Error code 0x80070035, "Network path not found"

Once it happens, when you come home after a hard day's work, you want to surf the Internet, and instead a window with the inscription "error 0x80070035, the network path is not found" pops up. However, do not despair, there is a way out.

What is the error code 0x80070035

Let's understand. Error code 0x80070035 occurs because the computer does not find the network path, i.e., can not connect to the Internet. It can look like this:

There may be several reasons for the problem:

- IP address conflict;

- problems with the router;

- problems with the network card or its drivers;

- antivirus connection blocking;

- The problem with the provider.

To solve such a malfunction in the work is not difficult, it is worth taking a few simple steps.

IP Address Conflict

You can also see the error code 0x80070035 with the "IP address conflict" tagging , but it may not be. This happens when a new computer is connected to the network and takes an IP address that is reserved on another computer. This usually happens in organizations where all machines are connected to a common network, and addresses are randomly distributed. But this can also happen with a home PC. The problem is solved by the fact that you need to take yourself another, free IP address.

On Windows 7, this is done as follows. We go to the control panel and follow the "Network and Internet" section. There click on the "Network and Sharing Center". In the right column, select "Adapter parameter changes", then find the desired network connection and go to its properties. From the list, select Internet Protocol version 4 (TCP / IPv4). The address written there is best somewhere to record or photograph just in case.

We put the dot on the automatic receipt of an IP address and a DNS server. Click OK. Now the connection should resume. If this does not happen, return the old IP back and then look for the reason.

Problems with the router

Very often error 0x80070035 occurs because of problems with the router. There are some models that can often lose a network. This problem will be helped by an ordinary reboot. The procedure is performed in two ways:

• Via the admin panel. In the address bar of the browser, enter 192.168.1.1, after which we write the login and password for access. It can be found in the passport to the router. Very often login and password are the same - admin. Then you should find in the menu item reboot (usually in the administration section or system tools).

• Go to the router, turn it off, and after 5 seconds. Include.

Sometimes it happens that the Internet is restarted after the router is turned off and after 5 seconds it is turned on. It is worth a try, if nothing helps. If this connection failure occurs again, it is most likely the fault of the entire router.

Because of the p-node mode

Another problem 0x80070035 Windows 7 may be that the PC uses the p-node method to determine the resolution. You can check it as follows.

Go to the "Start", in the standard find "Run" (or type the combination of keys Win + R). In the window that appears, enter the command "cmd". In the command line enter "ipconfig / all", press Enter. If the report specifies a peer-to-peer node type, then the computer is in the p-node mode. You can change this in the register.

It will take the same program "Run". In it we enter the command "regedit", then the window for editing the register will open. Further we go the following way: HKEY_LOCAL_MACHINE // System // CurrentControlSet // Service // NetBT // Parameters. In this folder, remove the values of DhcpNodeType and Node Type, after which you need to restart the computer.

Antivirus blocking

It happens that the network connection is blocked by the antivirus, causing the code "0x80070035: the network path was not found". Basically it is done by such well-known programs as Kaspersky and NOD32. You can check this by disabling the anti-virus for a while. If the Internet has appeared after that, you should go to the anti-virus program and disable the control over the internetworking traffic. Or change the program itself. The blessing on open spaces of a web is enough of them, including free.

Faulty drivers

Sometimes error code 0x80070035 happens due to a problem in the driver of the network card. You can see this in the device manager. You can find it by going to the properties of my computer. A window will open, in the left panel of which you need to select "Device Manager". Open the list of "Network adapters".

If the driver of the network card has a yellow exclamation mark, then it must be fixed, updated or reinstalled. The driver can be found on the website of the motherboard manufacturer or the PC itself (if it is a laptop).

Problems with the provider

Do not forget about the provider of network services. The problem may be somewhere on the line, although this happens very rarely. Therefore, if everything has already been tried and does not help, it's worth calling a tech support to your provider and finding out why there is no network connection. Usually they notify all technical work in advance, but the malfunction can arise quite unexpectedly.

Can not connect to remote printer

It is very convenient to have a connection to a remote printer. Advantages are enough: you do not need to connect it directly, when there is not enough space already, and you do not need to run from computer to computer with a flash drive for printing. However, the already known network error 0x80070035 can occur in this case.

The first step is to make sure that the printer is turned on and the computer is up and ready (not in sleep or standby mode). After that we check the availability of the Internet. It's clear that without it you can not connect to the device. Next, you need to check the printer settings. To do this, on the computer connected to the printer go to the "Start", in the right menu click on "Devices and printers". Right-click on the desired device and click on the "Printer property" (located approximately in the middle). In the window that appears, go to the "Access" section. Here we look, whether there is a general access, whether the network name coincides.

If everything is okay there, and error code 0x80070035 does not go anywhere, go to the Control Panel. We go to the "Network and the Internet", where you need to go to the section "Change additional public settings." There you need to enable shared access to data and printers, network environments.

If this did not help, then you should remove this printer and install it again.

Summarize

This problem is not that difficult, and it usually resolves by switching to an automatic IP address or rebooting the router. But if the two described simple methods did not help, then it's worth going into a solution to the problem.