How to gum a fish: ways, schemes and feedback. How to weave a fish on a gum machine

Many needlewomen know how to weave bracelets made of rubber bands, but few have created a fish. Such a figure can serve as a charm, a talisman or simply an unusual decoration. In this master class we will try to make a fish on a slingshot. It is quite easy to do this. One figure will need 38 rubber bands.

How to weave a fish on a slingshot

Before weaving the fish from the gum on the slingshot, you need to prepare 37 yellow and 1 green salad (choose any color that you like).

The process of making fish begins with a tail:

1. Take the slingshot and screw on the right side of the 1 yellow rubber band 3 times.
2. Then, put 2 elastic bands on both sides of the slingshot and drop the lower ones into the center.
3. Again, pounce 2 pieces and drop the eyelets from the right and left columns. Throw the rubber bands from the left to the bar on the right side.
4. Now pull the elastic on the bar on the left side, scrolling it in 3 turns.
5. Pull a pair of rubber bands on two bars, but reset the eyelets only from the bar on the left side.
6. Again, pull a pair of rubber bands and drop one pair from each bar. On the next pair - discard all the rubber bands from the posts.

We wove the tail of a fish. How to weave a figurine of fish from the rubber bands on? Now consistently pull 4 pairs of rubber bands:

1. Take 2 yellow, throw on the slingshot and remove both rows under them. Repeat 3 times.
2. Drag the rubber bands from the bar on the left side to the right.
3. Hook the hook into the loop, where the fins join, put on 2 rubber bands, stretch it through it. The edges of the pull on the hook and throw these rubber bands on the column on the left side.
4. Another pounce 2 pairs of rubber bands.
5. On the first two elastic bands, drop all the eyelets from the post on the left side. On the second pair - only the upper 2.

Making the eye of a fish

Now you need a green-colored gum for the eye of a fish:

1. Place the rubber on the bar on the right side and scroll 4 times. Top 2 yellow bands on both posts.
2. Discard all the salad gum, and then 2 gum from the column.
3. Throw the yellow rubber bands on the bar on the right side.
4. Take the end of the hook in the same loop on the tail, put a pair of rubber bands on it, stretch them and wrap them on the column on the left side.
5. Wrap a pair of rubber bands on both posts and drop all the loops from the left.
6. On the second pair, drop 2 loops, repeat with another pair of rubber bands.
7. Put 1 rubber on the machine and reset all the others.
8. Tighten the eyelet. Then it can be hidden.

The fish is ready! Use it to decorate the bracelet or as a key fob.

Goldfish from rubber

Do you want to know how to make a fish similar to gold from rubber bands? It is believed that such a figure is a strong talisman, which can bring good luck to the owner. Let's do it to give luck to yourself and your loved ones.

Before weaving a fish from rubber bands, you need to prepare 8 beige rubber bands, 16 red and 1 black. This is an option, how to weave a fish from rubber bands on a fork. To work also need a hook. Let's get to work:

1. At the first stage, take 1 red rubber band and put it on the column on the right side, scrolling in 3 turns.
2. Then, put on 3 beige gum and discard the lower red loops.
3. Wrap 2 red gum, discard the beige. Again, throw a pair of red and drop the 2 lower ones.
4. Now toss the rubber bands from the bar on the left side to the right and hook in the loop of three red rubber bands that are above the beige. Fit it to the column on the left side.

Making a Fisherman's Eye

1. Take the black rubber band, put it on the bar on the right side, scrolling through 4 turns.
2. Throw a pair of rubbery red, discard the rubber bands from the bar on the left side, the black ones from the post on the left side, another 1 pair of red ones from the right column.
3. Wrap a pair of red rubber bands and drop them all the gums from the bars.

We continue to weave the body of goldfish

Throw the rubber bands from the bar on the left side to the right. Then perform the following steps:

1. Take a pair of rubber bands, consisting of one beige and red. Fit to the column on the left side, scrolling in 2 turns.
2. Fit the same pair, without twisting, discard the rubber bands only from the bar on the left side.
3. Pull the rubber bands from the left to the bar on the right side. Take again a pair of rubber beige and red color, put it on the column on the left side, scrolling in 2 turns.
4. Throw the next pair on both bars, drop the eyelets from the column on the left side.
5. Pull the pair from the bar on the left side to the right.
6. Again, put a pair of gum on the bar on the left side, scrolling in 2 turns. Throw a couple more and drop the rubber from the post on the left side.
7. Now put on 1 red rubber band and drop all the loops from the bars that are below.
8. Remain the remaining rubber band on the hook, removing it from the slingshot, and tighten the knot, holding one loop through the other.
9. Pull out the eyelet on the tail.

This goldfish is so easy to weave.

How to weave a fish from elastic bands on the machine "Monster Teil"

There is another way to create a figurine of rubber bands. You can weave a keychain in the form of a fish on the machine "Monster Teile." For work you will need: a machine, 54 rubber bands of the main color (for example, take yellow) and 2 black eye rubber. If you want to make fins, additionally prepare 4 blue rubber bands. This figure is very fast.

We begin with the tail:

1. Take the machine, put the yellow rubber on the bar on the right side of the bottom row and twist it in 3 turns.
2. Put the second rubber band on the second column next to it, also wrapping it 3 times.
3. Next we will take 2 rubber bands. A pair of rubber bands on the right columns in the upper and lower rows.
4. Wrap 2 gum on two bars in the middle.
5. Take the hook and drop the rubber bands, twisted in 3 turns.
6. Lower the rubber bands lower, put one more time on the pair on two right and two central posts.
7. Lower the layer of rubber bands discard.
8. To make a narrowing on the tail, throw the rubber from the right column to the middle on both sides. Hold the product with your fingers so that it does not come off the machine.

Fish body made of rubber

We continue the master-class, devoted to how to weave a fish from elastic bands on the machine "Monster Teil".

Begin to create the body of the figure:

1. Fold 2 gum on top, discard the lower layers. Should stay on 2 loops on both sides. Lower the gum as low as possible.
2. Wrap 6 gum pairs, making sure that they do not twist and sit on the posts exactly, one above the other.
3. We grab the two lowest rubber bands and drop them from the posts.
4. 2 top gum on the column on the left side, 2 from the next layer - to the right. Turn over the machine and repeat all operations on the other side. On each column should be 2 layers of rubber.
5. Take 1 elastic band of yellow color and cover it horizontally on 3 columns of the bottom row, pull and rotate with the eight. Throw back on these 3 bars. This elastic band will connect all the loops, then there will be no holes on the trunk of the fish.

Fins for fish

If you want to make fish fins, you can take a pair of other rubberies and put them on two bars in the center. At the outer posts, use 2 yellow rubber bands.

1. With the help of the hook, reset the horizontal rubber twisted in two turns first, and after that - all the rubber bands of the lower layer.
2. Again, put the elastic horizontally on the 3 pillars of the front row, but do not turn it around.
3. We continue to make fins, throwing in the center of a pair of rubber bands of blue color.
4. On the last posts again we put 2 yellow gums. Discard first the horizontal rubber band, then - all the loops of the lower layer. Repeat twice, placing yellow rubber bands in the center at the second stage.

Making the eye of a fish

For the eye, take 2 black rubber bands: the first slide on the central column of the bottom row, twisting it 3 times. The same is done on the opposite column.

We continue to weave a fish:

1. Throw 1 yellow rubber on 3 columns of the bottom row. Then - 2 gum on all the stakes in pairs, as they did before.
2. Discard first the horizontal rubber band, then all the yellow ones that are at the bottom. Black until you touch.
3. Now you need to throw off the black rubber bands. Grab 2 loops and remove them. Again, put the elastic horizontally on the 3 post, twisting it with the figure eight. Fit one rubber band for each pair of posts.
4. Discard the horizontal rubber band, then - all the rubber bands of the lower layer.
5. It remains to connect all the rubber bands, throwing all the loops from the outer posts to the central ones. Start with the right column on the front row, then - drag the elastic band on the opposite column to the center. Repeat on the other side.
6. Throw the rubber bands on the two center posts, drop all the gums from the bottom layer.
7. It remains to make a knot, throwing the rubber from the top row of the column down, and lower the reset.
8. Remove the gum from the machine hook. We sip it, tightening the loop.

The fish is ready! Now you know several ways how to weave a fish from rubber bands on a machine or slingshot. Creating this figure is very simple, because you can quickly make a lot of charms or pendants and give them to friends.