Sprayer OP-2000: characteristics, purpose.

Sprayer OP-2000 - this is one of the units of equipment, which is quite widely used in agriculture.

Using the sprayer

This machine is designed and used as a sprayer in large fields, as well as flower beds, vineyards, etc. The main objective of this machine is to irrigate the soil, as well as the green matter growing on it, with useful substances, to protect plants against pests. It is important to note that the OP-2000 sprayer can be used in practically any climatic and geographic area. In addition, this machine can be filled with any pesticides that are intended for plant protection.

The only restriction for the use of this technique is the mountainous terrain, the slopes of which exceed the mark of 7 points. The success of the application of this technique is largely justified by the fact that it has a special design. The sprayer, which is this model, allows watering, as well as spraying plants, stems and leaves with any desired suspensions, pesticides or emulsions.

Most often the technique is used for irrigation of field plant crops. Fertilizer application from the OP-2000 sprayer is carried out in clearly dosed portions, which saves maximum funds and irrigates a maximum of the area.

What does the technique consist of?

Like any other technique, this design has the basic technical nodes that are fundamental.

• The first and most important block is, of course, the supporting structure. It consists of a power frame, which provides the fastening of other elements, as well as from the rod and polyethylene tank.
• Next is the pump block. The pump for the sprayer performs two functions - suction and discharge. In addition, the pump is equipped with filters, as well as distribution controllers, which come complete with a pressure gauge intended for pressure monitoring.
• If the first two components form the basis of the machine and its governing bodies, the nozzles with sprayers are the working organs that spray the plants.

Principle of operation

The principle of the OP-2000 sprayer is quite simple and straightforward. It should start with the fact that during operation the machine uses a 3-step degree of filtration of the liquid that needs to be sprayed. That is, the technique has at least three additional filters.

It is also worth noting that for proper and long-term operation it is necessary to take care of the anticorrosive coating of the places where the liquid passes. This is necessary because the pesticides or any other mixtures that plants treat are quite aggressive, which means they can quickly destroy the metal parts of the machine if they are not protected or poorly protected.

To move and control this technique you can use almost any tractor. It is possible to operate the spray boom directly using a hydraulic device.

Specifications

The sprayer of this model has a special mechanism that allows a person to change the height of the bar setting with spray nozzles even during the movement of the machine. The minimum height is 0.5 meters and the maximum height is 1.8 meters.

In addition, the capacity of the sprayer tank is 2000 liters. In addition, two injector mixers are installed on its bottom. Their purpose is to maintain the concentration of working mixtures at a given level. Still here there is a certain system of stabilizing the sprayer bar. In the event of a collision with any obstacle, the bar may deviate from the set course by 15 degrees vertically, and also by 45 degrees horizontally. After the obstacle is overcome, the bar will return to its original position.