Crazy Handles, or How to Make a Microsim

It's time to buy a new phone. It would be more accurate to say, smartphone. Phones are already quietly outliving their. This is due to the fact that the functional that the phone carries is too small. But a smartphone, which in English means "smart phone", will help you in almost any situation. Manufacturers, to extend the life of the device for several hours per charge, insert a larger battery into it. Because of this it turns out that the usual SIM card is not fit there. Therefore, we started using microsymes. So that you do not panic, I'll teach you how to make a microsim.

You can make a microsymme in two ways. The first, perhaps, the most simple. You just need to find the documents and go with the old sim card to the operator's communication salon, which serves you, and there you will be replaced without any problems. It will not take very long. Most companies will do it for free.

The second way is a bit harder and more dangerous. You will have to make microsim from the sim card that you used before. In fact, it will take you about 5 minutes. To perform these actions, you will only need scissors, a pencil and a ruler. And yes, I almost forgot, a little patience. Standard SIM card size: 2h15h0.76 mm. But the newly mikrosim has slightly smaller parameters: 15x1x0.76 mm. We are all lucky that the width has not changed.

Now around the metal chip you need to draw a rectangle 15x12 mm. Draw so that you can see later when you start cutting. Once everything is ready, proceed to the operation. Carefully start cutting. Use the scissors larger. Manicure does not fit, because the plastic is pretty thick and durable. How to make a microsim neater? Can a little nail file for nails. But in any case, do not use the file. In this case, the most important thing is that the edges are flat, and the internal chip is not damaged.

Congratulations! Now your microsyme is ready. You can safely insert it into your smartphone. But be careful. Some tablets do not accept calls, they are intended only for access to the Internet, so do not put the old SIM card into a new standard card. It is better to go to the salon and get a sim card with a special rate.

As a rule, only one company uses such cards. But most recently they switched to nanosim. And this is even smaller than microsim. But I strongly recommend that you go to the communication salon and change the SIM card there, because it's much easier. Also here you can ask how to make a microsim yourself. But in most cases you will be told to change it. As mentioned above, microsymes are not used by all manufacturers. If you used a smartphone in which there was a microsim, and now bought one where it's ordinary, you should not stick it all back. You can change it in the communication salon. As well as conscientious manufacturers in a box with a smartphone they put some adapter. You put in there microsymbling and you get the usual Simka. Everything is very simple and fast. Of course, you can buy this miracle in any relevant store.

Now you know how to make a microsim from a regular sim card, and made sure that nothing complicated in this. The most important thing is patience. Good luck!