Mink mittens with their own hands

Fur coats from mink practically do not know wear and tear. Carrying such an expensive thing is not one season, every time I want to refresh the image, bringing in it the actual accessories. A stylish, fashionable and irreplaceable in frost thing will be mittens made of mink. In addition, beautiful warm gloves are perfect for beauties, regardless of the type of outerwear you prefer.

A great excuse for needlework

Many girls are fond of needlework and design for themselves fashion accessories, including fantasy and creative thinking. And if the fashionista can not yet rank herself as a needlewoman, then mink fur mink is a great start for mastering the creative path. In addition, the houses in the closet are surely strewn with grandmother's collars or an old hat, hopelessly out of fashion. If you go to a fur studio, then you can certainly stock up on leftovers or fur tails. To the delight of the craftsmen, now there is no shortage of materials.

We make mittens from the mink with our own hands on a knitted fabric

In order to get started, we stock up on all the necessary materials and tools. We will need:

• 16 mink coats of black color.
• Knitted fabric.
• Comb for fur.
• Sharp blade.
• A needle with three faces.
• Pin.

All accessories and materials are ready, now you can start the first stage of sewing. To begin with, the tails are rubbed and combed along the pile. Then carefully cut each with a blade into separate strips. It is necessary to do this slowly and make sure that the size of the strips is the same and the width is exactly 5 mm. Our fur mittens from the mink will be designed by tying them with strips of knitting loops.

Sew the strips to the cuff

We begin the process of tailoring directly. For this we take as a basis thin knitted mittens with large loops. The color of the base can be very diverse, because with black stripes will combine any shades. From the cuff itself, it is necessary to make an indentation, which should not exceed 4 cm. The craftsmen prefer to draw a straight line with a sliced line along the ruler. The tip of each strip is sewn neatly to the beginning of the drawn line so that there are no gaps between the parts. It is not necessary to say that the fur side should look outward. This is understandable to everyone. After the whole cuff is sewn with the prepared strips, you can proceed to the next stage of needlework.

Mittens from the mink with their own hands: the method of strapping

Now it is the turn of the most interesting and fascinating process - passing the strips into a knitted fabric. We pick up a pin and fasten it to the not sewn end of any fur strip. Then we begin to thread the pin through the loops through one, thus, as if tying the workpiece with fur. After reaching the end of the row, remove the pin, remove the excess and sew the tip to the top of the mittens. And so the tying method will work row by row until it covers the entire area of the gloves. It will only bind the thumb, as well as the cuff, but across the product.

The final stage

When we sewed strips, fur hairs could be hidden inside the product or mended. Now you need to take a needle and use it to gently pull the villi out, then use the frequent comb to give the mitten an additional fluffiness. Knitted mittens made of mink will look great, if they are additionally decorated with brushes, patterns or beads. The same way they do with the second mitten. When the work is completed, we can safely say that such a pair will not be found in anyone in the district. And how much pride the fashionista will have, if she dared to do it for the first time.

Mittens based on technical drawing

Another way to sew mittens from a mink is to make a product based on a pattern. This method is suitable for those who have a solid fur detail, for example back or collar. A ready-made pattern can be found in the magazine for needlework, and you can also build it yourself. To do this, you must put a palm to the paper and outline it. 5-7 cm is usually added to the cuff. Now the palm is drawn on paper and transferred to the cardboard, increasing the edges by 1.5 cm.

A pattern of mink mittens provides a gap for the thumb that is left on one of the parts. It is carried out as follows. Perpendicular segments (4 and 5 cm) are drawn through the points 1 cm above the wrist and 1 cm from the edge of the future glove. The resulting segments must intersect at a point approximately in the middle. It will be the center of the future hole provided for the thumb. And the ends of the segments themselves are connected by smooth lines to the oval. Separately, by applying the method to the sheet, observing the allowance (0.5 cm), a thumb drawing is executed.

Open the skin

A pattern of mittens from the mink is applied to the skin of the skin and surrounded by a bright felt-tip pen. It is necessary to take into account the location of the pile and even before cutting, make sure that the hairs are located in the direction of the wrist. Cutting is done with a blade or with a small sharp knife, the pile is neatly moved apart.

Staple phase

The edges are sewn by hand with a stitch. Use also a seam over the edge. Mink mink fur mitts do not require the master to perfect furrier training, however neatness and stitch accuracy will not hurt anyone. It is better if the stitches are as close to each other as possible. When the sewing phase of the parts is completed, the mittens are turned upside down, and the oblique bake is sewn to the edge . A pattern of mink mittens will serve the master again to make the lining. It can be made of fine knitwear, flannel or cotton fabric. The edges of the lining can be stitched both manually and on a sewing machine. The prepared lining is not turned out so that the seams are not in contact with the fingers. It remains only to insert the sewn lining details in the fur, putting them on hand. The mink mittens are ready!

Fur gloves with curved edges and hinges

The initial stage of making mittens with folded cuffs practically does not differ from the previous method. The shape of the gloves is transferred to the cardboard. She is led from the wrong side of the fur, cut out, using a blade. The lining is cut out immediately, but stitched separately from the mittens. The parts are swept by folding them together, facing each other. True, the line on the lining details produced, retreating a half-centimeter from the edge. This is done so that the lining is not collected inside the glove. To make beautiful mittens from the mink, as a finishing piece you will need a ribbon. Proceed as follows. Cut the tape into 8-12 small pieces, not more than 3.5 cm long. The wrists of the fur details are turned out, and at the same distance from each other are sewn loops from pieces of tape, and directly on the fur. The same number of pieces are taken for the second glove. Loops are easy to make. To do this, the ends of the piece overlap.

The edges and fur, and lining cuffs are folded inwards and sewn by hand or on a sewing machine. If you use the latter for processing, you need to know that not every device can cope with fur details by forces. A floating shuttle on the machine indicates the possibility of sewing exceptionally thin fabrics. In this case, in order to avoid breakage, it is better not to test fate and stitch the parts manually. Then the mittens are turned inside out, the lining is put on top, a line is laid along the entire perimeter of the product. It remains to turn the product out and put a decorative braid in the loops. Well, a pattern of mittens from mink fur can be needed even if the girlfriend or sister appreciates the works of the master.

About the benefits of fur mittens

Winters in many Russian regions are distinguished by their severity. Especially outside the central region. Women like to warm their hands in fur garments. Not for nothing since the beginning of time were the couplings in fashion. And, it seems, fashion for fur products will never go away, experiencing more and more new bursts. From a purely aesthetic point of view, fur looks impressive, and from a practical point of view - a warm accessory brings a lot of benefits. No beauty will agree to walk with weather-beaten skin of hands, but only warm fur gloves are able to save from seasonal troubles. In fur salons for sure there is an extensive choice of accessories so beloved by young ladies. But sometimes the prices seem too high. And at home the skin of a small animal or an old fur waistcoat, which in some places lost its marketable appearance, accidentally lay around. So why not do needlework and not make cute exclusive gloves?