Baler for motoblock: specifications and working principle

The baler press for the motoblock makes it possible to improve harvesting of crops, namely, to remove the remaining hay and straw. The device compresses the mass into bales or rolls, convenient for transportation and storage. Consider the characteristics and features of these devices, among which there are suitable modifications for large lands and private farms.

Mini baler baler for motoblock

This device belongs to the category of compact pick-ups. With its help, hay is pressed into rectangular blocks. The main advantage of the device is that the bales are easier to transport and fold. In addition, the process of feeding animals is facilitated. When compacting, it is possible to adjust the density of the bale, hence its mass and dimensions. Such an opportunity extends the scope of the device and the transportation process.

Rolling analogues

The round baler for the motoblock twists and presses the collected material with a special grating. This design allows you to control the density and looseness of the straw. Before you get a roll, it is wrapped with a rope or string.

This type of pick-up is considered the most popular. This is due to some advantages over competitors, namely:

• Compact dimensions in comparison with the baling counterparts.
• The lower price.
• The best conditions of operation and maintenance.
• The possibility to leave the core loose for better air circulation.
• Rolls are the same in size and density.

Device

Hay-baler for a motor-block belongs to a small agricultural machinery, it is a trailing device attached to a working machine. The main purpose of the device is the collection of hay, straw, stems and their subsequent pressing. As a result, fodder waste does not take up much storage space and is more transportable.

An important factor is that mini-variations have small dimensions and do not require a large storage space. At the same time, the capture width and processing speed of the areas are reduced, but there is a real possibility of aggregation with almost any motor blocks.

Roll models consist of a pressing belt, a special drum, a knitting and tension block. In addition, the conveyor and the movable roller are provided in the structure. The electrical system includes sound signals and rotary indicator lights. The power is taken through the shaft of a motor block or a tractor.

The bale system consists of a knitting device, a movement transfer unit of the mechanism, a pressing device and a receiving compartment. The power take-off is identical to the roll analogues.

How does a baler for a motoblock work?

Roll modification spring pricks selects a roller of straw or hay, which then falls into a special compartment and is twisted under the influence of the press device.

In baling analogues, the selection goes exactly the same, after which the collected mass is transported to the pressing chamber by means of a screw mechanism. The knitting machine is activated under the pressure of the hay on the walls of the compartment. The bale is wrapped with a pair of threads and thrown onto the land. Certain models have become more widespread due to design features. Let us consider their characteristics in more detail.

Domestic equipment

The baler for the Neva motor block (PPR-50) has a low cost and good functionality. It is compatible with equipment with a capacity of 10 horsepower. Owners often complain about the fact that the forming compartment is not protected by the diameter of the casing, and this contributes to the loss of some of the collected straw through the rollers. In addition, the device does not have disc stops on the sides, which affects the density of the roll forming, especially if the mass in the chamber is high.

Characteristics:

• The width of the grip is 800 mm.
• The minimum power of the equipment is 10-12 horsepower.
• Speed working - up to 6 km / h.
• Length / width / height - 2,5 / 1,6 / 1,5 m.
• Mass of the roll (maximum) - 20 kg.
• The weight of the unit is 350 kg.

Mini R-500

This Italian baler for motoblock is more perfect, heavier than the domestic counterpart in almost one and a half times. To work, you need a device with an engine of at least 11 horsepower. The weight of the rolls being formed is 55 kg, which is practical, but it is too heavy for manual loading. The device is characterized by compact dimensions, high performance and modern layout. The pressing part is a block with aluminum rollers.

Options:

• The grip width is 1300 mm.
• The size / diameter of the roll is 570/630 mm.
• Power consumption - from 11 horsepower.
• The deflection is 540 rotations per minute.
• Density of the compact is 350 kg / cc. M.
• Length / width / height - 1,8 / 1,4 / 1,2 m.
• Weight of the device is 520 kg.
• The weight of the roll (maximum) is 55 kg.

Modification RXYK 0850

Round baler for the motor block, which has a high power rating, can work even with coarse fodder (corn, sunflower). In this case, the technique has compact dimensions, produces small and lightweight rolls, which facilitates their transportation to one person.

Characteristics:

• The width of the grip is 800 mm.
• Power of the power plant - from 24 "horses".
• Roll dimensions - up to 70 cm.
• The working speed (at the maximum) is 5 km / h.
• Length / width / height - 1,15 / 1,3 / 1,2 m.
• The weight of the device is 390 kg.

Model M60 Mini

This baling mini baler for the motoblock is produced in Slovenia together with Italian designers under the SIP brand. The technology has compact dimensions, reliable design and the ability to choose different grasp widths.

Below are the technical parameters of this machine (in parentheses are the characteristics of the versions of Mini S and Super):

• The width of the grip is 1.05 (0.9 / 1.4) m.
• The length of the bale is from 40 to 130 cm.
• Power motoblock or mini-tractor - 20 horsepower.
• Length / width / height - 1.6 / 3.9 / 1.35 (1.49 / 3.95 / 1.35 and 1.9 / 3.95 / 1.35) m.
• The weight of the unit is 900 (900/1000) kg.

How to make a baler yourself?

Pick-up for hay can be built with your own hands, focusing on the capabilities of the existing motoblock. Component parts can be purchased at disassemblies and in specialized stores. It is worth noting that the higher the power of the working unit, the more efficient the waste collection will be.

The adaptation platform is assembled according to the following scheme:

1. It is necessary to form the undercarriage with the base on the pneumatic wheel pair.
2. Then the conveyor and the front part are mounted on the trailer.
3. The main pressing mechanism is preferably to be purchased from the factory assembly, where a clamping grille, rolls and a plate spring are provided.
4. Next, connect the gearbox to the cardan, which will provide a chain transfer for interaction with the rollers.

To improve the functionality of the device, it is necessary to select gears of a sufficiently large diameter. The finished device will increase the efficiency of the work done and reduce the time required.