Xerox Phaser 6000: the ideal printer for small workgroups

Xerox Phaser 6000 is an excellent printer for organizing a printing subsystem within a small workgroup with up to 15 jobs. Laser technology, which lies at its basis, allows you to print the documentation in the right amount and has excellent speed specifications. It is this peripheral device that will be discussed in detail later.

List of equipment

Excellent equipment for printing can be boasted against the background of competitors. It includes the following:

• Printer Xerox Phaser 6000.

• Instruction and warranty card.

• USB системного блока персонального компьютера. Interface cable for connection to the USB port of the PC's system unit.

• с адаптером питания . Power cord with power adapter .

• Cartridge with the starting toner volume.

• Disk with a full set of current drivers.

The above list is enough to start using this printer for its intended purpose. In the future, as the toner is used, it will be necessary to refill the cartridge. After the development of the resource of the latter it will be necessary to replace it with a new one.

Connection and configuration instructions

The algorithm for connecting and configuring this printer consists of the following steps:

1. Unpack the laser printer.

2. Remove the fixing film and bolts from it.

3. Install the cartridge.

4. Install the printer next to the PC.

5. We connect the printer to the computer with the interface cable, and the power wires with the adapter to the power supply network.

6. Turn on the printer using the "Power" button.

7. Install the driver CD in the CD-ROM drive. Install them.

8. At the end, print a test print page.

After carrying out these manipulations, everything is ready, and the printer can be used for its intended purpose.

Technological features. Resolution of the output documentation

As noted earlier, laser printing technology underlies the Xerox Phaser 6000 device. Its key advantages today are high speed and the ability to output documentation in a large amount. It is these two important advantages that the solution under consideration can boast of. Another important advantage is the ability to print in color. As a result, its only drawback is the low resolution of output documents, which in this case is only 1200X1200. For ordinary documents, this permission is enough. But if you need to get very, very high-quality photos, then it's best for these purposes to use a photo printer with inkjet printing technology.

Model of the cartridge. Resources

Since this printer allows printing in color, it uses 4 types of toner for this purpose and is equipped with 4 cartridges. The main cartridge of model 106R01634 is aimed mainly at using in monochromatic printing mode, is charged with black toner and has a doubled print resource, which is equal to 2000 pages. The other three cartridges are refilled with toner of blue, magenta and yellow respectively. Their models are 106R01631 (blue), 106R01632 (magenta) and 106R01633 (yellow). They contain a reduced amount of toner and the resource of their printing is two times smaller and equal to 1000 pages.

Switching for output organization

Only one wire connection method is implemented in the Xerox Phaser 6000. The reviews, of course, indicate that the most universal and basic way of connecting printers and multifunction devices to date is USB. Its version is 2.0. But from a technical point of view, it is fully compatible with the standards 1.0, 1.1 and, of course, 3.0. In the first case, the performance of the print subsystem will not significantly decrease, and in the second case the potential of the wired port of the personal computer will not be fully disclosed. The disadvantages in this case include the lack of a wireless interface "Wai Fai" and the network port RJ-45. The presence of any of these methods of connection would have an extremely negative impact on the cost of the device, and in order to minimize the latter, developers were forced to abandon such additional and convenient options.

The speed of the printer. Supported Formats

To the strengths, of course, can be attributed the speed with which the output pages Xerox Phaser 6000. In monochromatic printing mode, the hero of this review is able to display 12 pages in one minute. In color mode, this laser printer of the budget class is able to print 10 pages already. If you take into account that this is not a black and white device, but a color one, then its high-speed specifications are quite typical for entry-level printers. The largest format on which the solution can be printed is, of course, A4. All other unified sizes of smaller pages are supported by this printer. ² и 163г/м ² . The paper weight for this printer is limited to 60 m / g ² and 163 g / m ² . That is, even on paper and cardboard, the product in question may well be printed.

The opinion of the owners. Printer price

Of course, certain shortcomings are inherent in such a peripheral device as the Xerox Phaser 6000 printer. The reviews in this regard stand out as follows:

• A fairly modest interface kit, which includes only one way of connecting - USB. But in the case of the most affordable printing solutions, something more can not be expected.

• Modest print quality in comparison with inkjet solutions. But the speed with the volume will be worse.

The advantages of this laser plus are much greater. In this list there are high speed, color printing, support on A4 and smaller formats, and very democratic value, which at the moment is equal to 4800 rubles. It is the latter advantage that distinguishes the laser printer in question against the background of competitors.

Let's sum up the results

All previously mentioned indicates that the Xerox Phaser 6000 is perfect for small workgroups. Also this printer will look great at home. Moreover, the price is really very "modest" for him. Another area of its use can be a copy center. But in the latter case, he is only partially able to cover his need for printing and document circulation.