Protective glass on the phone how to glue correctly? Step-by-step instruction

A smartphone is an expensive thing. Even acquiring a budget class device from 5 to 15 thousand rubles, we want it to serve long and true. The loyalty of the gadget, in turn, depends on two parameters: internal and external. And if at first (represented by the hardware part) we can not influence, then we are able to overcome external factors just the same. We can protect your smartphone if not from drowning, then from mechanical impact for sure. And help us in this glass on the phone. How to glue it? Today we will talk about this.

What is a protective glass for?

It is difficult not to agree that the continued use of any smartphone does not imply the occurrence of chips, cracks, scratches, scuffs. This fate is typical not only for the side faces, the upper and lower ends and the rear panel, but also for the front part. And there is almost the most important element - the smartphone screen. Protective glasses were invented precisely in order to protect the display device. Use it is possible and the film, but it has a lower coefficient of protection. In any case, it is important to know how to properly glue the protective glass on the phone.

What it is

The appearance of the protective glass is similar to the exterior of the film. Indeed, the tasks of these two elements are similar to each other. However, the protective glass is rightly considered to be a more reliable component, since it has a higher density than the film. In addition, it is transparent and flexible, and this also has a certain importance. Of course, it will cost more than the film. However, it's worth it, especially in cases where there is either a high probability of mechanical impact, or when the gadget is really expensive. For all this is a different bar, but most users prefer to buy glass, if their devices cost more than 10-15 thousand rubles. Buying a protective glass, the user reduces the probability of damage to the main screen to almost zero, since the whole impact on the above described component. Before I talk about how to glue tempered glass on the phone, I would like to focus on the advantages of the element.

Functions and useful properties

Much about the functions of protective glass can not be said. From its name and so it is clear why it was designed and what it is intended for. Whether the case features that you can talk about for hours. Their list, for example, includes resistance to scratches and other similar damages. Someone may doubt this parameter, but usually all doubts fall away after the demonstrative test. You can use ordinary keys for this. Spot the pointed edges along the glass, and you will see that it really is not covered with traces.

The second useful property of the protective glass is the damping of impacts. About this in short we already mentioned above. A large number of smartphones when falling down the screen surface get physical damage right up to the full splitting of the display. With a protective glass, this problem will be solved, because instead of the screen it will break. By the way, the word "break" here should also be understood a little different from its usual meaning. Shards from the phone's protective glass do not fly apart. Finally, we can note the fact that the glass is kept very, very reliably. Especially if we compare it with a simplified element - a film. Users, who so often ask questions about how to properly glue the glass on the phone, can be pleased to learn that this operation does not need to have any special experience.

We are considering the complete set

A very large number of inquiries is connected with how to glue the film (glass) on the phone "iPhone 6". However, it should be understood that the process is, in general, similar for other devices. And why then stop on specific models, if you can describe the operation universally? First of all, let's see what is in the box with the protective glass? Different manufacturers offer different equipment, but usually there is a glass, an alcoholic napkin and a cloth made of special material. If there are no cloths or napkins, then you can use improvised analogs, this is not important.

Glass on the phone: how to glue? Preparing the surface

If you previously installed a film or glass, these components will need to be removed. To do this, remove the cover, if it is, then we catch the element by the edge. To prevent the appearance of greasy stains on the glass, you should wash your hands thoroughly and dry them. By the way, the important stage is the preparation of the workplace. We need a flat horizontal surface and powerful lighting. This can be, for example, a table. Lighting will help avoid unnoticed divorce and dusty areas. So what does it take to integrate the glass on the phone? How to glue it? The correct operation will only be if the "bare" screen is processed in advance.

Why do I need cleaning?

Clean the film, freed from the film or glass, with a damp disc or alcohol wipe soaked in alcohol. Wipe the screen carefully so that no contaminants remain on it. After this, wipe it with a special cloth if it is included. If it is not there, then you need to find an analog. Now it's time to attach the glass to the phone. How to glue? We learn further.

The most important stage

There is a special film on the adhesive side of the glass. It must be deleted. After that, apply the glass itself to the screen. Care should be taken to ensure that it is aligned at the edges of the apparatus, aligned with the speaker and control elements. By the way, you need to remember that you can only keep the protective glass by the edges. Only in this case there will be no traces after the operation. When the fit is complete, simply drop the component onto the screen. The glass will stick itself. Great, now we know how to glue the glass on the phone.

Are there any disadvantages?

Yes, like other elements, protective glass has some drawbacks. Some users who are interested in how to glue protective glasses on the phone may think that the main drawback is the illustrative complexity of the integration process. Like, if you mis-paste the first time, then you will not do anything. In fact, now it's not about that. The main disadvantage of this component is the fact that the device to which you will glue it will become more voluminous and heavier. However, if this does not bother you, and you are not very sensitive to the mass-size indicators of the phone, but want to protect it, you can contact the mobile phone. They will offer not just the best products, but for additional money they will be able to glue the glass qualitatively.

Pitfalls and tricks

Most users are afraid of air bubbles. Or rather, that they will remain. Few can boast of the fact that the protective glass is glued neatly the first time, and there are no bubbles. However, you can easily deal with them with a dry cloth. The procedure is simple to horror: just squeeze bubbles from the center to the periphery. The ability to glue protective glasses will save money, which is taken for this procedure in the mobile communication salons.

Price list

Now protective glasses are quite important and common accessories. Therefore, a large number of companies are engaged in their production. Budget options are represented mainly by Chinese firms, which could be expected. However, they are not so bad. The glasses of different brands differ among themselves only by the degree of hardening. Nevertheless, one should not think that the glass from the Chinese company does not provide the necessary degree of security. Now, after we learned how to glue tempered glass on the phone, you can move from words to deeds.