It is simply impossible to do without water in the country. Most often, a well with their own hands is almost the only way to solve this issue. Someone may have an objection in this regard that the well will be the best option. However, in its production, you can face a huge number of negative aspects. Digging a well is a very costly affair, besides, it's impossible for anyone to cope with it practically. A drilling of water wells with their own hands - this is a very real option for most summer residents.
After the mine itself is received, it will be necessary to insert a pipe, and then attach fasteners, which will allow it to stay in place and not creep. Mounting can be done independently, using a steel corner for this . It must be divided into parts, the length of each of which will be 30 centimeters, and one of them to close in a ring. The ends of the corner are required to close around the pipe, using a bolted connection for this purpose . The upper edge of the pipe should be provided with several apertures, which will allow air to enter through them inside. Without access to air, water can gradually acquire a musty smell, which is highly undesirable. In order to avoid foreign debris entering the well, it is necessary to make a cover that should be reclined for easy operation.
If you decide that the well with your own hands is the only way for you to provide the site with water, you should first determine the depth it should be. The easiest way to find out is to look in the well to the neighbors. If the water is at a level of about five meters or more, then for the work you will be quite enough garden borax. If the water level is below this level, more complex equipment may be required. It is a question of a tripod with a winch, with its help and a well will be drilled. You can manage with your own hands, but you will need an assistant.
When the drilling work is completed, you can proceed with its arrangement, namely - insert the plastic pipe and fasten it. It is undesirable to lower the pipe to the bottom, it should be left somewhere half a meter. So, the flow of water upward will be more easy and effective.
Well with your own hands: materials
To obtain a convenient and efficient design, it is best to use a solid plastic pipe. However, in the absence of such an opportunity, it is entirely permitted to compile it from parts. It is important only to make sure that the overall diameter does not decrease at the points of docking. This can cause a decrease in the pressure of water in the well. When the pipe is lowered to the desired level, it should be secured with a clamp, which will avoid the subsequent immersion. This technology has a minor disadvantage - in time the pipe will rise slightly, but this happens gradually.
Cleaning the well with your own hands is a fairly easy procedure, especially if you were drilling by yourself.