Pyrolysis plant for solid waste

Pyrolysis devices for the disposal of solid domestic waste have many advantages. First and foremost, it is important to note that they are environmentally friendly. The average performance is 120 cubic meters. Meters per hour. The standard installation consists of several blocks. In the central part of the modifications there is a volumetric chamber.

Pumps are used in different capacities. Receiving funnels are mainly located in the upper part of the structure. Capacitors are located above the shutter. The throttle valves are fixed above the fan. Also pyrolysis type units are produced with air heaters. Many models use several nozzles. Over the water baths are Schvelshahti. Smoke exhausters are installed over gas analyzers. Gas cleaning systems are used in various classes.

The device itself

It is done pyrolysis installation by own hands is rather difficult. First of all, a large camera is required for the assembly. The hopper should be small in size. If you believe the experts, then it is better to use a bolt with a blocker. Condenser for modification is necessary for liquid products. Throttle valves are used to adjust the temperature.

After installing the fans, the pump is attached. Air heaters are mainly used in tubular type. Water baths are usually installed in the lower part of the structure. In many models, the shvelshahta is fixed under the pump.

Mobile Modifications

Mobile pyrolysis plants for waste are produced with pumps at 2 W. For many modifications, the throttle valve is of small size. If you believe the experts, the performance of mobile modifications is at the level of 100 cubic meters. Meters per hour of operation.

The limiting temperature of the models is located at 430 degrees. It is also worth noting that the mobile pyrolysis plant is made with water baths of compact dimensions. The permissible pressure in the devices is low.

Stationary aggregates

Stationary pyrolysis type plants are characterized by high productivity. At the same time, their pressure is at least 40 Pa. Protection systems are used in the PP20 series. Many models use two throttle valves. The operating temperature of the modifications is approximately 230 degrees. By parameters, the capacitors of stationary modifications are very different. Pumps are generally used at 4 watts. Smoke exhausters are installed in different diameters. The closures are located only in the central part of the chamber.

Installation parameters of the LL-2200 series

This continuous pyrolysis plant is produced with a dual chamber. The thermal treatment of the modification does not take much time. The performance parameter is at the level of 400 cu. Meters per hour. The hopper in this case is located above the water bath.

If you believe the opinion of experts, the protection system is of high quality. In this case, the throttle valve is capable of withstanding a pressure of 4 Pa. The flue gas in the modification uses a small diameter. The shutter is normally used with a pass-through type lock.

Features of the LL-2300

This pyrolysis plant for MSW boasts a high parameter of permissible pressure. If you believe the opinion of experts, the thermal treatment does not take much time. The filtering system of the modification is of the KE400 class. It is also worth noting that the capacitor applies only one. Many specialists point to a wide line. The water bath in this case is above the camera. The modifier has a pass-through type. The maximum temperature parameter is 380 degrees.

Unit Specifications LL-2400

This pyrolysis unit is made with two water baths. If experts are to be trusted, they can withstand a pressure of no more than 4 Pa. The filtration system for the modification is of the PE500 class. At the same time, only one throttle valve is used. Schwelschacht is used without a bolt. The receiver funnel is located above the camera.

Many experts say that the device is not afraid of overload. The gas analyzer is used without a meter. If we talk about shortcomings, it is important to note a small nozzle. The air heater in the structure is of a tubular type.

Settings of the FAS-8-1 / VP series

The presented pyrolysis type installation has many advantages. First of all, experts say that the modification uses a quality shutter. In this case, the throttle valves are capable of withstanding a large load. The hopper at the modification has only one. Directly the filtration system with its tasks is doing fine. The capacity of this pyrolysis type plant is 130 cubic meters. Meters per hour. All this became possible thanks to a powerful air heater.

Directly the pumps are applied at 3 watts. If you believe the experts, the shvelshahta is used in compact dimensions. However, she is able to withstand the pressure. The maximum temperature is set at 450 degrees. The protection system in the installation is of the class PK30. The gas analyzer at the modification is installed near the fan.

Features of the device FAS-8-2 / VP

This is a qualitative and productive pyrolysis plant. Processing of solid waste in this case is very fast. The air heater at the modification is used with one pump. If you believe the experts' opinions, then the nozzle is installed only one.

The receiver funnel is used in small dimensions. Many experts say that the modification is capable of withstanding a pressure of 4 Pa. The filtration system is not of high quality. In this case the shvelshahta is installed in small dimensions. In total, the design has two throttle valves. The valve at the modification is located behind the fan.

Characteristics of the FAS-8-4 / VP unit

This continuous pyrolysis plant is produced with two closures. Due to the wide intake hopper, high productivity is ensured. The protection system for the modification is applied to the PK30 series. Overheating of the shutter is quite rare. The gas cleaning system is used first class. Nozzle for a shvelshahta applies only one. The limiting temperature for the modification is 340 degrees. At the same time, the pressure is maintained not more than 5 Pa.

Settings of the FAS-8-5 / VP series

This pyrolysis plant from other models has a high camera. In this case, the water bath is used with a gas cleaning system. If you believe the opinion of experts, the filtration is of high quality. The filtration system for the modification is provided for class PK33. In this case, the receiving funnel is protected by a reliable cover, which is equipped with its own blocker.

The shutter in the modification applies only one. Many experts say that the capacitor is capable of operating at high temperature. The maximum pressure it holds at 3 Pa. The heated air nozzle withstands loads of 5 N. The air heater is standardly used in the tubular type.

Features of the device FAS-8-10 / VP

This pyrolysis plant is manufactured with large blocks for waste heating. There is only one water bath for the modification. If you believe the experts' opinions, the problems with overheating of the nozzle are very rare. The protection system in the installation is of the class PK33. The operating temperature is 450 degrees. The hopper is small in size. Shutter in the modification is installed with a quality lock.

Condenser modification is able to cope with various liquid products. Many experts say that the throttle valves can not withstand a heavy load. The flue gas in the modification is used with its own filtration system.

Characteristics of the FAS-8-13 / VP unit

Pyrolysis plant of this series is in great demand. Some experts say about high productivity and high-quality water bath. Also worth noting that the modification has two shutters. Thus, problems with the receipt of waste should not arise.

The protection system of the model is of the class PK40. The gate is used as a gate type. A capacitor applies only one. The maximum overload parameter is at the level of 5 N. The system for protection against waste burning in this case is absent. The air heater at the modification is located behind the fan.

Settings of the FAS-8-15 / VP series

This pyrolysis plant is produced only with one shutter, and the manufacturer does not have a blocker for it. If you believe the opinion of experts, the stopper is very rarely blocked. The protection system of the model is of the class PK45. Many experts say that the model can work in different conditions. The gas analyzer is used in the third class.

A water bath is used only one. It is also worth noting that the capacitor is a drive type, and it is equipped with a separate fan. The limiting temperature of the modification is 450 degrees, and the pressure on the damper is 4 Pa.

Features of the device "Fortan"

The pyrolysis plant "Fortan" is remarkable in that it has two shutters. Waste loading does not take much time. Harm to the environment, it does not cause. If we talk about the indicators, it is important to note that the limiting temperature is at a level of 400 degrees. The protection system for the modification is of the class RK300. In this case, only one is used. This fan uses a large power.

Also, it should be mentioned that the model is capable of operating in an autonomous mode. The pump is used for 3 watts. The gas cleaning system is of the third class. Many experts say that the modifications are good at overloading. The capacitor in the model is driven by a drive type. In total, the device uses two blockers and one solution. The limiting pressure of the modification is 8 Pa.