Balancer for winter fishing for perch: making by own hands. Homemade balancers for winter fishing

Winter fishing on the balancer is becoming more popular every year. It is an active kind of fishing. The balance for winter fishing is provided mainly for the three main categories of fish - perch, pike and perch.

Description

This rig is a bait, in shape (and sometimes in color) reminiscent of a small fry. In the tail and the head of the rocker there are soldered up two single hooks. Bottom and top of the "fish" are two loops: the top is needed to attach the line, the lower one is needed for the additional tee.

Well, if the balancer for winter fishing is equipped with a red-black fly or red-yellow color. The obligatory component of this bait is the stabilizer located in its "tail" part. It is thanks to this addition that a diverse game is provided.

general information

The balance for winter fishing is not only of different sizes, but also of weight. And, as a consequence, depending on these parameters, the game of bait also changes. For example, a wide and hard plastic tail gives speed and swing, a narrower and thinner, on the contrary, reduces the amplitude of the oscillations. Perch balancers for winter fishing have a length of five (and pike and pike - up to ten) centimeters with a weight of thirty grams.

The colors of these baits are varied: from natural, similar to a natural fish, and to bright acid. What balancer for winter fishing is better, to solve the fisherman: there are no such conditions in the pond that all baits work equally well. The most catchy of them have to be chosen by trial and error. Therefore, experienced anglers prefer to have at hand several different options, including self-made balancers for winter fishing, so that during fishing you can use exactly those with which you can get a good "harvest".

Varieties

Balancers, which are found on the shelves of specialized stores, regardless of the manufacturer, have three design characteristics. This, firstly, metal models that have plastic wings in the tail part. In addition, there are varieties with a fur brush. And, finally, new balancers for winter fishing - silicone, which appeared recently. There are also combinations of wings with a wool tail, but these are rather derivative designs.

Balansir for winter fishing with your own hands

Lures that are sold in specialized stores, of course, are of high quality. They are made of expensive natural materials with high-quality accessories.
For example, hooks with tees, used in almost every model, are only branded. The balance for winter fishing, bought in the store, is perfectly tuned and starts from the first toss.

However, many do not like their game, so they prefer to independently, with their own hands to finish or even make pike or perch bait, bringing them to the desired design. According to the masters, only a balancer for winter fishing, modified by hand, has an impeccable game and makes even a sleepy prey attack.

How to make a bait

On the catchability of the balancers on the first ice, many anglers know firsthand. Blesnyshchiki successfully catch this bait not only perch, but also pike, zander and other predators. But if catching passes in the zakoryazhenyh places, then there is no loss without losses. Therefore, in the arsenal of an angler should be about a dozen cool balancer. However, their present value is somewhat frightening. And not all models have the game that you need. That's why many people prefer to have a balancer for winter fishing, made with their own hands.

To do this, you need to get a gypsum, a piece of stainless wire with a diameter of 0.5 to 0.7 millimeters, lead and a pair of hooks, which will match the size of the future bait.

Preparation method

The first thing you need is a "donor". They can become a balancer for winter fishing for perch, purchased in a store and has already managed to prove good. It will need to be disassembled by detaching the bottom hook and carefully removing the plastic tail, trying not to break it.

Balancers from well-known manufacturers who have excellent catchability and have been used more than once in water bodies, but possess one significant drawback - a high price, can be used as an experimental sample. Therefore, they need to be "multiplied". The manufacture of balancers for winter fishing should begin with the preparation of the body of the future bait. The simplest is the option made with the aid of a nadfile from a piece of lead.

Then a mold made of gypsum is made, which is bred to the consistency of thick sour cream and poured into a previously prepared container. If self-made balancers for winter fishing are supposed to be made small, then an ordinary matchbox can be used for this purpose. After pouring into the form of gypsum, the body of the future bait neatly folds there and is half-stoked. In this case, it is necessary to pre-coat the disc with solidol, so that it does not stick.

After the mold has dried on one side, the future balancer for winter fishing is removed, and the surface is leveled. Then centering grooves are made. After that the balancer is put back into shape.

The whole surface and the bait itself should be coated with a solidol and poured with gypsum so that the body is inside. Lubrication will not let the half stick.

The final stage

After waiting for the plaster to dry, you need to level the mold on the sides with a knife and disassemble the two halves. Then, with the use of small drills, a casting hole and a hole for the air outlet are made.

After that, the mold is prepared for casting. This is done as follows: slowly hanging hooks with eyelets made of wire. To begin with, the form should be thoroughly heated, for which it is necessary several times to fill lead in empty molds. After this, you need to put hooks and loops into the previously prepared grooves. Then the mold is assembled and the immediate molding of the future bait begins.

Appearance

After this, the painting phase follows. At this stage, anglers use a variety of colors, including oil. After that, the tail of the balance bar is made. According to experienced spinners, who made more than one bait themselves, the best tail is obtained from a conventional plastic bottle. From it, using a pair of scissors, an uncomplicated contour is cut out. The tail is glued with superglue, and then in the area of the hook is poured with epoxy for reliability.

Through experiments

It can not be said that on this the manufacture of balancers for winter fishing ends. It is not enough to pour out the body and install the hooks. There is one more phase - the trial process. Experienced craftsmen make several different forms of balancers with different suspension points, different shapes, tail bend angle, etc. In tests that many spend at home in a conventional bath, most of the baits produced can be rejected. But from the remaining, you can select several that will meet all the requirements.

Features of the tooling

The correct play of the balancer depends, first of all, on a competently made suspension, the point of which should be located approximately in the middle of the body and at the center of its gravity. The classical position of the bait in the air is as follows: the stabilizer should be lowered slightly downward, and the head lifted.

In the water, the properly made balancer will be positioned horizontally. If the bait immediately, still in the air, take a direction parallel to the surface of the water, then there is no need to rush to correct the error in the suspension. It is likely that the loaded balancer will get a normal position.

But if he is in the water will tend to the bottom or to the top, then his game can be unstable. In this case, it will be necessary to take measures to correct the error. The simplest version of the equipment to change the alignment is to wind the soft wire on either side of the rocker. Almost always this is enough to correct the error, and the game is resumed.

Checking

In order to find out for sure how the bait behaves in the pond, it is necessary to place it in a volumetric container with water or to conduct test test wiring directly to the fishing site. It can be an ice-free open pond, a river, etc. The balancer after making a toss with a drill must make sideways to the side of the vertical line, then returning to the starting point.

The whole trajectory, if you look at it through the transparent ice from above, will resemble the movement of the G-8. But more often bait goes uneven semicircles, and this is also normal. The main thing that you need to pay attention to is the lack of a primitive upward lift and the same discharge to the bottom. This happens most often if the balancer for winter fishing is suspended incorrectly or the lift of the spout is too sluggish and smooth.

Some nuances

These baits can be either fast or slow. It all depends on the characteristics of the material from which the tail fin is made. If the plastic or metal stabilizer is on the balance, its speed will be high. Tails made of synthetic fibers or animal wool, as a rule, give this bait a smooth game, and therefore it is considered slow.

In addition, the movement can be somewhat slowed down by various equipment (plastic droplets on a suspended tee, etc.). Especially tangible on the game balancer is influenced by different bundles of wool or thread. And if such equipment on the bait is also too large, then sailing horizontally decreases significantly. This, in turn, negatively affects the game.

The best balancers for winter fishing are those on which the triplet is suspended on a chain, and not on the winding ring. In addition to the correct game, this equipment gives the bait an additional game from the movement of the hook with a bright droplet. And this is especially noticeable if the chain is made of silver.