Hobby, Needlework
Peony from beads: photo, scheme of netting, master class for beginners
For beginners, the provided master class can be both the beginning of the creative path and simply an interesting activity. Live bouquets of flowers are very beautiful, but being cut, they are short-lived. Completely another thing - the unfading bouquet.
Peony from beads: a master class
1. On the wire, dial the beads directly from the coil, approximately 1 meter.
2. Twist the remaining end of the wire so that one small tip remains about 10 centimeters.
3. At the small tip, dial 20 beads.
4. Slide the large central tip perpendicularly with a small piece.
5. Wrap the main wire around the small wire, making one turn around it.
6. As a result, you have two arcs. Do this in a circular fashion until you have seven arcs.
7. Then cut the wire and screw it.
8. The loop should also be cut.
9. The other tip needs to be folded.
10. Leave 3-4 mm from the fold and cut off.
11. You must get out the petal. By the way, such lobes from seven arcs you need 6 pieces.
12. Now make the petals of eleven arcs. They are made just as easy.
13. Such petals of eleven arcs will need 14 pieces.
14. Now we make the middle. Continue without cutting the wire. On the cochlea, we collect the beads and count 40-50 beads.
15. Make a loop.
16. Further, without cutting off the wire, retreat 5 millimeters and again count the beads. Do it until you get 10 loops.
17. Now make a bud and leaves. By the same principle, we make four petals for the bud. By the same technique we make leaves.
18. First, type the beads of green, then the main and vice versa. Cut approximately 50 centimeters of wire and make a loop. Then, type 10 green beads and again the main color. Repeat until the desired result is obtained.
19. You should have a petal of 11 arcs.
20. You need to make such 4 petals of 11 arcs.
Assembling a peony from beads
1. Take the wire for the stem. Top on the tip, grasp a piece of double-sided scotch and screw the middle of the hinges, for a fortress, wrap it with a wire. You can also use threads.
2. Then it is necessary to fasten narrow petals.
3. Also in a circle, fasten the big petals, thereby completing the making of the sepals.
4. The sheets will need to be screwed with a wire 1 mm thick.
5. Wind the stalk of the leaves with a strip of scotch and a strip of corrugated paper.
6. Take the wire 0.9 mm and fold in half. At the tip, glue with a scotch petals for the bud - one opposite the other. Connect a piece of wire in the middle and form a ball. You will have a bud.
7. Then it is necessary to glue the leg with adhesive tape, decorate the stalk with a satin ribbon over the tape. In the course of work, attach one leaflet of leaves.
8. In the same way, create the main flower. After that, wrap the bud with scotch tape and then tape. Do not forget to attach the bud and leaves.
As a result, you should get beautiful man-made flowers - peonies from beads. The scheme of weaving is not complicated and is accessible to modifications in the course of work.
Necessary tools and materials
Before you set about creating a peony from beads, you will need to prepare the following materials:
- 100 grams of beads of the chosen color, from which you intend to make a peony;
- 50 grams of green beads for foliage;
- Wire 0.3 mm thick, 0.9 millimeters and 1 millimeter;
- 4 wires for the stem: a length of 40 centimeters, a thickness of 1.2 millimeters. You can use thick wire and not so flexible - they are sold in hardware stores. Suits from the umbrella, as well as spokes from bicycle wheels;
- 3 meters of satin ribbon of green color;
- Tape or green corrugated paper;
- double sided tape.
Some recommendations
If the wire ends on your reel, and you do not have enough on the loop or petal, you can rewind the wire and cut off the coil. And then at this end, to collect the beads.
When you make leaves and petals, then cut off the wire after the set of beads. When you make a bud, then the wire must be cut off immediately and only then you should collect the beads.
If you have a green bead - large, then you will need to make only five arcs. The usual small beads are seven arcs, just like small petals. These leaves will need to make 9 pieces, connecting consistently three together.
Peony from beads: for beginners instruction
For those who doubt their abilities, we recommend using the facilitated technique of the master class. The presented diagram of the pion from beads is simple in execution, despite the capacity of the description.
To begin with, you will need to thread beads onto a wire string about 1 meter long. Then the remaining end of the wire bends in such a way that one edge remains approximately 10 centimeters. After that, 20 beads are to be planted on the short end of the wire, and the main large edge is displaced vertically with the smallest part of it. The first wire must be tied around a small circle, and also make a turn of the bead once. It is necessary to continue so on the ring until you have seven arcs. Then you need to cut the wire, then twist it and cut the loop. Now the remaining edge is closed, measuring about 4 millimeters.
The peony flower has the first leaf. Such petals of beads with seven folds should be 6 pieces. Next, peony petals of 11 arcs are made, they are formed in the same way. They will need to make 14 pieces.
You can make a core: for this you need to thread 40-50 beads on the wire, and lay a loop for the peony. Next, without cutting a metal thread, you should retreat 5 millimeters, to count the beads.
Now make a bud and leaves for the peony. Leaves of beads will be made in the same way as petals: 4 pieces for a bud.
Peony weaving will be carried out with the help of a spinner, beads are put on it. First, string green beads, and then pink or burgundy colors. It will take again to cut off a piece of wire about 50 centimeters long to create a loop. And also to type 10 beads of green color, and then pink color.
Repeat the beadwork, resulting in a petal with 11 bends, which will need to weave four sheets.
Gathering the unfading peony
Peony from beads, the photo of which is presented below, should have leaves of 7 arches with small petals. You should make 9 pieces of leaves, connecting by 3. For the flower sepia, 5 loops are made, for each of them, 30 beads are threaded.
Peonies from beads are ready for the final stage - the mix. To do this, take the metal thread for the stem and from top to bottom, tape with tape and strengthen the middle from the loops of the beads. Then, thin and large petals are screwed along the entire circumference of the pion. All this completes the binding of the sepals. Your flower already has a bud. Then wrap the leg with a shiny ribbon and tape.
During work, one branch of peony leaves is inserted. The same will have to be done with the main flower.
The final stage
It takes a long time to make this decoration. However, if you decide to make a flower or something else, then it's worth starting to learn from simple elements. For example, master the basic principles of weaving a peony from beads. Over time, you will be able to move on to more complex varieties of weaving different colors in vases, as well as trees. Try, experiment and do not despair if something does not work out. Ability comes with experience.
Similar articles
Trending Now