Toilet Repair: Features of the procedure

It happens that the toilet starts to work not as expected, and the plumbing is broken. However, do not be frightened, because the repair of the toilet can be done independently. First of all, it is necessary to determine the nature of the failure and pick up the necessary material.

Often the first cause of breakage is the clogging of the drainage knee. If it is small, then you can use different chemicals that dissolve the cork, and a normal air vent. If the clogging is serious enough, you will have to clean the toilet with a coarse steel cable.

Further, the tank may fail. The repair of the toilet seat in this case depends on the type of breakage and the degree of its severity. For example, if you hear that water is constantly pouring from the tank, and the head is strong enough, it means that the float has moved from its place and needs to be adjusted. You do not need to use any tools for this. If this action does not help, then you need to check whether the element is damaged. In this case, you just need to replace it with a new one. When the water rises, the float valve should close, however, if it does not, replace it.

Further, the repair of the toilet seat provides for checking the valve if water is poured into the reservoir not through the bypass pipe. However, when performing this action, try not to overdo it so that the element does not break. If no actions help to achieve the desired effect, you will have to install a completely new mechanism.

If a small amount of water flows during the descent, the repair of the toilet bowl provides the regulation of the float. In this case, it is necessary to correct the thrust that holds the element. It also happens that the water is too slow. The reason may be in a too tight tap on the tank. It just needs to open a little more.

Repair of the toilet bowl should also be done if you notice water on the toilet floor. To solve the problem, it is necessary to look at all pipe connections and, if necessary, tighten the nuts. Sometimes you have to replace the elements that connect the drain and toilet. Perhaps a crack appeared in the tank, and water flows through it. In this case, it must be replaced.

Often rubber gaskets and gaskets can rupture in the reservoir. In any case, they will have to be changed.

Repair of the toilet is necessary to carry out, preliminarily shut off the tap, which provides the supply of water in the tank. However, caution is needed here, because the crane can be old, and then it can not be closed, which is fraught with a flood.

Naturally, for the normal operation of the toilet all the elements of the tank must be checked periodically. Perhaps you will be able to see the malfunction before it makes itself felt. Be sure to pay attention to the rigidity of water. The fact is that the lime scale considerably shortens the life of the parts.

In order to completely replace the entire contents of the tank, you will need a screwdriver, a wrench and a pair of pliers.

Timely preventive maintenance will help to save you from problems with repair of a toilet bowl. And this, in turn, will save you from additional costs.