Laminate Tarket. Stacking

Professionals have always stated about the simplicity of working with Tarket laminate. That is why it enjoys wide popularity among the population of our country. This brand has been present on the international market for several years, however, in such a short time, only a small number of complaints have been received.

Laminate Tarket. Preparing for laying

When it comes to any construction work, it is impossible to perform it without a professional tool, including in this case. So, we need the following supporting materials:

• Sound absorbing substrate 3mm thick.

• Waterproofing film.

• Electric jigsaw.

• Pencil, square.

• Spacing wedges.

Material preparation

Of course, in addition to working tools, you should also take care of the material itself. Acquired Tarket laminate should be kept for two days in a room where the temperature is above 18 degrees, and the humidity varies from 30 to 60 percent. Packaging material is recommended to place horizontally one tier.

Substrate preparation

• Most often, the preparation of the base is to dismantle the old coating, and get rid of it literally from everything: starting with the old linoleum and ending with the board. Before direct installation it is recommended to leave a concrete screed. All cracks should be sealed, and the protuberances removed.

• After dismantling the old floor , the alignment of the foundation begins. Experts recommend using self-leveling solutions.

• If the laminate is laid on a wooden base, emphasis should be placed on the diagnosis of its condition. Rotten boards are dismantled, weak material is strengthened or completely replaced.

• To increase the overall stiffness of the future floor, it is recommended to pre-lay plywood with a thickness of no more than 15 mm. It is important to note that in this case, when walking or other mechanical effects, plywood should not bend, creak or deform. To avoid the subsequent appearance of mold, it is possible to treat the material with a special antifungal solution.

Tarnished laminate flooring

First of all, it is necessary to put a special waterproofing film. Then comes a layer of noise insulation. Depending on your preference, you can choose a cardboard, cork or polymer version. If the manufacturer on the boxes with the material indicated that a layer of noise insulation has already been applied to the laminate, it is not necessary to put it further.

The Tarket laminate is laid exclusively in a floating way, that is, without the use of additional fixation with the floor. The direction of the strips is recommended to choose along the longest wall in the room or from the window. The mounting of each bar must be accompanied by a characteristic click. Between the canvas and the wall there should always be a gap of about 10mm, which is fixed by special expansion wedges. At the final stage, they are removed, mounted skirting, which are attached directly to the wall itself.

Laminate Tarket. Care

Floor cleaning should only be done using a moderate amount of water. It is strictly forbidden to use cleaning agents with so-called abrasive particles. To avoid the appearance of divorces, experts recommend using special gels and pastes, which are sold in stores. Tarket laminate in this case for a long time will retain its shine and pristine quality.