How to sew a curtain tape with your own conventions

Today, it is already impossible to imagine a modern curtain without folds, which are created by pulling the laces with curtain tape. The gathered curtains or tulle add an elegant touch to the interior of our rooms. Even the simplest and most common matter can become aristocratic with magnificently folded folds. How to sew the blind tape correctly? This question is asked by many women who like to create a cozy nest in their home. I suggest to needlewomen to try to figure out how to sew a curtain tape to a tulle or a dense fabric on their own, because in fact there is nothing complicated in this.

To begin with, we need to pick up and prepare the materials necessary for work: tape, fabric for curtains and thread. Now measure the width of the curtains. The larger the assembly volume, the wider the tape should be. To create the "accordion" we will have enough ribbon width from 4 to 6 centimeters, with two rows of pulling laces.

You must determine the color of the ribbon. It should depend on the type of fabric: opaque and heavy drapes suitable white curtain tape, tulle and organza - kapron.

The length of the braid is determined by the width of the curtain fabric, the bend is always 10 cm. Cut off the necessary footage, not forgetting about the stock.

How to sew a curtain tape of a white cotton cloth? To do this, leave a length of five centimeters more. Pre-steamed, it, as a rule, is adjusted to the required dimensions.

On the main fabric we make a hem from above - about 3 centimeters, it should also be stripped and then swept away. We retreat from the edge of a half-centimeter and take the tape itself or pin it with the pins on the wrong side. To ensure that the tape and curtain material do not slip under the foot of our sewing machine, it is better to make two stitches or slightly tighten the stitches with pins. Try to stick pins along the edge, which will not fall under the presser's foot.

Sew our ribbon, we will be on the front side of the fabric. Stitching stitches, offset stitches or pins are removed. If the tape is wider than 6 centimeters and there are more than two drawstring strings in it, I recommend that you make a spare seam in the middle for reliability and accuracy. If you sew the curtain tape correctly, it is almost invisible.

The final stage - we fold the side and bottom edges of the curtains with their stalling. If the fabric is elastic, when sewing on the machine, do not stretch the fabric, otherwise it will be stretched and sloppy to look. Now turn the edges from the left and right side of the tape to 0.5-1.5 cm with curtain fabric and sew. Stitch gently so that the strings are not stuck. The edges of our thread from the tape should move freely.

We pull the threads up to the necessary width of the folds, and now you can tie the knots around the edges, but not much, not thoroughly. Having hung curtains, we can always tighten or weaken nodules, having corrected the taste of the splendor of the trees.

Beautiful curtains - decoration of the interior and the "eyes" of our room. Do you agree? Therefore, knowing how to sew a curtain tape is really important, because the accuracy of our work will depend on the comfort in the room.

Every housewife, the keeper of a home nest, is always happy to do something with her own hands. Especially if it's not difficult - just like sewing a curtain tape. Sincerely I hope that I was able to help you.