Compressor for blowing pipes in the country: overview, specifications and reviews

Every owner of a house or country plot has a desire to enjoy the benefits of civilization, to which one can include water. However, in order for this idea to have a right to exist, it is necessary to use communication systems. After installing the pipes there will be a need to blow them. To do this, use a device called a compressor.

However, there is another way, which allows to drain water before the beginning of the winter season. It is expressed in the laying of pipes under the slope and installation of a crane, through which water from the system will merge.

The main advantages and disadvantages of the plants

Quite often, modern consumers are wondering about the advantages and disadvantages of the compressor for blowing pipes at the dacha. Among the first it is necessary to allocate:

• High power;
• Low noise level;
• Low cost;
• Convenience in operation.

The first feature is due to the coaxial drive, which indicates an impressive speed of operation. In addition, similar devices operate at a low noise level, because they are equipped with special housings. Disadvantages of such devices is almost none, as one of them is the possibility of leakage.

The main types of compressors, their advantages and disadvantages

If you need a compressor to blow the pipes in the country, then you should familiarize yourself with the most common varieties of such devices. The most popular are piston units, the principle of which is that the air pressure is provided by a piston cylinder. The main advantages of such devices are their low cost and ease of use. In addition, they are repairable. Among the shortcomings, it is necessary to highlight the impressive noise level and the lack of the unit's ability to work without interruptions. From time to time, this technique should be given a rest.

A screw compressor for blowing pipes at the dacha compresses the air using screws. Such devices do not have exhaust and inlet valves. Among the advantages of such compressors is a low noise level and a slight friction in the screw block. When operating such devices spend a little power. The disadvantage of this variety can be considered a high cost, which is especially true if you compare with reciprocating compressors. Another disadvantage is the lack of independent repair.

Spiral aggregates are good in small sizes, so they can be conveniently used and transferred from place to place. Membrane variety uses a flexible membrane as a piston. The downside of such devices is the impossibility of creating high pressure. In addition, the performance of such devices is quite low.

Overview of some models of compressors: "Caliber KMK-2300 / 50U"

This model has a cost equal to 12,400 rubles. This equipment, the design of which includes a pressure switch. It is responsible for shutting down the engine if the pressure in the receiver reaches a critical level of 8 bar. If this value drops to 6 bar, the device will automatically start the engine. Continuous and stable operation is ensured by an asynchronous motor. Draining of condensate is made through the tap, located in the bottom of the receiver.

Reviews about the model

The above-described compressor for blowing pipes in the country, according to users, has many positive features:

• Convenient transportation;
• The possibility of visual control;
• Resistance to vibration.

As for transportation, it is provided with a handle, located on the upper part of the case. Visual inspection became possible thanks to a manometer, with which you can monitor the level of pressure in the system. One can not help but note the resistance to vibration. This feature, according to users, is provided by the presence of legs, they effectively quench the vibration. The consumers consider additional advantages:

• Long service life;
• Anticorrosion coating;
• High-quality execution;
• A capacious receiver.

Technical characteristics of the model

The compressor described above for blowing pipes at the cottage has quite outstanding technical characteristics, among them high productivity, which reaches 440 liters per minute. It is also important to mention the power, it is 2.3 kW. The volume of the receiver is 50 liters.

The design uses oil lubrication. Weigh equipment is only 34 kg. The number of revolutions per minute reaches 2850. The frequency is 50 Hz. The operating pressure is equivalent to 8 bar. The equipment is operated by an electric motor.

Overview of the features of the automobile compressor of SPECA KPA-35 brand

This equipment costs only 1500 rubles. It has a small weight and dimensions, which allows you to transport it in the trunk of the car. The design provides for the presence of a pressure gauge, which allows you to monitor the pressure level.

If you blow pipes at the cottage by car compressor, then you can consider this model, which has quite a high performance. It reaches a mark of 35 liters per minute. The case is made of metal, therefore it is not subjected to deformation and ensures the stability of the device during operation.

Reviews about the operational features

When consumers consider the above-described model of an automotive compressor, they note:

• Convenient transportation;
• The possibility of visual control;
• Great opportunities.

With regard to the first feature, it is provided by the presence of a transport handle, with which the device can be transferred from one place to another. With regard to visual inspection, it is provided with a pressure gauge, with its help it will be possible to monitor the change in the pressure level.

Consumers quite often, from their words, prefer this particular model, as it provides great opportunities, expressed in the presence of a set of attachments, which the consumer can use for its intended purpose. This mobile compressor for blowing pipes also has additional advantages, namely:

• High performance;
• The presence of a bag for storage;
• Simplicity in work;
• Sustainable accommodation;
• Convenient handle.

Technical characteristics of the model

This piston autocompressor has a capacity of 35 liters per minute. The design uses an analog manometer. Autonomous operation of the device is not provided. The system does not have a flashlight, the weight of the device is only 1.85 kg. The dimensions of the device are 155x75x140 mm.

Overview of the features of the compressor brand PATRIOT EURO 50/260

This compressor for blowing pipes in the country, whose price is 7800 rubles., Is a device with a motor, protected by a casing. It prevents corrosion and damage. The receiver is placed horizontally, it is painted with a protective layer, which excludes its spoilage. The body has a handle that facilitates transport.

Reviews about the model

If you still do not know which compressor model to choose, you can prefer the one that was described above. According to consumers, it has many positive features, among which buyers especially distinguish:

• Protection against damage;
• Ease of movement;
• Stability on the surface.

The last factor is provided by legs, which are equipped with rubber cushions, which suppress vibration. In addition, it also extends the life of the unit. Such a compressor for blowing pipes in the country is inexpensive and, in the opinion of customers, it has a lot of additional advantages, among them it should be noted: low weight, high-quality performance, high productivity, no need for additional service.

Pipe blowing without compressor

The purging of a suburban water pipe without a compressor can be carried out in many ways. This topic is relevant for many homeowners who do not live in the winter at the dacha. If the water pipe was equipped with polypropylene pipes, which penetrated into the ground by 0,7 m, then there is a possibility of their freezing.

As an example, we can consider pipes with a diameter of 20 mm. They are laid from the well to the bath. On the second floor there is a storage capacity, the volume of which is 0.5 m ³ . Next, the wiring is in the bath and goes to the house, while it also goes deep into the ground.

Due to the fact that the pipes are at the depth of the freezing line, there is a high probability of their rupture from frost. That is why before the beginning of the winter season, it is necessary to carry out a purge. Use for this you can vacuum the old model, which has two holes, one should provide suction, the other - blowing. However, this method has two drawbacks. One of them is expressed in low pressure, the other is the impossibility of sealing the hose and pipe tightly.

Conclusion

If you use pipes for water in the country, the features of the compressors must be studied, since such equipment will be needed for purging. On sale today you can find a huge number of compressors, they are petrol, screw, piston and automobile. The most mobile are the latter, they are the cheapest, have the most compact sizes and are widely available.

Among other it is possible to meet the model Inforce PROFline, the cost of which is equal to 8800 rubles. It is a model running from a motor with a copper winding. The volume of the receiver is precisely verified, the system is protected against overload, and the design is as long as possible. Among the additional features, it is necessary to provide a quick check of the oil level and reduce the level of vibration during operation.