Household and industrial ironing presses. How to choose ironing presses? Reviews about ironing presses

For dry ironing of products special presses are used. To date, distinguish between domestic and industrial models. By design, they can be quite different. If we consider household devices, then they are able to work with cotton and wool. In this case, capron will be dried for a long time. The household models differ in their compactness. Their designs are usually provided by the manufacturer in a demountable type.

If we talk about industrial models, they are pretty much in demand in laundries. Also they are often bought for dry cleaners. The total pressure they withstand is large. In this case, the dimensions of the working platforms can exceed 800 mm. In order to learn more about the press, you need to consider the advantages and disadvantages of household as well as industrial models.

Important differences of household devices

The advantages of domestic presses include their small size. Their efficiency at the level of 80%. At the same time, the readiness time depends on the type of ironing platform. Typically, the pressure of such devices can be maintained at 8 bar. Water tanks for models are connected to different capacities. If necessary, the height of the table can always be adjusted quickly. Minuses of household presses include low steam productivity. A good model is worth an average of 30 thousand rubles.

Features of industrial models

Industrial ironing machines are primarily known for their performance. In this case, the operator is able to process more than 200 products per shift. The vapor pressure of such devices is maintained at 15 bar. Directly pressing the board is fully automatic. The frame of industrial presses is very sturdy and can withstand large loads. The lower plate in the devices is usually installed with heating. The vacuum is most often found in the built-in type.

Directly working platforms are installed heat-resistant and can work for a long time. Steam generators for industrial modifications are available approximately 20 liters. In some cases, they work from the pump. On average, the capacity of industrial presses reaches 13 kW. Many devices are equipped with a modern protection system for the safe operation of the operator. The disadvantages include large dimensions of presses. On average, the laundry model weighs around 350 kg. The length of the installation can reach 1500 mm. On the management of industrial ironing presses are quite different. A qualitative model around 4 thousand dollars will go round.

How to choose a household model?

For the house is best to choose a compact model. The maximum frequency in the device documentation should be indicated at 50 Hz. In this case, the voltage must be 220 V. Also pay attention to the dimensions of the ironing platform directly. Its minimum width should be 250 mm. All this will make it easy to lay clothes. The steam output of the model can fluctuate around 80 gr / min. In this situation, it is important to take into account the press availability. This parameter is usually 5 seconds. However, in this case, much depends on the manufacturer.

If we talk about sliding modifications, then before buying, you should check the container with water. The tank should be easily detached and fixed to the model. Lastly, the device racks are inspected. Collapsible models are usually made with rubber pads to ensure that the device does not slip and was stable. Pick up an electric press (ironing) for the house follows the price of 30 thousand rubles.

Selection of industrial press

How to choose an ironing machine for dry cleaning or laundry? In fact, industrial power models are quite different. In this case, much depends on the amount of work. If we talk about professional models, then the power parameter fluctuates around 15 kW. The clamping must be done automatically. The strength of the lower frame should also be checked. Stands in industrial presses, as a rule, are absent. In this case, the heating plates are installed on average about 1000 mm in length.

Before buying a product, pay attention to the steam generator. Recently, specialists prefer modifications with a pump. Their performance is quite high. Operator hands during operation must be protected. For this device is equipped with special flaps. In some cases, models have a connector for connecting steam irons. All this will allow more professional processing of cotton products. In the end, it should be noted that the normal model for dry cleaning around 4 thousand dollars will cost.

Products of the brand Electrolux

This company mainly produces household ironing presses. In this case, the compactness of the model is quite different. With the press generators the company does not. On average, the frequency of the models does not exceed 55 Hz. The household ironing presses of the presented brand are operating from the 220 V network. If you believe the consumers' reviews, then they cope well with cotton. It should also be noted that the market has many dismountable devices.

Their legs are all rubberized and there is no stability problem. The heating platforms may vary in shape. On average, the steam productivity parameter fluctuates around 80 gr. in a minute. The quality of the top covers deserves special attention in the devices of the presented company. They close tightly enough, the latches wear out slowly. There will be an ironing press for the house of the company presented in the area of 30 thousand rubles.

Press review Electrolux FPA1-D

For compactness, this ironing press for home reviews deserves good. With cotton this device does it normally. The performance parameter of the model is at an average level. If you believe the opinion of buyers, the tank disconnects quite quickly. If necessary, the height of the rack to adjust there is a possibility. The model also has a water supply function. Full availability of the model - after 5 seconds. If necessary, the cover can be closed very tightly. The protection system for this device is installed good. Worth this ironing press for home to date, no more than 35 thousand rubles.

Opinions about Electrolux FPA2-D

This ironing press for home reviews has a wide variety. The nominal power of the device is only 6 kW. All this indicates that the clothes are being dried for a long time. However, there are also advantages to the model. First of all, it should be noted that the weight of the top cover is small. If desired, it is removed quite simply. Also, the user is able to adjust the height of the lower platform. The water supply can be adjusted.

Parameter of steam productivity is at 75 gr / min. For dry cleaners such devices do not fit uniquely. However, they can be used for domestic use. In the assembled form, this press does not occupy much space. If desired, the water tank can always be disconnected. Another advantage of the model can safely be called quick drying of wool. In this case, the ironing device can withstand a pressure of 5 bar.

What do they say about Electrolux FPA3-D?

These ironing presses are good reviews for high power. Parameter productivity of steam devices is exactly 80 gr / min. The cover of the model is quite wide. In this case, cotton is processed quickly. If necessary, nylon can also be used for drying. Woolen things in this press is better not to put. Total pressure model can withstand at 50 bar.

The lid of the model closes rather tightly. If necessary, the user can adjust the heating power. Also, the difference between the models is considered to be a strong stand. The lower platform is adjustable in height. Waiting for the device to be fully ready takes no more than 6 seconds of time. Weigh the assembled steam ironing machine Electrolux FPA3-D exactly 18 kg.

Reviews about Elna Opal

The Elna Opal ironing press differs from other models with the availability of special water cartridges. The working platform is not very wide. If necessary, the user can adjust the water supply. The system can withstand a total pressure of 50 bar. In the standard set of the device a cover is available. Pulverizer in the press provided for the usual. Temperature control in this case is an electronic type.

The user can monitor the maximum temperature of ironing. Cotton use in this model is possible. In this case, the device successfully manages the wool. However, it should be borne in mind that the performance of the model is small. Therefore, for the dry cleaning device will not work. It is worth this ironing press for laundry around 28 thousand rubles.

Domena presses

The given company is engaged in manufacturing only industrial presses. The clamping in this case is carried out in an automatic mode. To adjust the power of the device in the models there is a special panel. If desired, the operator can adjust the height of the top platform. For dry cleaners, many devices are ideal. The reservoirs with water are quite different in capacity. Also models are made with different pillows.

For cotton manufacturer made ironing presses of the KR series. Their shoes are made convex. Directly the frame of the presses may differ in height. The steam productivity parameter is on the average 90 gr. in a minute. Steam generators exist with different capacities. Protection from the hands of many models is available. There are ironing presses Domena in the area of 5 thousand dollars.

MIE ROMEO II Reviews

Ironing machines MIE ROMEO II for home use are ideal. Their power is low, but the quality of the work is good. With wool, this model is doing fine. It should also be noted that the clamping is carried out rather quickly. Expand this device very easily. If necessary, the top cover can be disconnected.

The lower platform heats up to a maximum temperature in 5 seconds. If desired, you can adjust the height of the rack. The vapor pressure of this model can withstand at 3 atm. Dimensions of this household press is very compact. At the same time, the electricity model does not consume much. The press presented at the market is about 38 thousand rubles.

Astra presses

This company is most specialized in the production of models for laundries. They differ by wide platforms and powerful clamping devices. However, the control of the models is quite simple. If desired, the power of the heating element can be adjusted. Also note the presence of a heat-resistant layer on the platform. Thanks to a reliable security system, you can work safely. According to the owners of the device, the pillow warms up very quickly.

Reviews of the model Astra KP-521

Many consumers, this ironing press for laundry is chosen for an excellent steam generator. In this case it is provided for the pump type. If necessary, you can remove the top cover from the press. The protection system is switched on in automatic mode. The performance of the model is quite good, however, the indicator of electricity consumption is high.

The specified industrial press operates on a network with a voltage of 220 V. The vapor pressure of the device can withstand a maximum of 8 bar. Its dimensions are quite large. The weight of the model assembled is 290 kg. To buy this ironing press (industrial) there is an opportunity for 3500 dollars.

Features of the press Astra KP-516

For the presence of a large spray, these ironing presses get good reviews. There are quite a few modes in the device. If necessary, you can use the function of strong steam. With kapron this model copes quite quickly. If desired, wool can also be dried. If you believe the opinion of buyers, then the pillow in the presented device wears out extremely slowly. You can easily configure the bottom platform.

The parameter of the model's performance is 0.9 sq. M. Meters per minute. The rated current system can withstand 5.5A. The average power consumption is 0.7 kW. Directly the shoe in the device has a maximum temperature capable of withstanding 200 degrees. Thermo-insulation layer on the upper platform is available. It is worth for today, this industrial press in the area of 4300 rubles.

Laco 30: specifications and reviews

This industrial press is most suitable for drying nylon. In this case, the temperature for this fabric is chosen to be 115 degrees. Platforms for the presented device do not weigh much, and therefore rise quite quickly. However, the clamping force of the pillow is small.

The pressure parameter is only 5 bar. If you believe the reviews of consumers, then for cotton this will definitely not be enough. The nominal voltage of the household press is 230V and the rated current is 5.5A. The average power consumption is 0.8 kW. The steam generator in the model is not installed in the built-in type. The control panel is simple.

If necessary, the operator can quickly stop drying. The connector for connecting the iron to the model is available. The protection in this case is of the automatic type. The ironing plate is installed with built-in vacuum. According to the owners of the model, the device is very simple to maintain. In the market, this user can buy this press for $ 4,200.