How to make a gun out of wood? Create an excellent gift for your children

The pistol is made of wood ... How many words of childhood memories in this combination ... Memories of how very young boys and girls chased each other, imagining themselves robbers and those who are catching them. Robbers "shoot" from the simplest toys from a simple piece of wood, they become the first pistols, the first toy weapon made by own hands. This article will talk about how to make a gun made of wood.

Make weapons a dream not only for children

If as a child you just took a piece of wood that is suitable in form, then now you can use special tools and make a toy that is almost identical to real weapons. If you perform the gun correctly, it will even be able to shoot. Self-made pistols made of wood can please not only boys, but their fathers.

Let's start to make

For the production of "weapons" you will need: a wooden bar, a piece of rubber bicycle camera, a drill with a drill no more than 6 mm, a well ground knife, saw, file, nazhdachka, knitting needle or the same length of nail. To understand how to make a gun made of wood, it is worthwhile to know that the design of this product is divided into three elements: one-piece handles and trunk, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut from a wooden block . The bar in the thickness should be at least 2 cm. You can choose any shape. The main thing is that you like it and it was convenient. Remains of a bar do not throw out, they will be useful to you.

We continue to answer the question of how to make a gun made of wood. In the finished barrel with a drill, make a hole for the entire length. The completed hole must be carefully sanded with sandpaper. To do this, the paper needs to be rolled into a tube and put on a suitable stick, a long nail and a knitting needle are suitable. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, in diameter a little less than 6 mm. On one part of the piston should be a small thickening. This end will be called a whisper. The piston must be for the entire length of the barrel and freely enter and exit it. On the thickening you need to attach the elastic band. Her or tape should be cut from a piece of bicycle camera. Instead of a wooden rod, you can take just a long nail. His hat will serve as a whisper. The nail itself must be cut along the length of the trunk, and the place of the cutoff should be well sanded with a file to finally blunt it.

The finished piston is placed in the barrel of the pistol, at the same time it is necessary to pull the elastic on the handle of the gun. The sheptalo will need to be adjusted in such a way that when pulling it back, the trigger is raised. Also, it should be done so that it can catch on the ledge on the handle of the gun. At the same time, the piston will be firmly fixed in the cocked state. The pistol is made of wood.

We produce a training volley

Shoot from this design should be in this way: the gun is taken into the hand, the thumb of the hand at the same time pushes the whispering upward, it slides and moves the piston along the trunk. If you do not know how to make a gun out of wood, then this article should help you achieve an excellent result.