Fan for extract in the bathroom: prices, types, characteristics. How to choose a fan for a bathroom

Elevated humidity in the bathroom, condensation on the walls and floor - a picture known to many. If you are faced with such a problem, it is time to abandon the old ways to combat this phenomenon. It's time to take the most drastic measures. You need to purchase a fan for extracting in the bathroom.

Why Ventilation

Typically, typical bathrooms are not too spacious. Often you notice that a small room is instantly filled with steam. As a result, condensation settles on the walls, floor, and ceiling. Because of this deteriorates the decoration of the room, the walls appear mold fungus.

The bathrooms usually do not have windows. Consequently, the only way to supply fresh air is ventilation systems. However, often they are inefficient and do not cope with the load. To find out how much your ventilation system works properly, it is enough to attach a piece of paper to the grid that covers it. If he "clings" to her and will hold on for a long time, then your system is normal. If this does not happen, therefore, you need a modern fan-hood for the bathroom. This simple device will help you forever forget about the troubles associated with high humidity.

Extractor with fan in the bathroom: characteristics

Today the most famous and unfamiliar manufacturers offer various models of these necessary devices. They differ not only in price and design, but also in technical characteristics. Especially popular among consumers are models equipped with a timer. Since this is primarily an electrical appliance, it is absolutely undesirable for it to work 24 hours a day, especially if most of the day in the house is empty. The timer allows you to turn on the fan for stretching in the bathroom for a certain time, for example, for 15-30 minutes. There are models equipped with humidity sensors. They turn on when the air is oversaturated with moisture, and turn off after a certain period of time or when the desired result is achieved.

If you live in an apartment building, then it provides a system of own ventilation. It is designed for several floors and a number of apartments. In this case, it is advisable to install a fan for drawing in a bathroom with a non-return valve. This element will not allow air from the tube to enter the room, protect it from small debris, unpleasant odors.

Choosing an exhaust fan

Today on the shelves of building stores there is a huge selection of different devices from world famous manufacturers. They differ in their design, price, number of additional functions. How to choose a fan for the bathroom, so that it fully copes with the task assigned to it?

Axial fan

Such designs are reminiscent of a propeller. It perfectly pumped the required volume of air through a short ventilation tunnel. However, the installation of such a device on a concrete or brick channel, which passes through several floors on the roof, is inefficient. This model is more suitable if there is a good natural draft in the room and channels of no more than six meters in length.

Well-proven axial exhaust fans of a company such as Vortice (Italy). Their new Punto Four and Punto Filo models work quietly and reliably. These samples have check valves, but they do not exclude natural ventilation when the device does not work. The price of such samples varies from 2400 to 8200 rubles (depending on the availability of additional functions).

Centrifugal fan

If you want to quickly ventilate the room, and at the same time it is important for you that the device works quietly, you need a centrifugal fan for drawing in the bathroom. Such models have a very wide range of performance, different design, speed control mode. Available models are concealed or overhead, with humidity sensors and timers.

Such fans have an original design. Inside the plastic case is the so-called "snail", familiar to us by the huge industrial fans. It is small and almost noiseless. Fans of this type pump the required amount of air through the rough and long channel, and at the same time will work quieter than the axial ones. They are somewhat more massive, but if desired they can be hidden in the wall. Only the ornamental grid will remain in sight. Do not forget that the fan is not a design element, but an appliance that removes exhaust air from the bathtub.

Pay attention to the models of the company Vortice - Vort Quadro, Vort Press, Ariett. Fan-hood for the bathroom, whose price ranges from 4500 to 7000 rubles, operates at different speeds, has a humidity sensor and a timer. It remains only to choose the right device.

Ventilation fans for bathrooms: how to install

First of all, it is necessary to remove the grating covering the channel and, if possible, to clean it. If you can not do it yourself, you need to call specialists who will rise to the roof of the house and perform all the "black" work.

Attach the fan to the hole in the wall. If it does not enter a little, you can slightly expand the entrance to the channel or change it in the store to a more suitable one.

Now remove the grill and the screen from the fan. Install it in place, secure it with dowels or polymer glue. Connect it to the mains.

Tips for installing hoods

When installing a fan for the hood in the bathroom, you must follow certain rules to make the device work more efficiently.

1. Install the hood on the opposite wall from the door.
2. The fan must be located under the ceiling. In this case natural ventilation will help to work better.
3. When connecting the device to an electrical network, it is better to make a separate switch for it.

Today, customers are offered a large selection of hoods. Find the right option is easy. The fan-hood for the bathroom is a very useful and useful device. Having installed such a simple device, you will quickly appreciate its advantages.

Popular Fan Models

Today we want to present you some popular models of hoods for the bathroom.

Vents (Ukraine)

The 100 M3 fan with a rectangular front grille is designed for small rooms. Can be mounted on a wall or ceiling. The case here is made of ABS plastic, the 7-blade impeller is silent. The price is 1285 rubles.

Electrolux (Sweden)

The fan-hood for the bathroom is equipped with a humidity sensor, it works noiselessly. This sample and replacement panels for it are made of their ABS plastic. The model is very reliable. A timer is provided. The price is 2360 rubles.

SILENT (Spain)

Noiseless fan-extractor 100 SR is by far the most popular sample. Has a back flap valve. Works at temperatures up to +40 degrees. The price is 4850 rubles.

Ballu (Russia) series BN-100T

Designed to remove the exhaust air through channels with a diameter of 100, 120, 150 mm. It is made of ABS plastic, has fuses and a high-performance impeller. The price is 1650 rubles.

Marley (Germany) SV-100

This model consumes little electricity (only 1 Watt). The settings are made using the touchpad located on the panel. Sensor technology eliminates contact with conductive elements.

All Marley fans are distinguished by their long service life, they work quietly, installation is simple. The price is 9570 rubles.