To make a horizontal bar for a house is quite simple

With the onset of cold weather on open sports grounds, there are fewer and fewer people. Someone is afraid to get cold, someone just too lazy to leave the warm room. But not everything is so scary. You can do sports in full in the apartment, even if it is small. We need a horizontal bar for the house, which is not difficult to manufacture and install.

Varieties of home horizontal bars quite a lot. For a large apartment, for example, you can make a three-dimensional horizontal bar with a wall mount. It will be better if the house is paneled.

You need a corner with a shelf size of 4.5 by 4.5 cm and a length of 3 meters, a pipe diameter of 25 mm and a length of one meter and a pipe the same diameter of 60 cm.

We will do the turnstile in the garage, as it will require electric welding and a Bulgarian. First you need to cut the corner into 6 equal parts of 50 cm. Then lay out the corners in the form of an isosceles triangle, and start to weld them together. Since we are preparing a horizontal bar for the house, we try to do everything neatly and beautifully. Having made the first workpiece, we prepare the second one in the same way. Then we drill three holes in each corner. Through them we will fasten the bar to the wall.

After the workpieces are ready, we proceed to their connection with each other by the prepared pipe.

The first tube - 60 cm is welded slightly below the middle to the corner, which is opposite the corner, intended for fastening. The second, meter tube is welded to the ends of the triangles. The quality of the welding seam should be strictly monitored, avoid slagging and do not make passes. I think you yourself should know how to make a horizontal bar so that it is as safe as possible.

After welding, you can treat the bar with sandpaper, remove the burrs. The surface should be perfectly smooth. Then we paint it in the color that you like best.

Install a horizontal bar better together, because the design was cumbersome, but quite reliable and thorough. This house bar will serve until you decide to remove it.

We make the markings on the wall. It will depend on your height. The crossbar should be at the same height that will allow you to hang on it without touching the floor.

Using a perforator, drill holes with a diameter of 10 mm. Then we insert plastic plugs in them. After this, with the help of a partner, we fix our horizontal bar on the wall. Now you know how to make a horizontal bar with your hands and install it in the apartment.

There is a very simple option. It is suitable even for a small apartment. The main thing is that it had at least one opening. You can purchase a finished telescopic tube with an internal spring, or you can make a horizontal bar from a simple pipe.

We make blanks of strong material. They can be an aluminum or copper plate with a thickness of 10 mm, or a bar of solid wood. We cut out two preforms of U-shape and drill two holes in them. Then we process them so that they do not spoil the interior of the apartment. Now we attach these plates to the doorposts. Next, install a horizontal bar in the opening, and from the top we fix the pipe with decorative plates, attaching them to the fasteners.

Installing a telescopic horizontal bar for the house, you just need to drill two holes in the opening, corresponding to the ends of the pipe diameters. Since such a horizontal bar consists of two pipes and has a spring inside, it is not difficult to install it. It is necessary to press on the thinner end of the pipe, so that it enters the pipe of a larger diameter. In this condition, bring the bar to the holes, guide it and release the spring. Such a bar will not spoil the appearance of your apartment, and will be almost invisible. It can be done not only by children, but also by adults. After all, the door jambs serve as a support for him .

Now you know that it is not difficult to make a bar for a house.