How to make a sliding gate from a corrugated board with own hands (drawings)

Now in the building stores you can find a lot of materials used to produce fences and gates. Most often it is wrought iron, wood and metal. But gradually the leadership position begins to occupy such material as profiled, which is preferred by more land owners. This material is galvanized steel in a sheet version with a polymer coating.

What attracts the builders and owners of country houses in the corrugated board? Firstly, it is a very light material, which manifests itself well in operation. Secondly, it is easy to install. We will try to confirm this in practice, having learned how to make a sliding gate from the corrugated board with our own hands (you can see the photo scheme in the article). We will also understand the varieties of it and try to find the best option.

Varieties of gates made of corrugated board. Features of their design, advantages and disadvantages

Consider the positive side of the fences of this material:

• Profiled sheets allow you to save money, because their price is significantly different from forged products or wood.
• Easy assembly and manufacturing of finished parts.
• High service life.
• Gates can be of various designs and managed in many ways due to the functionality of the corrugated board.
• Due to the fact that the corrugated board is produced in different colors, you can choose a color that will fully satisfy the customer's aesthetic requirements and harmonize with any exteriors on the site.

Types of gates made of this material by the way of opening

• Backwards.
• Sweeps.
• Sliding.
• For garages.
• Pivoting and lifting.

The most common types are the sliding gates and the gates of a sweeping view. Below we will discuss both options. Also we will learn how to make sliding gates from the corrugated board with our own hands.

Gates of a sweeping view from the corrugated board

This performance is classical, and many are accustomed to seeing this option on the sites. The design is carried out in the form of two racks, on which are arranged the corrugated door leafs.

Due to the fact that the pillars use bearing loops, smooth opening is achieved. The door or wicket is usually located in the next section of the fence, but there are times when the wicket is mounted in one of the gate sections.

Opening is achieved by exposure manually or automatically, using an automatic electric drive. Most often, the drive is used for access to industrial facilities and other non-domestic destinations, but more recently, automatic control of gates has found application in the construction of private houses. It is worth noting that due to the use of corrugated board in the manufacture of gates, you can save on buying a drive, because the gates are made easier than similar models from other materials, the drive is suitable for small capacity.

Swing gates are of great interest due to the availability of materials and ease of work. However, in cases where there is no place to disclose the sections, this option will have to be swept aside and figured out how to make a sliding gate from the corrugated board with your own hands.

Gates from recycled corrugated board

Such gates are considered more convenient in operation due to their functional characteristics. The thing is that at the opening they drive off to the side, respectively, without occupying a useful space ahead. If the territory does not contribute to the use of swing gates due to lack of free space, this type of fencing will be simply irreplaceable.

Constructively, you can achieve a very wide opening for traffic, because in length such gates reach and ten meters. Using sliding gates in winter, you can not spend a lot of time cleaning the snow thoroughly, because drifts will not prevent the opening of the sash, as happens when opening swing. Also, thanks to the design that eliminates the guides in the opening, you do not have to worry about driving cars of any height. It is worth noting that the use of sliding gates without automation is very inconvenient due to the large size of the sash, so if you are thinking how to make a sliding gate from the corrugated board with your own hands, it is worth considering the moment of buying the drive.

We will highlight the main shortcomings that are present in the sliding gates of such a plan:

• The design of these types of gates involves the use of a strong foundation, which increases material costs.
• Also mandatory use of special components designed to organize the correct operation of the gate.
• Well, finally, the installation of these types of doors is more complicated and, as a consequence, more expensive.

What should I look for when buying a profiled sheet?

First of all, you need to familiarize yourself with the marking and type of coverage. This material can be different in thickness, shape and height of the cells. How tight the future gates will be depends on the size of the ledge on the profiled sheet.

Here are some of the notations used in the title of this material, which will help you figure out how to make a sliding gate from corrugated board:

• C - suitable corrugations for profiled sheeting, small thickness and profile height.
• НС - material of universal type. Suitable for both fences and gates, and for roofing.
• H - a powerful corrugated board, suitable for the construction of hangars and large rooms. As a material for the gate is not applied.
• The numbers in the designation mean the height of the profile.

It should be noted that for the erection of fences and the manufacture of doors use such profiled sheets as C8 and C10, with a height of stiffeners of 8 and 10 mm, respectively. The thickness of the material grade C8 is 0.4 mm, and they weigh about 5 kilograms per square meter. The weight of a square of a sheet of mark С10 is more - about 7 kg due to its greater thickness.

Corrugated board for the gate is not only galvanized, it is also covered with a polymer compound, which prevents material from mechanical damage. As mentioned above, there are a lot of color options, so when you look at the samples in the store, you can understand how the desired version looks alive, and decide whether it will fit into the exterior.

Sliding gates made of corrugated board with own hands

As already noted, the installation of these gates will require a lot of effort. However, everything will be on your shoulder if you understand the design features and understand the way in which the sliding gate is made from the corrugated board with your own hands. The photos and videos of this process will undoubtedly make it even easier.

Preparation. Buying components and drawing up a drawing

We will list the necessary parts. Without them it is impossible to make a sliding gate from the corrugated board with their own hands to the dacha:

• Guide beam. The length should be selected from the following calculation: the width of the opening x 1.6. The thickness will depend on how much the gate weighs.
• Roller carriages in the quantity of two pieces.
• Two catchers, for the top and bottom of the gate.
• A board designed to stabilize the gate when it opens.
• Roller roller, designed to reduce the noise of work.

If it is planned to make sliding gates from the corrugated board with their own hands without a drive, then the following materials should not be purchased:

• Reducer;
• The rack is notched;
• Control device;
• Mounting device;
• Photocells and signal lamp.

It was already noted the need for careful planning, before starting to make sliding gates from the corrugated board with their own hands. The drawings should include the following information:

• The length of the door panel.
• The width of the counterweight.
• The height of the gate.
• The length of all jumpers.

Preparation of foundation and support pillars

First, you need to put in the ground pillars, which will hold our construction. Consider what the pillars are made of:

• channel;
• Steel pipe;
• Oak bar;
• Brick or concrete with the application of mortgages.

Mounting the support post

Digging a depression below the freezing level of groundwater, using a building level, a pole or pipe is exposed. Then all it is necessary to fill in the solution and wait for it to dry.

As for the foundation under the sliding type of the gates, here you will need a channel with a width of up to 200 mm and 14 mm reinforcing bars. First, the "banquet" is done. The bars are cut to the desired length and welded to the channel. After this, it is necessary to dig a depression of the following shape: about 1.5 meters in the column locations, and up to half a meter between the columns. The bottom of the groove should be provided with a sand cushion. In the end, it is necessary to place the "banquet" in the pit and align it. After pouring the foundation must be left for a week to dry.

The frame of the gate

For its production, pipes 60 x 30 mm and 40 x 20 mm will be needed. According to the drawing, it is necessary to cut pipes of the required length, this will help the Bulgarian. After that, they must be cleaned, degreased and dyed. To ensure that the sliding gates from the corrugated board, with their own hands installed in the country, looked best, before painting it is recommended to cover the pipes with soil. First of all, the outer frame is welded together, and then the inner one is welded. Since the profiled sheeting will be fixed to the inner frame, it is necessary to think about the distance between the bridges.

Sheathing of the gates with profiled sheeting

This stage is final, in order to make self-made sliding gates from the corrugated board with their own hands. The following actions are required:

• First you need to install the frame on the hardened foundation.
• On the channel of the banquet table, it is necessary to attach rollers. It is recommended to position them as far as possible from each other, but taking into account the fact that the end roller should not reach the plug when it is closed.
• Next on the rollers you need to put the gate and set them on the level.
• If everything is smooth, you should scoop the trolley platforms.
• Then the hook and catchers are caught.
• It is necessary to check that the roller coincides with the lower catcher and the verticality of the installed frame.
• In the end, it only remains to cover the framework with a profiled sheet. It is best to try to use fasteners evenly. It is worth noting that the corrugated board is best fixed with screws or with the help of rivets. Rivets will look more aesthetic, but if you want to remove a sheet, for example, for a replacement, it will be very difficult. To fix it is necessary only in the grooves of the profile, and the gap between the fastening elements is not recommended to be made too large. All because with strong wind gusts a sheet can break. The optimum option - per square meter of sheet 6 screws.

Conclusion

That's all. We figured out the question of how to make a sliding gate from the corrugated board, now it remains to use and count the money saved. In the end, I would like to note that when choosing a gate to your site, all options should be considered. The information above will help you decide which type of gate is more suitable for you, and which materials are preferable to use.

If the dimensions of your site allow you to place a swing gate on it, then this possibility should not be neglected. After all, the foundation and components will be much cheaper. If it is only possible to use the sliding type of the gate, then it is worth remembering that it is better for it to provide automation. And in other respects this article will help you.

So, we found out how to make a sliding gate from the corrugated board to the dacha.