Installation of Geberit: installation features and feedback

Probably, every owner wants to see his home not only beautiful and cozy, but also original. Fortunately, now there are a lot of ideas and materials that will make it possible to realize their desires. The industry has made significant progress in the manufacture of plumbing fixtures. For example, the installation of Geberit, which is made in Switzerland, will make your bathroom (bathroom) interesting and attractive.

What is the product?

This is a metal frame made of frames, which is intended for fixing a hanging toilet, bidet, washbasin, as well as other items of sanitary ware. To this design, all necessary communications are supplied. The drain tank is also fixed on the frame. With the help of pins, you can install a hanging toilet or bidet. It will look very original and beautiful.

Installation Geberit allows you to hide most of the design, make the interior more accurate and original. The frame itself is fixed in an upright position on a plasterboard wall or a wall.

Advantages of the product

Installation Geberit has the following advantages:

• Provides a good saving of useful space in the room.
• Very fast and easy going.
• Provides to change the layout of the room.
• Provides an opportunity to hide flaws in the finish.
• You do not have to worry that the installation of Geberit will ever fall. It is very securely attached.
• Very good appearance of the product.
• Easy maintenance and repair is provided.
• You get a reliable design, which eliminates the risk of leakage.
• In a specialized store you can buy a complete set of products, together with fasteners and gaskets.
• The manufacturer guarantees trouble-free operation of the system for 10 years.

Types of frames

Geberit installation systems can be classified as:

1. Block. These structures are designed for installation on thin partitions, plasterboard walls.
2. Framed. In this case, the system is screwed tightly to the main or bearing wall.
3. Universal. Here the name speaks for itself.

Technical features of the product

Suspended installation Geberit has these parameters:

• It is possible to increase the section of the profile, which makes it easy to mount the structure in plasterboard partitions.
• The availability of an economical drain allows you to reduce the rate of use of water. The button consists of two parts. In addition, there are models that have the ability to limit drainage by pressing the button again. If this is not done, then the entire volume of water will be used up.

The cost of the equipment presented ranges from $ 200 to $ 300. It is, of course, difficult to call it cheap. But during operation, the design quickly pays off.

What tools will be needed for installation?

Installation of the Geberit installation can be done by yourself. For this you need to collect all the necessary devices:

1. Building level.
2. The installation system itself .
3. Roulette and plumb line.
4. Marker for marking.
5. Nakidnye keys. They should have the same diameter as u and fasteners.
6. Drills for concrete and perforator

Features of installation of frame construction

The Geberit toilet seat for the frame installation can be mounted by hand. Before this, you should determine the place of installation of the structure. Pay attention to the thickness of the wall or partition, to which the frame will be screwed. The type of installation depends on this. In addition, we should not forget about the features of sewerage.

For proper installation, it is necessary to perform the following operations:

• Arrangement of the frame. First, assemble a metal frame on which movable fasteners will be installed. It is on them that they fix the drain tank. Thanks to the floating fastenings, you can set the necessary height of the plumbing. Frames can withstand weight, which is half a ton.
• Mounting the reservoir. In this case, take into account such parameters: the drain button should be at a height of 1 meter from the floor; Between the tank and the wall you need to provide a small distance (1.5 cm).
• Fastening of the assembled installation to the wall. In this case, a building level is required . To start, the frame needs to be attached to the wall and mark the places where the fixing holes will be scrolled.
• Piping the pipeline to the tank. Here it is necessary to take into account the direction: top or side. When connecting the tank, do not use flexible hoses, as they can quickly fail. For this purpose, plastic pipes are used.
• Connecting the structure to the sewer. In this case, corrugation is used.
• System check. Before the frame is closed, all connections should be checked for leaks. If they are not, you can proceed to install the plasterboard box. The frame for it is made of metal. Please note that in this case it is better to use a moisture-resistant drywall. Especially if the bathroom and bath are located in the same room. The desired thickness of the sheets is 1 cm. You can put it in 2 layers, but the seams should not coincide. Before screwing the sheets in them, you need to cut all the necessary holes.
• Installation of the bowl of the toilet bowl. However, it should be done no earlier than one and a half weeks after the installation of the box. The Geberit toilet seat is mounted on pins.

The lining of the box can be made before the installation of the bowl or after carrying out this procedure.

How to mount a block installation correctly?

Installation of the Geberit installation does not take much time. The block structure is mounted like this:

1. First mark the installation site. Note that the axis of the room and the axis of the structure must match.
2. Measure the required height, which will accommodate the tank. Often this parameter does not exceed 1 m. The dowels must be screwed at an equal distance from the axis. Holes should be made with a puncher, after which the plugs are jammed into them.
3. Installing the reservoir.
4. Installation of pins, which will fit the toilet. Next, the bowl should be connected to the sink. The hose in this case is secured with clamps.

What problems can arise?

If you want to purchase such a design as the installation of Geberit, the kit can be found in a certified or branded store. Do not look for these products in the markets or prefer discounted models, because in this case you can easily be deceived.

If you have already purchased the product, you can mount it yourself. However, for this you need to have some installation skills. If you are afraid to install the frame yourself, it is better to use the services of plumber masters. With self-installation, you may encounter such problems:

• Leakage toilet. The problem here is that the joints can be poorly treated with a sealant. The cleaning of seams and the reuse of silicone can eliminate the problem.
• Leakage tank leakage. Check that the gaskets are properly seated.
• Stagnant water in the sewer. In this case, the slope of the pipes, which should be 45 degrees, is incorrectly observed.
• Toilet bowl. In this case, the problem is solved simply: tighten the fasteners.

In principle, if compliance with the installation rules, these problems can be avoided. Installation while decorating your interior and will serve regularly for a long time. Good luck!