Arts & EntertainmentMusic

Details on how to set up the ukulele

If you want to play jazz, reggae and folk, then you can not do without a special guitar - ukulele. It's easy enough to master if you have basic playing skills on a regular six-string guitar. Many newcomers are frightened by the question of how to adjust the ukulele. To do this, you can use a hearing aid or a digital tuner. Now there is even the possibility of setting up online, through a regular microphone.

Varieties

Before setting up the ukulele guitar , you need to decide what variety it belongs to. After all, the system can have differences from this.

1. The most common type is the soprano. Its length is 53 centimeters, and the system is set up according to the GCEA scheme.

2. The concert ukulele length is 58 centimeters, and the system is used the same as for the soprano.

3. One of the large varieties of ukulele is a tenor, the length of the instrument is 55 centimeters, and it is tuned according to the DGBE scheme.

4. Baritone is the largest ukulele - its length is 76 centimeters, and the scheme of building DGBE.

Now the musicians can meet unusual ukulele with eight strings. In this case, they are divided into pairs, each of which is configured in unison. Its sound will be more voluminous. So, before you adjust the ukulele, measure it. The resulting value will depend on the system.

Several options for building ukulele

Most often the musicians can meet ukulele soprano, which are tuned according to the notes: salt-do-mi-la. Three strings (before, mi, la) are tuned to the usual six-stringed guitars - from low to high sound, but with the fourth, there are often problems. The salt should belong to the same octave as the other sounds, so the string gives a higher sound than the second and third.

If you are looking for how to set up a ukulele baritone or tenor, then you need to remember the rule that one of the strings of this small ukulele is always above the others. In the case of a tenor, the tuning notes are as follows: re-sol-Si-mi. In this case, the note "re" from the same octave as the other sounds is taken for tuning.

Ways to configure

If you are able to tune a normal guitar by ear and know the location of notes on the fretboard, then problems with adjusting the tension of the ukulele strings will not arise. In this case, you can use the method of fretting.

If you have minimal skills to communicate with stringed instruments, it is better to use a digital tuner or special software for the computer, replacing it. In this case, you will need a microphone, which is set in forty centimeters from the strings. Take turns pulling the strings and follow the tuner's prompts.

If you have a musical ear and there is a synthesizer or a piano at home, then you will need the following answer to the question about how to set up the ukulule. In turn, press the piano keys and, in accordance with the resulting sound, adjust the strings of the ukule. You need to achieve a harmonious and identical sound. Now you know how to set up the ukulele.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.