Cement plaster "Found": characteristics, types and reviews

If you at least once did the repair, you heard about the brand "Found". Among other goods it is necessary to allocate plaster, which can have a different purpose. The advantage of this product is not only high quality, but also affordable cost, which is provided by its own production facilities.

The company specializes in dry construction mixtures since 2005. Used compounds for facade and interior works, they are suitable for finishing walls, partitions and ceilings. With the help of these mixtures it is possible to give the surfaces an impeccable smoothness, while there are no restrictions in the humidity level in the room. It can be:

• Basement floors;
• Swimming pools;
• Cellars.

The main types of plastering "Found": the cement composition "FLAYVELL PC24 / 1"

If you are interested in the products of the company "Found", you can choose cement plaster. Her brand is mentioned in the subheading above. Provides a fairly low flow rate, as well as thermal insulation and soundproofing qualities. The resulting layer differs in weather resistance and vapor permeability. Manual and machine application is allowed, but a mixture for external and internal works is suitable.

Use this plaster to level the walls of cellular and ordinary concrete, as well as bricks. It is recommended that the composition for the facade, but in this case, the application should be carried out above the socle part. However, this plaster is suitable for premises, the operating conditions of which can differ by any level of humidity.

The main characteristics of cement plaster

The above described plaster "Found" has a gray color, the compressive strength can be greater than or equal to 3 MPa, the flexural strength is 1 MPa or more, while the adhesion level with the base is equivalent to 0.4 MPa, however this parameter may be higher. The maximum fraction of particles is 2.5 mm, the recommended thickness of the composition layer can vary from 10 to 30 mm. On 1 kg of a dry mix at mixing of structure it is required 0,17-0,21 l of water.

If plaster is applied in one layer, the thickness of which is 10 mm, then about 10 kg of plaster will be taken for 1 m ² . Plaster "Found" after the connection with water will be suitable for work for 3 hours. It is important to know also the coefficient of vapor permeability, which may be equal to or greater than 0.12 mg / m * h * Pa. Specialists who purchase this solution are often interested in the brand of mobility, it looks as follows: PC3.

If it is necessary to apply polymer materials like fillers and paints, this work can be done after 14 days. Frost resistance of the created layer will be 35 cycles. The subsequent plaster layers can be applied after 24 hours. Gypsum putty or tile adhesive can be applied after three days. This "Base" plaster can be applied at a substrate temperature and ambient temperature in the range from +5 to +30 ° C. The layer can be used for a wide range of temperatures, which varies from -50 to +65 ° C.

Facade plaster "Will Establish" marks "STARTVELL PC21"

This mixture has a high elasticity, low consumption, high resistance to cracking, weather resistance and suitable for walls of cellular and ordinary concrete, as well as bricks. This composition can be said to be universal, characterized by high plasticity of the finished solution and has the quality of vapor permeability.

Characteristics of "STARTWELL PC21"

This "Facet" facade render has a flexural strength of 2 MPa, as to the strength of adhesion to the base, this parameter is 0.4 MPa. For 1 kg of dry mixture will take about 0.15 liters of water. If partial alignment is carried out, the recommended layer thickness is 40 mm. When it comes to continuous alignment, this parameter can vary between 5 and 30 mm.

After mixing, the solution remains viable for two hours. Frost resistance is quite high and reaches 50 cycles. The described plaster "Found" can be operated at a temperature ranging from -50 to +65 ° C.

Reviews of plaster universal plaster "GIPSVELL PG25"

This composition of gray color is a universal plaster, which can be laid with a layer from 3 to 80 mm thick. According to buyers, the viability of the mixture is optimal, the composition has high vapor permeability, ductility and evenly hardens when applied. Users emphasize that the layer does not require shpaklevaniya, and also suitable for rooms with normal humidity.

Use this gypsum mixture can be used to level the surfaces inside the premises. If you get acquainted with the feedback of consumers, you will be able to learn that the recommended bases are gas and foam concrete surfaces, gypsum, concrete and brick walls. Here you can include walls and ceilings from:

• GKL.
• DSP.
• GWL.

Main characteristics

The above described gypsum plaster "Found" contains particles, the maximum fraction of which does not exceed 0.63 mm. The flexural strength is 1.5 MPa, while the compressive strength is 3 MPa, these parameters may be greater. The adhesion to the base is 0.3 MPa. When closed, 1 kg of dry mixture will take about 0.47 liters of water. If the thickness of the layer reaches 10 mm, then the consumption of the mixture per 1 m ² is 9 kg. The thickness of the layer should vary from 3 to 80 mm.

After mixing, the composition will remain viable for 1.5 hours.

Plaster "Found Gypsum" can be applied at ambient temperatures and bases in the range from +5 to +30 ° C. As for the temperature during operation, it should not exceed the limits of +5 - +40 ° C. The next layer can be applied at least a day.

Conclusion

Not so long ago in the market of building materials it was possible to find homemade solutions in a wide assortment. Already today the most popular are the mixtures of factory production. Consumers choose them for the reason that the composition contains mineral components and sand, as well as various modifiers. Modern cement plaster allows to level out any irregularities, and the composition can be used for manual or machine application.