How to build wooden stairs on the second floor with your own hands

Often, modern country houses are very high, so you need wooden stairs to the second floor, your own hands that do not too difficult. They will allow you to make transitions between floors. Such stairs are made of a variety of materials, but the most used, of course, wood. With the help of it, the design can become an intricate decoration of the interior of the house. The price of such a ladder fully depends on the material, the constructive solution and, of course, the capabilities of the manufacturer.

Selection of material for construction

The material from which wooden staircases are made to the second floor with their own hands can be anything. However, for supporting structural elements it is necessary to choose a hardwood that can withstand possible loads. For example, steps made from pine will not equalize in strength with oak. But do not assume that such a ladder will certainly look poor and will crumble at the first load. Existing technologies together with modern paint and varnish coatings can make a true piece of art from pine, and hard varnish for parquet will strengthen the potential of the product for everyday use. Made wooden stairs to the second floor with their own hands made of pine are quite sensitive, for example, to shoes with high heels. Since they will leave dents on the steps.

Begin Creation

So, how to build a ladder to the second floor with your own hands? It is necessary to begin with calculations and measurements. Dimensions depend solely on the height of the floor, the thickness of the floor and the structure of the ladder, which can be straight, rotary or screw. By making the design of the stairs to the second floor, you will greatly facilitate your further work.

Select the height of the steps should be based on the fact that each of them should be not less than 16 cm, but not more than 20. The slope of the staircase should be about 40 degrees, since with a smaller slope it will turn out to be cumbersome, and with more it will be difficult enough to climb . If you want, you can take a ready-made project, in which it will be possible to make your changes. In this case, it is better to bring in those that are visible, and leave the supporting elements unchanged.

Selection of basic dimensions

After creating a drawing or drawing of the stairs, you should start making its elements. The vast majority of stairs is a single-march design. Power rails for it can be made from bars measuring 150 x 100 mm, and for steps use boards, the thickness of which is 30 or 40 mm. Take a better dry, well-cut material, without knots. To timber for the handrail can be made less strict requirements, but do not forget that they should look presentable. After all, they attract the most attention.

Finishing

Installation of the manufactured parts and general assembly of the ladder should be started only after it has been painted and varnished. The parts are joined by means of glue or screws. In addition, further details can be strengthened by a wedge between them. Now you know how to create wooden stairs to the second floor with your own hands.