How to apply thermal paste?

Modern computers have a fairly complex device, however, many problems associated with their work can be handled independently. In this article we will look at how to correctly apply thermal grease. It allows you to maintain the correct temperature of the machine while the system is running. However, improper application of thermal paste can damage the computer.

The question of how to correctly apply thermal grease is very relevant today. Proper application of the thermal paste layer is one of the most important criteria for good processor cooling. No matter how cool the cooler is, the wrong layer will reduce all efforts to ensure the required temperature.

Application of temperature

Let's start with how to properly apply thermal paste.

• Its layer should be applied to the entire surface of the radiator's contact with the processor or other chip evenly;

• The layer of thermal paste must be thin enough;

• Such a layer must be integral, that is, do not have thermal discontinuities, naked spots, and so on.

If the application of the thermal paste is not performed correctly, it may cause the computer to malfunction.

The process of applying thermal paste

To perform this work, the user will need a tube with thermal paste, a plastic card and a surface where the paste will be applied.

First, take a tube of paste, squeeze its contents onto the surface of the processor from one edge to the other by a straight line.

Care must be taken to ensure that the line is not too thin or thick. In the first case, the thermal paste may not be enough for the end of the processor, and in the second case the layer will be very thick.

After drawing the line, we take the card, press down its edge so that it bends to the surface behind the paste. This is suitable for a conventional plastic card. Then slowly, without decreasing the force of pressure, one-by-one smears the thermal paste from left to right.

As a rule, the result will be perfect right away. In the event that something does not work out, the process can be repeated, after removing the paste from the processor. In order to make the layer thinner and more uniform, you can draw a card on the surface of the processor several times. In this case, the cooling of the processor will be most effective.

It is important that all surpluses of thermal paste that fall outside the surface of the processor are removed. In addition, you should closely monitor your movements, so as to accidentally stain your fingers with dirt, do not mess it up with the motherboard. To remove excesses, you can use a cotton pad or a loose cloth.

In the described case, it is not necessary to apply thermal grease onto the cooler radiator. That is, the paste is applied either to the processor or to the radiator. Two layers of thermal paste should not be done. These are the basic rules for how to correctly apply thermal grease.

It seems that everything is quite simple and understandable, but often in ordinary services simply drip thermal paste on the surface of the processor. For a while, maybe the processor will work. However, it will soon come to an inoperative state due to overheating.

As for the question of how often it is necessary to change thermal grease, then it should be experienced about once or twice a year, but only if the temperature regime is normally maintained, there is no overheating and the temperature is approaching the critical temperature. If the temperature of the process often approaches 70 ° C, then the paste will have to be changed much more often.

We hope that this article helped to answer the question of how to apply thermal paste properly. Any user can quite cope with this independently. It must be remembered that you should take very seriously all the recommendations of specialists, if you do not want to harm the computer.