Insulation "Ursa": technical characteristics. Insulation "Ursa": reviews

The market of building materials is rich in varieties of insulation, which are used in various areas. One of the most popular is the unique heat insulation insulation "Ursa". The technical characteristics of this material are at the highest level, which makes it possible to use it for the insulation of not only the walls and roofs of buildings, but also for communication systems.

Types of insulation material

The well-known manufacturer offers the consumer a modern high-quality insulation "Ursa". Characteristics, GOST of this material meet all European standards. For the production of products, dolomite, soda, sand and various additives are used, the mixture of which melts at high temperature, then passed through centrifuges. The result is a dense, thin-fiber, heat-insulating material. It is based on staple fiberglass. There are several types of insulation of this brand.

Thermal insulation material "Ursa" XPS is an extruded plate made of expanded polystyrene. This type of insulation does not absorb moisture, is resistant to temperature changes, has strength, good flexibility, resistance to deformation, it is safe for human health.

Heater "Ursa", whose technical characteristics are very good, is used in road construction, with the equipping of runways, as well as for the insulation of flat roofs, facades, cellars, foundations. Its density is up to 40 kg / m ³ . The coefficient of thermal conductivity is 0.34. The material has a high resistance to compression and is capable of withstanding loads of up to 50 tons per m ² . Its insulation efficiency keeps in the temperature range from -50 to + 75 ° C.

Mineral glass fiber insulation "Ursa" line of GEO consists of plastic long fibers and air formed between them. The coefficient of thermal conductivity of this material is 0.044 W / mK. The product can be used for a long time. Its quality does not change at the same time.

It is known that for the equipment of partitions in the house a noise absorbing noise "Ursa" is often used. Technical characteristics of the material are different in that when heated, it does not release harmful substances. The brands of the URSA Geo nomenclature belong to the NG group of flammability, and G1 have foil mats M-11F and M-25F, Geo plates "Facade" and P-60. The service life is more than 50 years.

Mineral insulation TERRA is used for exterior frame buildings, partitions, ceilings. It has good moisture resistance, increased elasticity. The "Ursa" insulation, whose characteristics are excellent, provides excellent sound insulation, absorbing various noises and increasing acoustics. The material is elastic, snug against uneven surfaces. The insulation has a fire safety class KM0, the flammability group is NG, the thermal conductivity is 0.037 W / mK. It can be used at temperatures from -60 to +220 ºС.

Mineral heat insulator Pure One - is a heater "Ursa", technical characteristics, density and environmental friendliness of which allow it to be used in homes, hospitals, kindergartens. It differs from other materials by production technology. The binding agent is acrylic, due to which less dust is released. Consists of 95% of natural components. By its softness it is not inferior to cotton wool.

Product Marking

The "Ursa" insulation is produced in several configurations, each of which has a certain marking. The letter "M" indicates that this product is produced in mats, "P" - in plates, "F" - covered with a layer of aluminum foil. The letter "C" means that the surface is pasted with fiberglass. Numbers from 11 to 60 are used to determine the density of the material.

Dimensions

For insulation of the roof, external walls, partitions and other structures use a tile insulation "Ursa", which has standard dimensions of 1.25x0.6x0.1 m or 1.25x0.6x0.05 m. In one package, depending on the density, there are 10 to 30 pieces.

Thermal insulation material in the form of mats has such dimensions: 10х1,2х0,1 m or 10х1,2х0,05 m. One roll can consist of two canvases. The small dimensions of the package, as noted in the reviews, simplify the transportation of the product, and also allow the use of material with minimal waste.

Application area

One of the best thermal insulation materials is the "Ursa" heater. Characteristics - lightness, flexibility, durability, high fire-prevention and environmental properties - allow convenient and simple use of it for the insulation of pitched and flat roofs, floors and ceilings, sandwich panel coverings, floor joists, framed partition walls, facades, socles. Due to its versatility, it is also used for heat insulation of pipelines, sound insulation of air ducts, heat and sound insulation of equipment and installations for industrial purposes. Products covered with foil are used for warming saunas and baths.

Advantages of insulation URSA

The entire line of insulated heaters has such advantages:

• Lightness and strength;
• Simple installation;
• Elasticity and elasticity;
• Resistance to moisture and chemical reagents;
• Fire resistance;
• Ecological compatibility;
• Price accessibility.

Thanks to the qualities described above, the material is popular among consumers.

Secrets of the right choice

The main criterion for the acquisition of any building material is its operational life. This applies to heaters. When choosing a thermal insulation material, the following characteristics should be considered:

• The coefficient of thermal conductivity should not be higher than 0.04 W / m ° C,
• strength;
• water resistance;
• Fire safety;
• Ecological compatibility;
• Hygienic;
• Frost resistance;
• Ability to maintain a geometric shape;
• Absence of hygroscopicity.

Heater "Ursa", the technical characteristics of which meet all these criteria, can be safely purchased and used for insulation of buildings. The main thing is to choose the right variety.

Considering all kinds of materials, their positive and negative qualities, most builders choose a "Ursa" heater. Technical characteristics (reviews about them are just excellent) the products are quite high. This material practically does not emit dust, which is especially important when working in enclosed spaces. Heat insulation does not change its properties for a long period of operation. The universality of the material, environmental friendliness, ease of use contribute to the popularity of products in the construction market.