Rubber seals: characteristics, advantages, installation features

To ensure reliable heat and sound insulation, windows and doors require sealing of the slots with a sealing profile. How to choose and install rubber seals? We'll talk about this in this article.

Quality of material

Rubber acts as an extremely common material widely used in industry. If we talk about the rubber seal for windows and doors, the latter has good elasticity, is able to withstand the effects of low and high temperatures, the influence of other environmental factors.

The service life of the sealing profile made from this production base is about 10 years. However, only with the right periodic care.

Seal maintenance

To reduce the possibility of dust, dirt and cold entering the room, rubber seals should be wiped periodically with a damp sponge during operation. Also, it is not superfluous to treat their surface with a special protective agent based on silicone. Alternatively, glycerin can be used as a substitute for silicone. For rubber seals to last as long as possible, the procedure is recommended at least twice a year.

Rubber Seals - Functions

The sealer acts as an accessory of the window and door profile. The list of its main tasks includes:

• Prevention of penetration of foreign sounds and smells into the room;
• Prevention of drafts;
• Sealing joints - ensuring reliable jointing of structural elements.

Benefits

What are the advantages of a rubber seal for windows? First of all, such profile products are characterized by endurance and special durability. An important factor for the bulk of consumers is the low cost of similar products.

Sealants of this category are made of acid-resistant rubber. Such material is characterized by high-tech execution and, accordingly, excellent quality.

Preparing for installation

Install rubber seals can be independently, without recourse to specialists. However, before you start working, you must remove the old insulation profile.

Coping with the task is not so difficult. It is sufficient to use a sharp blade or spatula. After releasing the grooves from the old seal, the surfaces must be freed of dirt and thoroughly wiped away from dust. This is required for better adhesion of the adhesive solution and, accordingly, the realization of the quality of the future profile.

Installing a self-adhesive sealant

Self-adhesive rubber seal profiles are much easier to mount than products that fit into the groove. For installation, you only need to remove the device from the protective coating in the form of a tape, and then proceed to its gluing along the perimeter of the window frame or door leaf.

If the seal rubber self-adhesive does not adhere well to the surfaces, to ensure reliable jointing, it is possible to additionally treat the joints with glue or sealant.

During the replacement of the sealing profile, it is not recommended to use separate pieces of material. As in this case the probability of insufficient quality sealing of joints increases.

Particular attention during the installation should be given to the application of material in the corners of the structures. It is in these places that the risk of poor gluing and wrinkling of the seal increases significantly.

Helpful Tips

There are a number of recommendations that can benefit from the installation of the sealing profile:

1. When sealing the entrance doors that go to the street, it is advisable to resort to installing several layers of rubber seal. And one of the layers should be put directly on the door frame.
2. When buying branded windows or doors from proven manufacturers, the seal should always be included. Therefore, before you take your purchase, you should check it again.
3. To securely fix the rubber sealing profile, use silicone adhesive. The use of this approach to installation helps to maximize the sealing of joints.
4. It is highly recommended that the sealant is not applied to freshly painted surfaces. For a good fit of the product it is desirable that at least two weeks have elapsed since painting.

As you can see, just a few simple steps separate a person from creating comfortable conditions for living in their own home. At the same time, to ensure that the sealer lasts as long as possible, it is necessary to ensure regular maintenance of the material at the junctions.