Economical electric heater in the form of a picture

The wall-mounted electric heater in the form of a picture can become not only a compact solution for creating a comfortable indoor microclimate, but also an interior decoration.

Why choose a wall-mounted heater

As the main advantages of this solution can be distinguished safety of operation and simplicity. For such structures, there is no need to look for fuel, it will be sufficient to turn the device into an electric grid, and the air temperature will increase in a short time.

Main types of electric wall heaters

A wall-mounted electric heater in the form of a picture may have different design features. Modern technologies have made it possible to produce such devices light and compact. Placing on the wall is a practical solution in the matter of space saving, as well as a safe approach, while eliminating the possibility of a drop in the device, as well as accidental contact with it. The wall-mounted electric heater in the form of a picture can be infrared, oil, ceramic or convection. Each of these models works from an ordinary outlet, and can also be left unattended for a while. On the basis of such heaters, it is possible to organize autonomous full-fledged heating, which does not involve control by a person.

Oil radiators

If you decide to choose a wall-mounted electric heater in the form of a picture, then you can prefer an oil version of it, which is a sealed enclosure. Inside it is a mineral oil and a tubular electric heater. The principle of operation of such equipment is quite simple. It consists in the fact that the oil, which is in a boiling state, heats the metal, and the radiation from it heats the wall and the surrounding air. As a result, heat spreads throughout the room.

Such devices are characterized by a long service life, low cost and quiet operation. The case of the device does not heat up, so it dries no more air than a conventional water radiator. Among the shortcomings can be distinguished very impressive weight, slow heating of the room, as well as problems that can arise when it is necessary to mount on a wall. If the partition is not too strong, fixation may not be possible. Oil heaters of wall type are not recommended to be installed in bathrooms, and also to leave inside summer cottages without operation.

Convection models

Considering wall heaters electric economical, it is worth paying attention to convectors, which are able to ensure a uniform heating of the room. The work of such equipment is based on the heating of cold air, which falls down according to the laws of physics. Such devices provide even heating space, do not burn oxygen by the type of devices, which are called thermal fans.

Features of convection devices

The electric convector has a heating element and a housing. In the latter there are holes for the movement of air masses. Chilled air enters the lower grilles, heats up and exits through the upper blinds, which are located on the front side. The heating element may be tubular, monolithic or needle-shaped. Many manufacturers today began to abandon the last type of heating elements because the heaters are more durable, less heated and allow the equipment to be used in rooms that have a high level of humidity. Monolithic heaters act as part of the body, they are the most effective, silent and durable. Considering the principle of convectors, it can be noted that they are active and passive. The first have a forced fan, which increases efficiency. Almost all convectors are produced using a technology that assumes the presence of a waterproof enclosure. This allows you to operate similar devices in bathrooms, as well as showers. The case heats up to 60 degrees, which completely eliminates burns.

Possibilities of convection heaters of electrical type

If you are considering wall heaters electric economical, then, perhaps, your choice will fall exactly on convectors. However, when purchasing similar equipment for an apartment or villa, it is necessary to take into account that the efficiency of the device will depend on the capacity of the product, and not on the dimensions of the enclosure. If the ceiling height in the room is standard, then per 10 square meters of floor space will require 1 kilowatt of convector power. In addition, it is important to pay attention to other factors.

Among them is a thermostat, which is a device for adjusting the heating temperature. In the latest generation of heaters, electronic thermostats are installed, which allow for the most accurate adjustment of the device. As a very useful addition, the timer also acts, with the help of which it is enough simply to correct the operating time of the equipment. For many consumers, an important anti-freeze function is also an important feature, which operates in an automatic mode, including the device when the critical temperature is reached. This option is very useful for operating the device in homes or in cottages where the owners live only periodically.

It is impossible not to select the function restart, which provides for automatic activation of the device with pre-defined settings. This functionality is triggered when power is cut off. You can not call unnecessary and such an addition as a remote control that allows you to change settings for a short time without leaving your place.

If you are worried about the fact that after a long operation of the device air can lose the necessary humidity, then it is worth choosing devices that are equipped with an air humidifier. If you care about the health of your loved ones, it is recommended to prefer the model of convectors that are supplied with ionizers, this module under the influence of high voltage gives oxygen molecules a negative charge.

Features of ceramic heaters

If you choose a wall-mounted heater for a dacha, you can pay attention to the ceramic variety. In appearance, such equipment may resemble the internal unit of the split system, but the case in this case will be somewhat thinner. The fan heater operates on the principle of forced convection. Air from the room is constantly supplied to the heating element, which has the appearance of a plate consisting of ceramic elements. Passing through small openings, the air heats up without overdrying.

If you decide to purchase a wall-mounted heater for a dacha, and for you it does not matter if the equipment makes noise, then this solution is the most suitable. Wall mounted models have a power regulator, thermostat, remote control, and a display. The latter allows for automatic operation. However, the listed functions can be supplemented with some improvements. As an additional advantage of this heater is that it can be used as an air conditioner in the hot season, including equipment without heating.

Infrared electric heaters

If you choose wall-type electric heaters, the picture will be the best solution, which will harmoniously complement the interior. In addition to the above varieties, it is possible to distinguish infrared devices that operate on the principle of solar radiation. Such heat sources differ from the rest of the heating devices in that they heat the surrounding objects, rather than air. In order to organize an autonomous heating system, such heaters can be located around the entire perimeter of the room, whereas if there is a need to use the device as an additional source of heat, the unit must be installed at the place where you spend the most amount of time during the day.

Characteristics of infrared panels

If you choose wall-type electric heaters, the painting will become a wonderful decoration for any room. Infrared panels are economical and compact, they benefit from comparison with a fan heater and convectors. The operation of such a panel will be invisible, since the equipment does not create noise and air movement, which is not always pleasant. Comfort temperature will be provided by an automatic temperature regulator.

Such a wall-mounted heater, whose reviews are only positive, is made using glass ceramics and metal, which form the basis of the shell. Such equipment looks modern and stylish, which relieves the owners of the hassle that is associated with the fact that the equipment must be hidden for the summer. Wall heaters electric infrared assume the presence of a heating element, which is located inside the housing and has no limitations in terms of operation.

Features of film heaters

Such devices are completely fireproof, they can not cause burns, and the surface does not heat up more than 60 degrees. Such decorative heating can be successfully used in hallways, balconies, bedrooms, as well as in bathrooms. The electric film infrared wall-mounted heater, whose reviews are combined with positive characteristics, is the thinnest on the modern heater market. In the manufacturing process, a carbon fiber is used, the thickness of which is 1.5 millimeters. This heat source is flexible, so if necessary, it can simply be rolled into a tube for transportation or storage. Insignificant weight allows to fasten such devices to any surfaces to which it is possible to carry even doors and thin walls.

Conclusion

Described heat heaters electric wall can hang even an inexperienced master, this will not cause any difficulties and the housewife. The operation of such equipment is not at all more complicated than a conventional household appliance.