How to upholster the door with dermantinom: a master class

Of course, today, if the front door has lost its former attractiveness, the issue can be solved radically - just replace it. Fortunately, the days have passed when this procedure was really a problem due to a total deficit of absolutely everything. But ... Firstly, not everyone wants to part with their sound, if already withered and skipping all the sounds and smells of the door. Secondly, not everyone can afford to install a new one. What to do in this case? To breathe in her the second life - to envelop the door with dermantinom! With your own hands or invite a specialist. True, the first option is preferable at least because it will allow you to save a fairly substantial amount. And this, you must agree, is a weighty argument. So, arm yourself with materials, tools and knowledge about how to upholster the door with dermantin. And do not be scared. Even if you held a hammer only a couple of times in your life, it will work out! The process is very simple, you will not have any difficulties.

So, we begin. We offer you a master class on the topic: "How to upholster the door with dermantin". Study, and then with full confidence in their abilities, proceed to work.

All about dermantine

But first you need to say a few words about the most upholstery material, which, by the way, is updated doors for a long time. It is considered a kind of artificial leather, but it is a more budgetary version of it. The wrong side of it is cotton fabric, and the front side is a layer of nitrocellulose.

If we talk about its performance characteristics, it should be noted that dermantin has strength, durability, ease of care, more than affordable value. In addition, there is such a variety of colors and textures on sale that if you decide to obtur door with dermantinom yourself, you will not have any problems with the choice. On the contrary, you can choose an interesting version of this material that your front door will look no worse, if not better, expensive, made to order neighborly.

What will you need?

With the upholstery sorted out. But since it is necessary to upholster the door with dermantinom using a heater - a special lining material, then you need to stock up on them. Usually, for these purposes, use either foam rubber or a special batting. With regard to the amount of necessary material, both the insulation and dermantin should be bought according to the size of your door (taking into account the allowances for seams - ten to twelve centimeters on each side).

Also you will need furniture nails. They are usually produced with metal hats, which can be made in a different range and are stylized for silver, gold or bronze. If desired, you can find and carnations, in which the caps are upholstered with dermantinom. Still need to purchase metal corners (four pieces), PVA glue.

How to upholster the door with dermantinom without a tool? No way! Therefore, stock up with a screwdriver, a screwdriver, a hammer, a stapler and scissors. You can start.

Preparatory stage

The door, of course, will have to be removed from the hinges. Then remove from it - if any - all the old upholstery. In the process, get rid of everything that can hamper the upgrade process: remove the lock, remove the eye, loops. If there are any defects on the door leaf - eliminate them. When the surface is fully prepared, you can go to the main stage.

How to upholster the door with dermantinom

Free in the room or hallway space, put two stools, put a door on them. Screw in the corners of the metal corners. They will make your design more solid. Cut out the heater in accordance with the size of the door, spread the door leaf with glue and glue the foam rubber or batting. In order not to wait until the glue dries, grab the material in several places with a stapler. Then put a piece of dermantin on the insulation, and so that on each side there are the same allowances for the seams. And then turn the edges inside, under the heater, forming a small roller and at the same time nailing them with nails. The algorithm of actions: we begin with the upper edge, then fix the left and right sides, the bottom - at the very end. When fixing the roller, be sure that its thickness is uniform. And be sure to drive the studs at the same distance from each other, otherwise your door is unlikely to have a neat appearance.

Here, perhaps, that's all. On this master class "How to encircle a wooden door with dermantinom" can be considered complete. But nevertheless it is necessary to mention one small detail, thanks to which the entrance door to your apartment will become really exclusive.

Decorative finishings

To decorate the surface of the renovated door, you can use a special braid or cords. Of these, in the center or on the entire surface is laid out a picture, and then in the right places fixed with carnations. And "depict" you can do whatever your heart desires: a grid, vignettes, rhombuses. This is how fantasy will tell you.

Now, that's really all. It is possible not only with a clear conscience to teach everyone how to properly envelop the door with dermantinom, but also to demonstrate the result.