How to clean the air conditioner with your own hands

Any equipment is eventually covered with sewage and involves the need for cleaning. The same applies to air conditioners. Their internal parts are absorbed by a thick layer of dust, because of this equipment can overheat, work worse and even fail. For this reason, it is necessary to carry out the cleaning in a timely manner. And you can do without the help of a specialist. The implementation of such works is available to anyone who understands the technique at least a little.

The need to clean the air conditioner

Cleaning the air conditioner with your own hands is quite simple and can be carried out in a short time. However, many home masters are wondering whether it is worth doing such manipulations. Specialists point out the need to carry out these works, however, certain rules must be followed in order for the equipment to function properly afterwards. The only difficulty that can be faced by people who clean up is equipment disassembly. If the described work is not done in a timely manner, it can lead to a deterioration in the sanitary conditions in the room where the device is located, among other things, an unpleasant smell due to the development of bacteria inside the air conditioner. Dust can cause a decline in the quality of the system, cooling air will not be so intense. The efficiency will be reduced because of the dust layer. It is possible to determine the frequency of such work, it will depend on the intensity of the load on the device. Experts advise to clean every 6 months, as for household appliances. If we are talking about the office model, then these manipulations are made every three months. If the system is operating in a restaurant, club or any other public place, then cleaning should be done once a month.

Work on cleaning the indoor unit

If you will clean the air conditioner with your own hands, it is important not to forget about the indoor unit. There is an air filter, which is most often made in the form of a drum or a rectangle. In order to remove this element, in most cases simply remove the cover. It must be remembered that the air conditioner must be de-energized. After the lid is removed, the protective mesh is removed . The latter is designed to protect the filter from damage. At the next stage, you can proceed to the removal of the air filter. It is recommended to wash it under running water. Using a vacuum cleaner, you need to blow, while the body itself is immersed in a basin of water. Cleaning the air conditioner with your own hands involves drying the filter under natural conditions. This is due to the fact that this component of the device contains paper elements that will deform if exposed to them by hot air. Up to the moment of changing this part, about 8 purges can pass. In the process of operation, the throughput will be reduced, the structure will be disrupted, which will negatively affect the operation of the device. The next step will be working with a heat exchanger, which is made in the form of pipes, the last one is the refrigerant. Among other things, flows through it flow through the functioning fan. When manipulating the heat exchanger, special care must be taken. This is necessary in order to prevent damage to internal parts. Use at the same time you need a vacuum cleaner and brushes that have a long nap. This will eliminate all the dust that has accumulated inside. Cleaning the air conditioner by oneself can be done without the use of professional help. However, if you notice the rust on the heat exchanger, then it will not be possible to remove it by yourself, this entails the need to call a specialist. Help is needed in order to adjust the Freon level, the wizard will help to analyze how well the external unit functions.

Purification of the drainage system

If the Dantex air conditioner is cleaned by hand, it may be necessary to work on the drainage system. The necessity of carrying out these works is indicated by the absence of the condensate outlet. This circumstance indicates that the drainage system was clogged. This is due to incorrect installation of the air conditioner. If the hose is sagging or bent, the condensate will not be drained either. Dirt and impurities that form and accumulate in the drainage tray, clog the pipeline. In winter, the liquid freezes, which leads to the formation of an ice cork in the hose.

Drainage cleaning technology

If you clean the air conditioner yourself, the photo will be useful to consider before starting work. It, probably, will allow to understand, what technology of manipulations. In order to clean the drain, it is necessary to rinse the indoor unit with the water pressure. Next, the unit is washed, which was partially disassembled. The drain hose must be thoroughly blown with air, and then the drainage system of the dismantled unit is washed.

Cleaning the car air conditioner

The means for cleaning the air conditioner with your own hands will be absolutely necessary if there is a need to work with the automotive equipment. To use a regular aerosol it is impossible, it will allow only to eliminate an unpleasant smell which is caused by bacteria.

Recommendations of the master

To begin with, it is necessary to dismantle the filter, then the hose with the extension is in use, and the detergent must be introduced through it. The next stage is the recirculation mode, it should be left for 10 minutes. The tube should be installed in the internal space of the duct and direct the jet to the surface of the evaporator. The entire liquid must be worked out, and after about 15 minutes wait. After the liquid has been worked out, it will exit through the drainage hole. Now the air conditioner needs to be turned into recirculation mode. On the fan, you can set the maximum speed. When the LG air conditioner is cleaned by yourself, the next step is to leave the car, closing all the doors and windows. The air conditioner must be operated for 10 minutes. Only so all harmful substances will be eliminated from the device, after they can no longer cause harm to health. The tube can be installed not in the duct, but in the hole from the drainage. From there, too, waste liquid can flow out. Now you know how to clean the drainage system of the air conditioner with your own hands. It will only be necessary to change the old filter in time, this will allow to prolong the life of the equipment.

Deep Cleansing

In order to perform a more thorough cleaning, it is necessary to remove the capacitor, which is done by unscrewing the fasteners. The radiator must be treated with a substance that can exclude the presence of insects. In this state, the element should be left for 15 minutes. Further, the water is directed to the condenser under a strong head, this will help to wash the product off the surface. There is another method of cleaning, which involves the use of foam. If you clean the air conditioner "Panasonic" with your own hands, for this technology you can clean the evaporator. The foam for this purpose must be fed into the evaporation unit through the drain hole, which is located at the bottom of the car. You can use the air duct for this, which goes directly to the interior. Foam will turn into a liquid that will automatically leave the device.

Features of cleaning with foam

The hose must be installed in the hole from the drainage until it rests against the evaporator grille. Then the balloon with foam strengthens to the end of the hose, but before that it should be shaken well. When the container is held in a vertical position, foam should be supplied. The master should wait 20 minutes, during this period the foam will turn into liquid. Only after this, the air conditioner can be put into operation. The air flow should be directed to the face or feet, the flap must be in the closed state. The fan needs to be set to maximum power. The car closes, the device works for 10 minutes.

Conclusion

Now you know how to clean the window air conditioner with your own hands. Such manipulations you can easily do yourself. However, before starting work, make sure that you can not only disassemble, but also assemble the equipment yourself, because this is the only way to ensure its normal operation. This will allow owners to save money on complex repairs.