How to make a stunning scooter tuning with your own hands?

Scooters attract many people with their positive characteristics. These include small dimensions, low fuel consumption and economy in service. Therefore, sometimes there is a desire not only to move around comfortably, avoiding traffic jams, but also to make tuning of the scooter with your own hands, thus emphasizing your individuality.

Achieve such goals by external alteration of the scooter, using the following tools and materials:

- a set of keys;

- cladding material;

- paint;

- primer;

- putty;

- fishing line;

- wheel disks;

- New optics.

To implement the external tuning of the scooter, which is different from the usual standards, you need:

- set a new sound signal;

- replace the lights;

- polish plastic and metal parts;

- sew the saddle with automotive leather.

To give the scooter an individuality will help you:

- an unusual variant of painting;

- aerography;

- sticker of vinyl tape;

- ultraviolet illumination, etc.

However, it must be remembered that all changes and improvements must be not only beautiful, but also practical. For example, increasing the diameter of the discs affects the performance of the brakes, which are the basis for the safety of each driver. In addition, such tuning of the scooter, made with their own hands, reduces the passability, which is also important. After all, it would be nice for everyone to climb up the mountain.

Doing tuning of the scooter with your own hands, know that not all techniques are useful at the same time. So, it is not advisable to install the windscreen. It increases the strength of airflow resistance and, accordingly, reduces the speed of the scooter.

It is also worth noting anodized fasteners, which reduces the safety of movement. In addition, this "beauty" with time can quickly climb. Therefore, such changes are ineffective and unjustified.

If you want to make tuning of the scooter engine, then it is not necessary to change the cover of the variator to absolutely transparent, made of plastic. The fact is that it eventually becomes covered with dirt and dust. Therefore, you will not achieve the planned transparency, but the stiffness of the entire design break.

Tuning the scooter with your own hands is best to start with plastic. Having unscrewed bolts and fastenings, make external survey of all vehicle. Minor cracks and scratches are sealed or glued with a special compound. You can treat the plastic with sandpaper, then apply a coat of primer and then paint on it. Do not forget to coat the surface with lacquer, giving it extra shine.

Look beautifully on the scooter with new wheels or painted old ones. As with the previous operation, the disk must be cleaned with sandpaper and covered with several layers of soil and paint.

Backlighting is best done with the help of LEDs, because they are often more durable than other lighting fixtures in such operating conditions. Often bulbs are on the headlights, dashboard or wheels. The backlight from the bottom of the entire scooter looks spectacular, it creates a "hover" effect.

But first you need to plan where and how the highlight parts will be placed on the vehicle itself. That is, to develop its design. And then, having already bought the LEDs and connected them in a chain, fix it in a previously planned place.

In general, the tuning of a scooter can make of it a completely unrecognizable machine capable of amazing even those who have seen the heaped-up "devays". Just make a little ingenuity, as well as imagination, and you will definitely get a unique and stunning means of transportation.