Laying the floorboard on glue

To date, there are many options and types of flooring, from natural stone to ceramic tiles. But none of the existing type of coating today can be compared with natural wood. Flooring from the floorboard - this is the most common option of finishing for a private house, and at the same time the best.

But do not forget that the installation of the floorboard requires certain skills and knowledge. Therefore, it is best to entrust this work to professionals. But if you are confident in your abilities, you can start working independently. Before that you need to familiarize yourself with all the intricacies and features of stacking boards, because in order to make repairs by all rules, you need to know in detail about what and how to do. In this article we will tell you how the laying of the floorboard is done correctly .

What needs to be done before the repair?

Before starting to work, you need to do so-called acclimatization of boards, that is, for two or three days to keep them in the place where they will continue to fit.

What are the nuances?

Do not forget that the natural board is very demanding to the humidity of the air. To ensure that your floor is not further deformed, make sure that the humidity is at least 10 and not more than 15 percent. Otherwise, after a few days you will get a hunchbacked floor with a bunch of bends.

What is the laying of the floorboard?

Such a floor can fit into different types of grounds, among which are the following:

• Lag on the screed;
• Bearing structures made of wood;
• Already existing wood floor;
• Laying on concrete floors;
• Laying the board on the glue.

Laying the floorboard on glue

At the moment, this mounting technology is increasingly popular. It practically does not differ from the technology of parquet laying. The only difference is the additional fixation of the floorboards with the help of self-tapping screws. This technology, unlike all the others, allows you to save as much space as possible in the room, namely, height. For those who have a house with low ceilings, laying on glue is just a salvation.

What is important to consider?

When installing the floorboard, pay special attention to whether it has a flat surface. The slightest defects should be eliminated immediately. Also, when installing, use a special waterproofing, otherwise the entire floor will simply swell and be completely ugly. Take care of buying special fluids against the effects of moisture and fungus.

Laying of the floorboard - choice of glue

Getting to repair, it is important not only to prepare the floorboard, but also to choose the right glue. Planks up to 0.5 meters long can be glued with any glue, be it polyurethane, dispersed or epoxy. But if your board consists of beech or other expensive materials, it is recommended to refrain from using dispersed glue. In cases where it is necessary to glue planks longer than 50 centimeters, it is better to use synthetic resin, as well as two-component epoxy-polyurethane fluids.