Homeliness, Tools and equipment
Head for trimmer: types and description
One of the most common devices for cutting grass is the trimmer. It is very easy to operate and maintain. That's why it became popular among the population. Its significant advantage is its low weight. Even a child can cope with such equipment.
What it is?
The trimmer consists of a cutting element, a rod, an engine and a handle with a control mechanism.
Specifications
The main technical characteristics of the trimmer are:
- power;
- Weight of equipment;
- Type of power (from the network or using a battery);
- Engine layout (top or bottom);
- Type of cutting element;
- Rod type.
All this must be taken into account, to buy this or that device.
How to choose the right one?
Before buying this equipment, it is necessary to understand for what purposes it will be used. For a large area with an even lawn, it is better to buy a light model with a small capacity. If you want to improve the villa site, then you need to choose a model more powerful.
Cutting tool
For the cutting process to occur easily, it is necessary to choose the correct cutting element.
Trimming head trimmer
It is a special assembled coil, inside which is a cord.
Kinds
The head for the trimmer is classified by the method of feeding the line:
- Manual. In this case, the name speaks for itself, that is, the filing of the line takes place mechanically. To make the cord even longer, you must stop the trimmer and manually pull out the ends.
- Semi-automatic. If you want to replace the cord, you need the head for the trimmer to touch the ground. At the same time, a special button is pressed and the anchor mechanism is opened. Further, the cord is elongated due to centrifugal force. The main feature is that the procedure occurs when the trimmer is on.
- Automatic. To extend the cord, reduce the engine speed. Further, when increasing them, the line is fed automatically.
From all of the above it follows that the hand mower head for the trimmer is uncomfortable.
Classification by refueling method
The head for the trimmer can have several ways of filling the line:
- Fast-charge. The new cord is reeled up without parsing the coil, that is, you do not need to remove it from the device. The end of the new element is caught in the coil and then wound up a certain number of times. When a specific value is reached, the cord is cut off. The head with a fishing line for a trimmer of this type is produced by Shindaiwa and Speed-Freed.
- Demountable. Here the name speaks for itself. To replace the new cord, you need to remove the coil from the equipment, then unwind the old line and wind a new one.
Design Features
It should be noted that the cutting head for the trimmer contains special arrows. They allow you to perform rotational movements of the coil in different directions. If there was a need to wind the line in the direction of rotation of the shaft, it turns into a specific position. A large number of wound cord threatens to break down the equipment. Two arrows are contained only on imported models. Now the market has heads with one arrow.
If, after hitting the semi-automatic head, the cord is not wound, then the previous winding is not performed correctly. That is, after the head for the trimmer was installed, the user did not pull the ends of the line from the grooves. Another unpleasant moment at the bevel of grass can be the sintering of coil turns.
For different trim models, a semi-automatic head is used, consisting of two parts - a body and a spool. Both elements contain springs. The second part can be executed in several variants:
- One-piece - both parts of the line are wound together;
- Two-section - each end is wound on a certain part; This species is most effective, since the line is not confused and does not cake.
There is a simple and cheap way to turn a single-section spool into a two-section spool. To do this, you need a solid plate. From it, you need to cut a circle whose diameter should be equal to the thickness of the spool. In this case, the thickness is taken near the place where the line is wound. This circle moves freely. Further, a cut is made on the ring, it is put on the spool and connected by means of glue or tape.
Similar articles
Trending Now