Homeliness, Building
Warm floor in the bathroom: types and features of the installation
A warm floor in the bathroom is not a luxury, but a way to achieve comfort. After all, after taking a hot bath so you do not want to step on a cold floor covering! The use of modern heating technologies will allow to get rid of such inconveniences.
Stages of installation
- Mount the warm floor in the bathroom is quite possible with their own hands. Start work on the arrangement of the heating system should be with the removal of the old floor covering. This is a prerequisite. If as a result of the work done the floor surface has uneven or other deformations, they should be eliminated. It is possible that you have to fill the leveling layer.
- Take care of the waterproofing. To do this, a moisture-proof film must be laid on the prepared roughing floor .
- Next, you need to lay the thermal insulation coating. The most common material is roll foamed polyethylene with a foil layer. Its use is due to ease of laying. And the foil acts as a screen, through which heat is reflected. In addition, the foil coating will also be heated from the heating element, so that the floors will be warmed evenly.
On top of the heat-insulating material, it is necessary to lay the cable or pipes of the warm floor. Do this in the form of a snake or a spiral. - Next, you need to fill the resulting structure with concrete.
- The floor covering is the last.
Water heated floor in the bathroom and its features
This heating option has long been used. This is due to the fact that the heat source in the form of hot water is now present in the required room. To arrange such a system it is necessary to lay special pipes in the form of a snake or a spiral and connect them to the heating system. Serpentine pipes are preferred, since the hot water supply and return will be located in parallel, which will allow an even heating of the entire floor.
Electric heated floor in the bathroom
Similar articles
Trending Now