Homeliness, Tools and equipment
What kind of firm is best to buy the engraver? Types and types of tools for engraver
An engraver is a microdrill that performs the same work as a grinder or a conventional drill, but it is used for small parts and blanks. The engraver can perform grinding, drilling work, as well as milling, engraving, etc. The range of machined parts is wide enough, from wood to glass and steel. It is easy to guess that a variety of attachments for the engraver are used to carry out works of varying complexity and purpose. We'll look at them in this article.
Some general information
Virtually any tool can boast a large number of baits. They are made of different materials, have different in form working organs, hardness and much more. But any drill or Bulgarian can envy the engraver, because the nozzles for him can not be considered. On sale you can find both small sets consisting of several elements, and professional sets, in which there is absolutely everything for successful engraving. But before we come to the consideration of attachments, I would like to note that not all of them are suitable for the engraver of a particular firm. For example, many companies produce such collets, which are suitable only for branded nozzles. That is why it is desirable to acquire a set of collets, which are needed to clamp the nozzles. Well, after that you can proceed to the selection.
About diamond cutters
Diamond tools for engraver are very popular. This is due to the high strength of the product. Such a nozzle can handle strong mineral rocks and metals with high hardness. Nevertheless, the cost of diamond cutters is quite high. They are usually sold in a small set of 10-20 pieces. All of them are used exclusively for fine-tuning of shaped holes. But it's worth noting that the cutter is made of tool steel, and diamond spraying is applied over it. That's why, not observing the rules of operation and using attachments for other purposes, you risk damaging the spraying, because of which the nozzle will in some way become useless. As a rule, we are talking about technical diamonds, so the set will cost about 200-300 rubles. Shank diameter in standard version is 3 mm.
Often on sale you can find a set of nozzles for engraver made of rubber and corundum. Often such products are used for processing metal, in particular stainless steel. The set price is 200 rubles, the shank has a diameter of 2.3 mm. The set consists of six nozzles, having a different shape. Abrasive cutters of the company "Fit" are very popular. They are available in red and green color, which in fact serves as a marking. Reds are used for processing metal products, but they are made of aluminum oxide. Green is used for engraving items made of marble, glass and tiles. They are made of silicon carbide. Irrespective of the color of the cutter, they have a shank of the same diameter, but the shape of the nozzles is different, which makes it possible to use them more widely. In general, such a set of baits for the engraver is suitable for household use, professionals need more advanced options.
Felt cutters and polishing paste for them
Often, the engraver is used for grinding. For such works, nozzles made of felt are very suitable. True, the material with which they can work is limited, but that's not the point. Usually felt felt cutters work in pairs with polishing paste, which also happens to be different. For example, for metal products, paste made of paraffin and polishing powder is used. This is the cheapest option - 40 rubles.
Polishing nozzles for wood engraver also exist. The same applies to material such as glass. If you need to remove scratches from the surface, and make the tree smoother, take a diamond paste. Usually it is sold in a wide range, but it is best to give preference to the paste granularity 3/2 and 5/3. The price of one jar is 70-100 rubles, depending on the manufacturer. By the way, an excellent company, producing high-quality paste - OOO Superabraziv.
Electric Engraver: Nozzles for professionals
If a professional works with an electric engraver, then most often he has a special, relatively small suitcase. It has attachments of any shape and material. Such a tool emphasizes the professionalism of the master and his great experience. The fact is that often when working with one material, different forms of baits are needed. Some of them can not be bought one by one. Of course, there is such an option - to make yourself, but it is only useful if the work is done for yourself. The rest is better to buy a professional set. There you can find felt, diamond, abrasive, sandpaper, as well as wire cutters, which are used to remove paint and rust from metal coatings. For example, cutting discs for engraver find it is difficult, but in the set they are. The same applies to the most diverse mills. It will cost such a set not cheap, about 600-700 rubles (depending on the manufacturer). However, such an assortment allows the master to perform work of any complexity with any material.
The engraver from this manufacturer is well known. In most cases, such equipment is preferred by professionals. This is due to several factors. The main one is the cost of an engraver. The second factor is the price of baits. It would seem that you can still spend money on an engraver, because it is bought once, but the high cost of attachments is too much. As a rule, we are talking about 300 rubles and more apiece. This is very, very much. And even many specialists accentuate this attention. Nevertheless, Dexter's engravers are very high-quality and many consumers in their reviews recommend them to buy not only professionals but also amateurs. As for the baits, you can not say anything about them.
Can I buy Chinese attachments?
But this question really interests many. Someone will definitely say that Chinese products are worthless and do not even need to look in that direction. In part this is a true judgment. But there is one but. Sets from China are really cheap. Usually 5 or 7 times cheaper than the original cutters. Of course, if a professional sits behind an engraver, then there is no difference. Chinese counterfeits break much more often than original products, so at a price the same will happen. But if you are a beginner and do not know where and how to use this or that cutter, you should choose Chinese products. First, you can get a precious first experience, and secondly, it will be relatively cheap. Of course, you should understand that you do not have to count on any strength and durability, but for starters this is quite tolerable stuff. In addition, Chinese products are sold in a wide range, which will allow selection of attachments for every taste with the necessary shank diameter.
Zubr nozzles
We have already figured out that Chinese cutters are more suitable for beginners. If you are already a more advanced user, then for sure you will like the cutter "Zubr". This domestic manufacturer offers a very good choice for a relatively affordable price. For example, a set for engraving machines, consisting of 180 items will cost only 1000 rubles. If in this case we talk about the piece cost of the cutter, then we get a ridiculous amount. In the set you can find attachments of various grain sizes, for grinding, engraving and cutting works. The shape of the baits also differs. In addition, the attachments for the engraver "Zubr" are delivered in a convenient plastic case, which simplifies transportation and storage. In general, this is just an excellent solution for performing work of any level of complexity. Cheap and angry, otherwise you can not say.
If you are engaged in engraving professionally, then you are best suited to the cutter company "Dremel". Of course, these are very expensive products. One nozzle usually costs 400 rubles or more. Nevertheless, it is capable of replacing 10 Chinese analogues. It can be noted and high accuracy, and quality of work, as well as "cleanliness". Although all these parameters largely depend on the master, the instrument plays its role. In this case, the master can be sure that there will not be a sudden rupture of the disc during operation, which is often the case with fakes. In addition, the discs and cutters of the "Dremel" production wear out much more slowly, so they are used by professionals. In general, the nozzles of the company "Dremel", as well as "Dexter" are good, but the price makes you think. Therefore, they can be advised only to people who are engaged in engraving professionally.
In recent years, self-made nozzles have been increasingly manufactured. The advantage of this solution is that it is relatively cheap. But, as practice shows, many make cutters themselves not because of the price. Usually it's about longevity, especially when it comes to low quality and medium quality nozzles. For example, all the attachments on the rubber drum break down very quickly, so the home craftsmen make them from plywood. This roller is more durable and practical. Again, self-made attachments for engraver are unlikely to suit a professional, but here for engraving at home - this is one of the best solutions. In conclusion, I would like to say that we should not forget about the means of individual protection. The fact is that in the process of work a large amount of fine dust is formed, therefore it is necessary to protect the respiratory tract and eyes. Suitable glasses and a respirator.
Similar articles
Trending Now