How to make a pyramid of paper? detailed instructions

Many seek to Egypt to see with their own eyes the pyramids and to touch them. They fascinate the eye and fill the body with some healing energy. Scientists around the world agreed that the pyramids are capable of exerting a therapeutic and magical effect on the body. It is proved that they harmonize energy, structure water, are able to preserve the freshness of foods for a long time, and also rejuvenate people. If you want to change the energy in your home, then some tips on how to make a pyramid of paper yourself will help you. To make such a design, you will need to calculate its proportions and strictly adhere to them during assembly.
To make a pyramid of paper, you will need tight sheets or corrugated cardboard. This is due to the fact that it needs to be made from dielectric materials. First you need to draw isosceles triangles on a sheet of cardboard in the number of four pieces. Remember that the base of each of them will be equal to 460 mm, and the length of the side faces should be 439.5 mm.
So, how to make a pyramid of paper? First, you need to properly lay out the cardboard. Lay the sheet so that the strips of corrugation are not along the drawn triangles, but horizontally, that is, across. This arrangement will give the pyramid design even greater rigidity. Now carefully cut out our triangles using a ruler, and trying to guide the knife so that it is positioned at an angle to the surface of the cardboard.
When you cut the sides of your future pyramid, do not forget to make a small perpendicular incision. Then you need to retreat from the edge of the side edge two-thirds of the thickness of the cardboard and cut through the ruler paper, but already on the inside of the face. Then you need to cut the corner to make a chamfer. Try to get it as flat as possible.
Now retreat 15 mm from the edge of each face from the outside and draw a line with a pencil. So we will designate the boundaries by which we will glue the ribbon connecting the parts of the pyramid. To cut out the connecting tapes, you will need thick paper. They will be 30 mm in width each.

When the tapes are ready, they need to be folded in half and cut one of the edges on each. The cutoff angle is 32 degrees. Next, we apply the tape, without unfolding it, to one edge of the face of your pyramid with a fold line and glue it. Then we take the second half of the tape and glue it to the second face.

The final step in the search for an answer to the question of how to make a pyramid of paper includes the gluing of all the remaining ribbons with faces to unite the details of the pyramid into the overall sweep. It remains only to bend at a right angle faces in those places where there will be connections. Thus, we will make the base of the pyramid in the form of an even square. We glue the extremities of the pyramid. Make sure that the bases of these faces are in the same plane.

The pyramid of paper can be used either hollow, or in the version with a stand. To make it, you need to cut out a two-layer corrugated cardboard square of 490x490 mm. So you learned about how to make a pyramid of paper.