"Atmor" is a flowing water heater. Instruction, reviews, prices

To create comfortable living conditions, hot water supply is necessary . If you do not want to put up with the permanent or temporary lack of water, as well as interruptions with its supply, you can consider the products of the company "Atmor". The water heater will solve the above-described tasks.

Features of choice

If you prefer compactness and speed of operation, then you should prefer the flow device, giving up the storage device. If you are attracted by the devices of the above-mentioned company, then in the market of modern goods you can choose a certain model among a wide variety of options that differ in size and technical characteristics. Pay for the water heater will be from 2400 to 4800 rubles. This is 3 times cheaper compared to storage devices, but the power of these devices is similar. If you want to purchase a flow-through water heater "Atmor" (5 kW), you should first become familiar with its principle of operation.

Principle of operation

During operation, heating elements are heated, water trickles fall on them, which can heat up to the required temperature. Such devices are compact, due to this you can hold the device even in the smallest room. As practice shows, to provide hot water two points of the described version of the water heater will be enough. However, if you want to get a normal job, you should choose a model with head pressure, which is equal to the limit of 0.4 atmosphere.

Reviews about technical characteristics

On sale today you can find different goods of the company "Atmor", water heater flow is an excellent example. Depending on the operating conditions, you can purchase pressure or non-pressure equipment. As users note, electrical appliances are not only compact, but also environmentally friendly. With their help, you can get heated water in almost unlimited quantities.

Almost immediately after switching on the device begins to heat the coolant to the set temperature. To carry out installation works, as the domestic specialists say, it is necessary to have a separate shield, which is required for a circuit breaker with a specified cross-section.

If you are interested in electric boilers, then for the solution of household tasks the model with a capacity of 3-6 kilowatts is quite suitable. If, in front of the device, the task is to heat water for the bath and shower, the power should be increased to 8-11 kilowatts.

Interested in the company "Atmor"? A water heater of this company you can always buy at an affordable price. If it is a non-pressure device, then the internal pressure in it will be the same as the atmospheric pressure.

What to look for

According to users, the crane is designed to protect from impressive pressure indicators that can be created in the water pipe system. Such devices are equipped with a nozzle, which makes it possible to use the devices as a shower. Experienced consumers argue that the best such units have proven themselves in suburban homes, where people live temporarily. The power of the device can vary from 2 to 8 kilowatts, which allows the device to heat water for a summer shower.

Reviews of pressure equipment

Today, in the large assortment in the market of modern goods are presented the devices of the company "Atmor". A flow-through water heater of this supplier can always be purchased at an affordable price. If you decide to choose a pressure device, you will get the unit presented in the form of a drive. Use it will need to be based on the principle that is used in the operation of electric flow-through boilers, deprived attachments with an exit and an inlet for the jet. Consumers like these models for the reason that they can be connected to several mixers.

An excellent positive feature is that the consumer will have the opportunity to use heated water in different places of the apartment at the same time. The devices are electronically controlled, with which you can easily maintain the desired level of heating of the coolant.

As advised by users, pressure systems, whose power does not exceed 6 kilowatts, is best used for a summer shower or kitchen. If you want to take a bath, it is best to choose an aggregate with a capacity of over 8 kilowatts.

Review of some features of the Atom water heaters

If you want to buy a flow-through water heater "Atmor" you can choose a model that will be convenient to use under certain conditions. Thus, the capacity of 3.5 kilowatts will be enough to equip the shower room and solve household tasks in the kitchen. If you want to purchase the device for years to come, then you should choose models in which the heating element has a ceramic filling.

Consumers also respond positively to the options that are provided with four degrees of protection against water. Such devices, as a rule, heat water up to 60 degrees. You can count on a performance that is 3 liters per minute. The weight of the device does not exceed 2 kilograms.

The instantaneous water heater "Atmor", reviews about which are only positive, can have electronic control. This, according to users, makes the operation of equipment more convenient. Among other things, it will be more pleasant to use the device if it is equipped with an on-off indicator.

The capacity can be more than mentioned above, but the power is also increased. Thus, at 10 kilowatts you can count on 7 liters of water per minute. The weight of the unit will increase to 2.3 kilograms, as well as dimensions - they are 0.17 x 0.27 x 0.95 meters.

Overview of non-pressure and pressure devices

Quite often, consumers today choose products of the company "Atmor". A flow-through water heater, the repair of which, it is quite probable, will not be needed during the whole service life, can be non-pressure and pressure head. Some users do not need large amounts of water, so power is quite acceptable to choose at 4.5 kilowatts. Productivity, respectively, will be reduced, with the above characteristics it will be 3 liters per minute. If there is an unstable water pressure in the house or apartment, it is best to choose models that have a special built-in protection.

Installation Instructions

In stores today you can find the described equipment of the company "Atmor". A flow-through water heater, the installation instructions of which are presented in the kit, provides the right choice of location. You must decide whether it will be convenient to use the device at the shower place. The master must exclude moisture or water from entering the appliance, as this is dangerous for life.

Consider the future piping, how convenient it is to connect the water heater to the water supply system. In the presence of uneven walls, installation work is much more difficult.

After you determine the installation site, you need to remove the top cover from the device and attach it to the wall surface to determine the future position of the device. With the help of a drill, it is required to drill holes for dowels. Screws will allow to fix the device to the wall definitively. Water heaters flowing "Atmor", the price of which was mentioned above, are devices that have proven themselves in the market of related products.