Soft roof "Shinglas": installation instructions, technology, recommendations and feedback

Flexible shingles "Shinglas", the installation instructions which will help you to work without errors, is a high-quality material for the arrangement of the roof. Cloths are something like a puff cake.

general description

During production, it is impregnated with modified bitumen. As the upper layer is a basaltic powder, which can have different shades. It provides an attractive appearance and protects the roof from impacts. The lower layer is a self-adhesive polymer bitumen mastic, which has protection in the form of a siliconized film. It is easy enough to get rid of it before installation.

Customer Reviews

Before you will learn the instructions for installing the shingles "Shinglas", you need to familiarize yourself with the feedback of customers who have already used the described material as a cover for the roof of their house. Owners of private buildings especially note its frost resistance and durability. The first quality indicates that the canvas can be used in particularly cold climates. If we talk about longevity, the lifetime of flexible tiles is much longer compared to similar coatings. Private masters and professionals who are engaged in laying roofing, note a slight weight. This does not imply the need to strengthen the foundation. Supporting structures also do not have to be strengthened.

It is impossible not to pay attention to the reviews, in which buyers talk about the noiselessness. Even strong hail or rain will not be heard by those inside the building. Using the flexible shingles "Shinglas" during the work, the installation instructions are presented below, the professionals emphasize that after the completion of all manipulations, the minimum amount of waste remains. This is confirmed by statistics, even in the case of those roofs that have a complex configuration. In the latter case, the volume of waste is no more than 5%. The owners of private houses, which have been using the material described for more than one year, speak of its water resistance. This is due to the fact that the material forms a continuous coating, which is why the use of additional waterproofing is not required. The material is very resistant to aggressive media, and is also characterized by safety. The covering material is not magnetized, does not accumulate static electricity and does not contribute to attracting lightning. You can not be afraid that the roof will ignite, because the material is fireproof.

After stacking, you will not face the problem of high operating costs. This is due to the fact that staining and repair during use are not required. In addition to all the above positive features, which are reflected in the reviews, it can be noted that the flexible shingles "Shinglas", the installation instructions which allow you to exclude mistakes, has an excellent appearance that blends harmoniously into the landscape and serves as a real home decoration.

Work on the flooring

By giving recommendations on the installation of Shinglas, professionals point to the need for a serious approach to the issue of equipping the grounds. It should be smooth, hard and solid. It is important to ensure that there are no differences in height, but if any, they should not be more than 2 millimeters. When installing a large-scale flooring, it is important to ensure that the seams are unscrewed. For fixation, use nails or self-tapping screws. When laying a wooden floor, you must pay special attention to the annual rings. The material should be covered in such a way that the rings are facing downwards. When laying the base of plywood or OSB-3 at low temperatures, leave a gap between the adjacent sheets, the width of which is 3 millimeters. This will eliminate the deformation of the deck when exposed to elevated temperatures. If you install the flexible shingles "Shinglas" with your own hands, the instructions given in the article will allow you to achieve the desired effect. In the presence of boards of different thicknesses, which will be used to arrange the flooring, it is first necessary to sort them out. This is done so that the thickness of the base varies gradually.

It is important to ensure the installation of thicker boards so that they are located closer to the cornice, and as for thinner ones, they should be near the ridge. Joints should be on supports, in these areas boards are strengthened with the help of nails in an amount of 4 pieces, but not less. If you plan to use damp wood, then the boards are attached to 2 screws on each side.

Work on the cornice overhang

If you plan to do the work yourself, then you will need the installation instructions "Shinglas". The technology of laying roofing material is presented in the article. In order to strengthen the cornice overhang, steel curtain rods should be used . They will protect the material from external factors. Planks must be fixed to the edge of the base with nails, which are installed in a staggered manner with a step of 15 cm apart. Planks should be mounted with an overlap, the width of which is 5 centimeters. In these areas, the fastener is installed at a distance of 3 cm.

Work on the lining carpet

If you decide to use the soft shingles "Shinglas-Jazz", the installation instructions for this material will help you. Lining carpet, regardless of the slope, is laid throughout the area. Near the cornice overhangs and in the valleys it is necessary to lay the underlay self-adhesive material ANDEREP. It will protect areas where leaks are most likely. Particular attention should be paid to the cornice overhangs, in these places the self-adhesive carpet must be laid in such a way that its width is greater than the cornice.

Carrying out the markup

These manipulations are performed in order to designate the guide lines along which the roofing material will be laid. This is especially true for the unusual geometry of the ramp or in the presence of structures that are embedded in the roof. Vertical lines should be applied at a distance that is equal to the width of the tile shingles. Between the lines should be placed tiles in five rows. This indicates the need to remove vertical lines from each other by 80 centimeters.

Features of laying flexible shingles

If you decide to use the soft shingles "Shinglas Rancho" for the work, the installation instructions for this material will help you to avoid errors. Gonta from the packages should be pre-mixed. If the thermometer's column has dropped below +5 degrees, then it is necessary to put the packaging in advance in the room, the temperature in which is +20 degrees. The adhesive strip on the material should be heated with a construction hair dryer. If it is necessary to cut material on the roof, it is necessary to carry out the work on the board, which excludes damage to the coating.

Installation Recommendations

If you yourself will be installing the soft roof "Shinglas", the instructions presented in the article will help the master who does not have enough experience. Each shingle should be reinforced to the base with galvanized nails, which have wide hats. The number of nails will depend on the angle of inclination of the ramp. If you want to work with a roof, the slope of which does not exceed 45 degrees, then each canvas should be nailed with four nails. If the degree of the ramp is higher, you will need two more fasteners. The nails should be level, they must be installed in such a way that the hats do not cut into the roof surface, but are in the same plane with it.

What the master needs to know about the starting line

If you will be done independently installation of the soft roof "Shinglas", the instruction will help you deal with the technology. For the starting strip, it is necessary to use skate-cornice tiles, but shingles and ordinary material will fit, this sheet will need to cut off the petals. This element is spread over the cornice bar so that it is 2 centimeters above the inflection. It is worth remembering that the width of the deviation from the inflection will depend on the length of the ramp and the angle of inclination. The steeper the slope, the more impressive the width should be indentation. If the work is supposed to use sheets that have the form of cutting "dragon tooth", then pruning is not necessary.

Stacking technology

If you use flexible shingles "Shinglas" as the roofing material, the installation instructions given in the article will help you to understand the nuances of the work. If there is a rather long slope, installation is recommended to start from the central part. This will make it easier to align horizontally. From the initial strip should retreat 2 cm, after you can proceed to install the first shingle. The master should pay attention to the fact that the junction of the first-row cloth does not have to coincide with the joints of the elements that make up the starting strip. Depending on the shape of the cutting, the installation can be carried out by the method of diagonal strips, in the form of a pyramid or vertically oriented elements. Second-row cloths should be started from the central part of the ramp, moving horizontally to either side of the 1/2 petal with respect to the tile of the first row.

Conclusion

If you use the soft shingles "Shinglas", the installation instructions presented above will certainly help you. The extreme shingles of ordinary material in the areas of absence of the adhesive should be treated with bituminous mastic. It is important to process the width of 10 centimeters. The upper corners are cut to 3 centimeters to effectively combat the effects of water. All these rules are recommended to perform, only then the roof will last a long time, as well as it will look attractive for the entire lifespan, as every specialist and home master dreams about.