How to choose the right wicket gate for wood and other materials

Fence is required for any structure. It clearly fences the territory and does not allow it to penetrate it to anyone but the hosts. Thus, a personal space with an entrance through a gate or gate is obtained.

How to choose a wicket gate? What do I need to know?

The wicket door is a small door that is installed in the fence. It is necessary to enter the territory on the perimeter of which the fence is installed. It is made of wood or metal. Usually a very simple wicket design is preferred. It can be seen everywhere in the countryside. The gate in the gate can be closed with a simple lock or hook, latch, if you do not want to install the lock.

From what material the gate is made

Before choosing a wicket gate, pay attention to its combination with the architecture of the house. The gate must be reliable and strong. Therefore, it is very important to determine exactly what material it will be made of. They can become a tree, the surface of which should be painted with paint and must be impregnated with an antiseptic. Well, if you choose a fir or pine. The gate to the wooden fence should fit the style of the gate itself. The width of the wicket door leaves is usually from 90 cm to 150 cm.

The wicket for wrought-iron fence should not be installed in a wooden fence. It will look great with forged metal gates, with a stone fence or a wrought-iron grate. It should be noted that recently gates and wicket from metal are very in demand. They look beautiful and adorn their view with the whole fence. This cast iron is expensive, so most often the gate and the gate are made of cheap low-carbon steel. To protect this material from corrosion, it should be well primed and painted with paint. And yet I want to advise not to pursue cheapness. Remember that the gate and gate must be very strong and reliable. In style, design and size, they should be combined with a fence.

Gate in a fence made of wood and its installation

It is not superfluous to know how to make a gate in the fence itself. When installing a classic wicket, it is enough to make two pillars of iron or wood. They must first be impregnated with a substance that protects the material from rotting. Then the wicket should be placed between the blanks of the desired diameter. Before installing the wicket for the fence, all of its details must be aligned. After this, it is possible to proceed with the temporary fastening of the columns with horizontal straps in the number of three or more pieces. To fasten the iron posts to the gate with wire, and to nail to the wooden ones. The pit for the pillars should be dug by the size of the width of the wicket itself. At the bottom of the pit, put the broken brick, pebbles or rubble.

Assembly of the wicket itself

Pay attention to the presence of a gap. It must necessarily be between the ground and the lower rail of the gate. Strengthen the pillars, spacers fixing them in the pit. After that, prepare the cement mortar and fill it in the pit, well ramming and giving the pillars good stability. Once the solution is well seized, you can begin to fasten the hinges and install a gate for them on the fence. If there is only a gate in the fence, and there is no gate, you can make an easily detachable fence in the fence in the fence. This will ensure the entry of the machine.

Before installing the wicket for the fence, determine in advance its width. It is desirable that it allows to enter the territory of the site on a bicycle, motorcycle, with a baby stroller, etc. Entry into the territory must be made of a hard coating.

For garden areas, the best option is to install a swing gate with a wicket door.