follow all the instructions that are described in it. Now the question of what to do, if the "MacBook" does not turn on, should decide itself.