How to change the lock: tips and tricks

Every second person is familiar with this situation: he came to his home, and the lock does not open, or simply there is no key. And what to do in such a difficult situation? Change the lock in the front door or take any other action? Depending on the situation, several simple options have been developed. Sometimes you can manage yourself, without help.

What to do?

In the case of losing the key, you need to change the lock, but for now use the tools that are available at hand to open the front door. Depending on the structure, certain and uncomplicated manipulations are carried out:

1. Use a drill. It is required to drill a small hole above the keyhole. This is done in the case of equipping the entrance door with an internal lock with a cylinder. After drilling with a picklock, a lock is caught and the hook moves. This hole can be drilled in the cylinder. A small piece of wire is inserted into the hole and turns in the direction of opening the door lock.
2. Use a simple screwdriver. With a tongue in the lock mechanism, the screwdriver is an effective tool. The tool needs to be pushed inside, hook the tongue and drive it into the keyhole. At the same time the door stretches on itself, and then opens. Instead of a screwdriver, you can use a plastic card.

Actions before changing the lock

When using the lock lever , the following procedure is required. This method is completely different from the instructions on how to change the ignition lock, so take a closer look at the instructions.

Changing the ignition switch is another. Necessary:

• Loosen the bolts.
• A key in position No. 1 is inserted into the brand-new ignition lock.
• Then the fastening to the steering column is carried out.
• If all is well, then the bolts are tightened until the heads are detached.

And to change the door lock is much easier:

• Pull the door handle to yourself, slightly, sliding the door from the box as far as possible.
• Carefully insert a thin tool into the slot.
• Push the handrails inside the door lock.

If there is a door lock with a latch in the form of a handle, you need to unscrew the locking mechanism and carefully remove it. Then the metal panel that closes the mechanism is removed, and the screwdriver or pin squeezes the latch, helping to open the front door.

Remember: to prevent unnecessary problems with the lock, you need to purchase a machine without a keyhole, which is a good thing in the modern world. Today, a huge selection of goods is provided.

Tools to replace the lock

The second common problem in which it is impossible to open the door is the breakdown of the key in the keyhole. This can happen because of a variety of different reasons, and therefore, the solutions will be completely different. Consider many questions: how to change the larva in the castle, what tools are needed and much more.

What do you need?

If you carry out the replacement of the door lock yourself, you need to have at least simple tools at hand. Replacement requires the following:

• Pliers.
• Saw.
• Saw a jig saw.
• A crowbar.
• Screwdriver.
• Drill.

Of course, such tools, necessary to change the larva of the door lock, may not be at hand. But then you should resort to the services of a neighbor on the landing.

Procedure for replacing the lock

To replace the lock, certain tools and actions are used. How to change the lock or how to remove the key? Here are the popular variants of problems and solutions.

1. At replacement it is necessary to adhere to following actions: it is necessary to pull out a larva, to remove a bolt on an end face of a lath, further a larva probably easily and without special problems to take out.
2. Now we need to dismantle the slats: unscrew the fasteners-screws, remove the handles and the slats.
3. The next step is to unscrew the fasteners and carefully remove the door lock case.
4. With the mechanism that is extracted, you need to urgently go to the supermarket or the nearest construction store to purchase a similar lock (this will save you from the most complicated work on fitting).
5. Often happens and so, that at acquisition of the brand new door lock there are incidents. It's a bit different from the previous one, and replacing it will be a bit problematic. But nothing! With this, too, you can cope! It is necessary to adjust everything. A brand-new body is used in a groove that exists, and we look, whether its expansion is important. In no case should the hull touch the walls.
6. The next stage is fitting the end plate.
7. Drill holes of the diameter we need, then simultaneously mark the location of the holes under the larva of the new lock. Unnecessary immediately delete.
8. After everything is adjusted to the elements of the lock, it is worth starting to assemble a new mechanism.
9. We insert the case and fasten it with two screws at the end of the door. How to change the larva in the castle?
10. We need to install the larva, tighten the fixing screw also on the end of our front door.
11. Then insert the axis of the installation of the input pens and the latch drive, put on handles with decorative laths and tighten the screws tightly. Fix the counterplate in the door frame.
12. And the most recent stroke in the work entitled "How to change the door lock" is that you need to check the smoothness of the door lock. The key is rotated without any jamming, the crossbars move without any flaws. Everything is fine and beautiful, the work is done qualitatively and competently.

Conclusion

In conclusion, I would like to note that if you did not manage to change the lock yourself at the door, then you can and should apply to the services of a specialist. Masters qualitatively and competently perform everything themselves - they will come, take the key from the internal or external lock and open the door or just change the door lock. For this work they will be charged the minimum payment.