How to assemble the shower?

It's no secret that not every apartment in this or that house has a large area. That is, to install a luxurious bath, some people simply do not have free space, so in this case the shower comes to the rescue. By and large, it can completely replace the bath, but on the condition that all installation work will be done correctly. After reading this article, you will learn how to assemble the shower in your own home. After all, the services of professional masters can not be so cheap, and they can be awaited for a long time, since they have a lot of orders.

So, first of all, you need to get acquainted with the instructions for installing a shower enclosure, which must necessarily go in the kit. Without an instruction, it is strongly recommended not to start the assembly and installation of the cab, as this can lead to incorrect connection of certain units. Next, you need to check that you have all the necessary parts. Do not assume that if the shower is bought in the store, then everything necessary will go in the kit. Perhaps, some elements of the design, in particular, fasteners, will need to be bought separately. It is also necessary to have at hand all the necessary tools, so that later you do not have to look for an adjustable wrench or something else in an emergency.

Now you can safely proceed to assemble the shower. In fact, it consists of a frame, a pallet and a mixer. The frame is assembled strictly according to the instructions, and set on a pallet. Next, it is necessary to connect the sewage drainage of water, for this purpose it is necessary to choose the clutch of the desired diameter (it all depends on the manufacturer of the booths) and tighten it well at the bottom of the pan. Failure to comply with this requirement can lead to a leakage of waste water under the cab tray, which will inevitably lead to an increase in humidity and accelerated wear of the product. Well and about such concept, as a unpleasant smell, and at all it is not necessary to remind. Now you can proceed to such an action as connecting the shower cabin to a water source.

Regardless of what sources you use, whether it is centralized water supply, well, etc., you will need to familiarize yourself with the operating manual of the cabin. After all, it's not so difficult to find out how to assemble a shower and connect it to water supply, but to implement all agreed recommendations - here you need to exert maximum effort and patience. Be sure to use only reliable hoses and connections, do not save on the quality of these units, since repairs will later cost you much more. After the installation of the shower enclosure is completed, it is necessary to operate it for a while, and then once again check all the connections and, if necessary, tighten them.

This is a very important advice, because many masters know not only how to assemble a shower cabin, but also what actions to perform after assembling during operation. At the end of the article, it should be added that some shower booths have additional functions, such as a whirlpool, a turntable, lighting, etc. That is, it will necessarily need to bring electricity, so here you also need some knowledge. When installing electrical wiring, be sure to use only new and reliable wires of the appropriate diameter. And do not forget about grounding, as this is also important. So, now you know how to assemble the shower in the home without the involvement of professional installers. If you have any unresolved questions or doubts, then before installing the cab, be sure to ask the knowledgeable people. And most importantly - the installation of a shower cabin with your own hands will not only save you a certain amount of money, but also bring a lot of pleasure from the work done!