How to make lampshades for the chandelier with your own hands: instructions, technology, recommendations and ideas

In the shops today are presented different lampshades for the chandelier. By their own hands, however, such products can be performed quite simply. As a result, it will be possible to get a very original solution that can not be found in any other interior.

Making a lampshade from cardboard

To perform the work you will need thin white cardboard, glue gun, fishing line or thin twine, a clerical knife that can be replaced with scissors, round pliers, and wire for the frame.

Features of work

Lampshades for the chandelier can be made with their own hands quite simply. To do this, you must prepare all of the above materials and tools. After the master will have to decide on the dimensions of the product. In the example, a diameter of 30 cm will be considered. This indicates that you need to prepare cardboard for the manipulation, whose length is 90 cm.

First you need to make a frame, for which a piece of wire is cut off. The last one should be given a length within 98 cm. From this workpiece, a circle with a diameter of 30 cm should be folded, fixing the ends with the help of round-nosed pliers. Further, from the line or twine, 3 suspension elements are cut. The length of the pieces must be measured taking into account the height at which the luminaire is to be suspended.

Three items prepared in advance should be tied with wire in three places. When fixed, the elements are distributed evenly. If you make shades for the chandelier with your own hands on the described technology, then on the cardboard at the next stage you need to depict butterflies of different sizes, and then cut them. Now the cardboard is rolled up in the form of a cylinder, the joint is pasted with thick paper or stitched with a stapler. The upper part of the plafond should be fixed on the wire. For this it is recommended to use a piece of thin wire or glue.

Final work

When lampshades for the chandelier are made by oneself, it is important to observe the technology of the work. Only in this way you will succeed in achieving a positive result. If the places of joints and cuts were not very aesthetic, then you can decorate them with butterflies. This lamp can be used both in the children's room and in the bedroom. Instead of butterflies, you can cut flowers, snowflakes or stars - in general, everything that comes to your mind.

Back to USSR

If you are thinking about how to make a lamp shade for your own chandelier, you can plunge into the memories of the sixties. In those days, floor lamps were especially popular, they were made in the form of a cylinder. To carry out such work, you will need decorative braid, a crochet hook and scissors. Choosing the first element, you need to combine colors to taste.

Technology of work

Before making a lampshade for the chandelier with your own hands, it is recommended to make a sketch. Then you can start work. To do this, you will need a frame that can be borrowed from an old lamp, to the bottom of which you must attach the first braid. The tail should have a length of 5 cm. The braid should be pulled on the upper ring from the outside, thrown and stretched through the lower ring, or rather, its inner side. These actions should be alternated until the next frame sector begins.

If you make a lampshade with your own hands for a chandelier, then the braid on the next stage should be fixed. Then the tape is of a different color. It should be tied up to the next sector, not forgetting to leave the tail. The third sector is filled in the same way with the help of the remaining braid. Tails should be stretched from below with a crochet hook. On this we can assume that the plafond from the 60's is ready.

Lampshade from fringe and braid

If you decide to make a lampshade with your own hands for a chandelier, then in the process of work you can use and fringe, which will form the basis of a rather interesting idea. Before starting work, it is necessary to prepare two steel hoops or use embroidery hoops. The master will need a fishing line, a glue gun, a braid with a fringe and acrylic paint. It must match the color of the braid. You will need scissors.

Manufacturing procedure

Before you make a lampshade for your lamp yourself, the embroidery frame or the hoops must be painted with acrylic paint. While the composition dries, you need to make 3 marks on the rings, placing them at the same distance from each other. Now you need to cut three pieces of fishing line. They need to be tied to a smaller ring, leaving the upper ends with a margin, so as to tie in the subsequent lamps.

Now the master must determine the length of the fringe, taking 2 cm from it. At the length obtained, you should tie the line to the second end. This will give a cascade. Now comes the turn of the glue-gun, with the help of it will need to make a fixation on the bottom ring. The same manipulations must be made with the upper ring.

It is important to consider that the line can melt under the influence of glue, so it must be applied in such a way that the materials do not interact while the composition remains hot. The glue for this is applied to paper, waiting for a certain time, only after you can start fixing.

Alternative solutions for lampshades

If you want to make a lampshade for a chandelier with your own hands made of fabric, then you can use one of the above technologies. This is particularly true of the latter option, when the fabric is poured on a pre-prepared strip, and then cut so that it can get strips hanging down. However, it is not necessary to start work from scratch, if there is a desire to create a beautiful lampshade. For example, you can use a paper flashlight, complementing it with forms from a chocolate assortment or cupcakes. The latter are glued to the base of the flashlight, which allows you to get a new design of the lampshade.

Conclusion

If you decide to make a lampshade with your own hands for a chandelier of threads, then you can use, again, the above technology. Threads are stitched on a pre-prepared strip, the length of which corresponds to the size of the embroidery frame. Threads can be different in color and length, which allows you to get an unsurpassed effect.

For the work can be used and a paper cover, which is supplemented with pendants. Glass jars can also become a part of a lampshade. For this, they paint with colors, and if possible, they are decorated with engraving. If in one of the rooms in your house the high-tech style is maintained, then you can use tin cans that you do not even have to paint.