How to use gel-lacquers: a few simple tips

Every woman wants to always remain beautiful. Fortunately, today there is a lot of different means for this. One of them is gel-lacquer. What is it, how to use this coverage and what mistakes should be avoided - I want to tell about all this.

Benefits

Before you understand the technology of applying gel-varnishes, it is worth to understand what kind of a tool this is and what are the advantages of this coating for nails. So, first of all it is necessary to say that the gel-varnishes, unlike the gel coating, do not harm the nails at all, but they have excellent durability. As for the concept itself, it is often referred to as "shellac" among women. This is the same as gel-lacquer, and Shellac is the most famous, widespread manufacturer. As for the strengths of this method of coating the nails, it is first and foremost excellent durability. Gel-lacquer on the nails lasts a minimum of two weeks and up to a month, also the coating does not chip off with daily hands, it is applied for a relatively long time, but quite simply. Also a plus is the fact that the nails are covered in the same way as with the usual varnish, thinly and in only one or two layers. There is no need to cut down the coating or simulate it with grinding nail files and other sophisticated tools.

Preparation

So, understanding how to apply the lacquer gel, it is worth remembering that pre-nails should be prepared.

1. It is necessary to do a manicure, i.e., to remove the cuticle and the sub-cuticle.
2. Need to give the necessary shape to the nails with a nail file.
3. Nails must necessarily be degreased (this can be done with a conventional wash), treated with a dihydrator.

And only after these procedures you can start working directly with the gel-varnish.

Procedure

So, how to use gel-varnishes correctly, so that the manicure is successful and at the same time pleased the hostess's eyes for a long time?

1. After the complete cleaning of the nail platinum, the primer must be applied (it is necessary for good adhesion of the nail and gel-varnish, and also as an insurer from the layers in the future).
2. Only now you can apply gel-lacquer. It is done by a thin layer, neatly over the entire width and length of the nail plate.
3. Drying. For this stage, you need a UV lamp. Before buying it, you need to check with the manufacturer how long it takes to dry the gel-lacquer. Important is the fact that this time can vary. Do not underdry or overdo the nails in the lamp, so the manicure does not work out (it may crack or bubble).
4. We learn further how to use gel-lacquers. At this stage, you need to completely dry the nail. To do this, you can use a lint-free napkin or brush.
5. Important is the fact that the coating is better applied a couple of times for the brightness of the color. After each staining, everything is dried with a lamp and napkins.
6. Finally came the last stage - applying a fixer. The nail should also be covered thinly, everything is dried again in a UV lamp.

That's all, an excellent manicure for quite a long time is ready!

Rules for storing varnishes

It is worth remembering that for different characteristics, gel-varnish differs: colors, producers. So, do not rush to a cheap product, often it can be just a fake, under the guise of which the buyer will get a regular nail polish. It will also be important that, since the gel-lacquer is worn for a long time, it is often not used all the time. To extend the period of its storage, you need to remember two simple rules:

1. It is necessary to close the lids very tightly so that air does not get inside the jar.
2. Do not keep cans of varnish near the UV lamp, its rays also act through the glass on the very structure of the varnish, destroying it.

Errors

Understanding how to use gel-lacquers, it is worth remembering that you should avoid common mistakes that admit unskilled craftsmen. What are these nuances?

1. You can not skip a single item from the process, because they are very important and necessary.
2. All layers of the coating must be applied thinly.
3. Especially neat gel-varnish should be applied in the cuticle zone and around the edges. Do not cover the skin, otherwise the lacquer will quickly break away and the manicure will be spoiled. Remains of varnish should be cleaned with an orange stick or a tool for working with the cuticle.
4. Do not remove the sticky layer after drying the nail in the lamp (the exception is the last step).
5. To remove the sticky effect that can remain after the finish coat, you can use a special liquid called Cleanser, or you can do it with a conventional wash, but without acetone.
6. And the last rather important advice on how to use gel-varnishes: in order to increase the period of wearing the coating, you need to apply varnish and the end of the nail.
7. The same applies to the finish coat, it is also applied to the entire nail and always around the edges. This will extend the period of manicure socks and will not allow the color to wash.